The Information in this post is based on our cost. ALLBRiGHT 1-800-PAINTING serves the Greater Los Angeles Area, and our cost tends to be pretty competitive with most professional painting contractors in this region. You can always find “cheap” painting cost, but typically those estimates will be missing key things such as proper licensing, insurance, worker’s compensation, or untrained painters.


Perhaps you don’t know what you want to do, but you know you want a change. If so, you’ll love our color consultation, a free service that comes complimentary after you receive a free quote and sign a contract. A professional colorist will analyze your living space and make recommendations on what colors will work best for your home; you can then work with the colorist in choosing a final plan for your home interior.
Add a stunning splash of color to your Add a stunning splash of color to your home's interior accents with BEHR PREMIUM PLUS ULTRA Interior Semi-Gloss Enamel. This radiant sheen will help you create a sleek reflective look that brings maximum impact to trim windows and doors as well as indoor furniture and cabinets. Get the beautiful color ...  More + Product Details Close
Sorry it is difficult to trust almost anyone in the trades. It is easier to do the work myself and not deal with strangers in and around my house. When I have to hire someone I tell them up front that I'll be checking every detail, pay extra to purchase the materials myself, and if they don't want the job - well good! I always fine someone who will work with me as I pay a bonus for that.
Paint preparation is the foundation for the entire job — if done correctly your paint will perform to its fullest potential. If done incorrectly, the best paint will crack, peel, or chip easily. Make any necessary repairs before you start your painting project. Dirty walls should be cleaned, especially near the stove and sink. Greasy deposits and soap scum can interfere with paint's adhesion.
"Modern paints dry too quickly, and are difficult to brush out," says Dixon, who uses paint additives, such as Floetrol for latex paints and Penetrol for alkyds. "Adding a few ounces per gallon slows drying time and makes the paint more workable," he says. Another problem is bridging. "Latex paints form a skin," says Dixon. "Removing painted tape can tear the skin, resulting in a ragged rather than a sharp line." Lastly, taping takes time. "Learning how to cut in with a brush takes practice, but if you can do it, you'll leave most tapers in the dust," Dixon says. (Cutting in is painting just the surface you want, not the surface adjacent to it — for example, where a wall meets the ceiling.) Although there are mildewcide additives, our pros prefer using bathroom and kitchen paints that have built-in mildew fighters. "These paints will prevent mildew from forming, but they won't kill mildew that's already there," Dixon points out. Because leftover mold spores can live beneath the paint and eventually work their way through to the surface, you should also prep bath and kitchen surfaces. First, wash down the walls with a bleach solution (3/4 cup of bleach per gallon of water) then seal with a stain-blocking primer, such as Zinsser's Bulls Eye 1-2-3 or Kilz's Total One.
Most painting companies, including our own, do not price our work on an hourly basis. We can work this way and do on complicated projects. But to give you a good idea of what the hourly rates tend to be, these range from $45-60 a man/hr. Then you have to factor in the cost of materials. This tends to range from 10-20% of the cost of the job depending on the level of quality.
Having supplied paint and sundry goods to Warline for over 10 years, we have found them to be of the highest integrity in the painting industry. Very refreshing to come across in this day and age. By default they will always go to the best in class products for their clients even when cheaper substitutes are available. We would highly recommend Heidi and Warren for any sized painting project, whether it be new construction, repaints, exteriors and decks as well as kitchen cabinets. Their work will impress even the most discerning client. Their levels of service and professionalism are second to none.
Thanks, all, for your time & efforts adding to the article & comments, especially Dave urging requesting both General Liability AND Worker Compensation insurance certificates to protect from real & fraudulent liability--from my experience especially in California, where insurance fraud is a popular income thief, even causing car collisions to collect.
"Modern paints dry too quickly, and are difficult to brush out," says Dixon, who uses paint additives, such as Floetrol for latex paints and Penetrol for alkyds. "Adding a few ounces per gallon slows drying time and makes the paint more workable," he says. Another problem is bridging. "Latex paints form a skin," says Dixon. "Removing painted tape can tear the skin, resulting in a ragged rather than a sharp line." Lastly, taping takes time. "Learning how to cut in with a brush takes practice, but if you can do it, you'll leave most tapers in the dust," Dixon says. (Cutting in is painting just the surface you want, not the surface adjacent to it — for example, where a wall meets the ceiling.) Although there are mildewcide additives, our pros prefer using bathroom and kitchen paints that have built-in mildew fighters. "These paints will prevent mildew from forming, but they won't kill mildew that's already there," Dixon points out. Because leftover mold spores can live beneath the paint and eventually work their way through to the surface, you should also prep bath and kitchen surfaces. First, wash down the walls with a bleach solution (3/4 cup of bleach per gallon of water) then seal with a stain-blocking primer, such as Zinsser's Bulls Eye 1-2-3 or Kilz's Total One.
@Neil What is the use of repeating lessons when there is so much more to be learned? Technology has moved on from the adz. Plumbers use PEC, insulation is sprayed, glue-lams allow for open floor plans and furnaces are no longer stoked with coal. As for the new people, if these trades cannot attract fresh blood we will all be unable to get homes built and repairs made. I don't yearn for my first home with the leaky concrete block foundation, failing well pump and an oil furnace held up by the plenum. I'll take heat pumps, solar panels and PVC waste pipes any day.You can get all the sill plate repairs and flitch beams demos you need on YouTube.
Dave, you said it best! Every pro painting contractor truly worth their salt would and should cut and paste exactly what you say here about where customary and legitimate practices and expectations should be in regards to what customers should expect from contractors and how contractors should professionally deal with their customers. By the way, Dave, if you work in the Atlanta area, I would like to hire you! Thank you for your valuable advice!

As an owners rep and former estimator for a gc i do expect to pay a reasonable deposit say 10 percent and then weekly progress payments. I am asking the painter to book his time and to do the work on my schedule. Most painting companies are not huge operations they will pay their staff weekly. For most repaints i ask for one tinted primer coat and one finish coat for 100 percent coverage. New work gets one tinted primer and two finish coats for 100 percent coverage. The cost of the paint is not really that different for colors or finish. Brands like european fine paint and C2 are more expensive than Ben Moore and sometimes more difficult to roll based on their consistency. Some home depot brands are as expensive as the Ben Moore and of equal quality others aren't. Red paints are notorious for number of coats required and special priming requirements.


Sand the trim with a fine-grit sanding sponge. Sponges get into crevices where sandpaper can’t go and let you apply even pressure. Then apply the first coat of paint, let it dry at least 24 hours, lightly sand it again for a completely smooth surface, and apply the second coat. After each sanding, vacuum the trim, then wipe it down with a tack cloth to remove the dust.
Paint won't bond to greasy or filthy surfaces, like kitchen walls above a stove, mudrooms where kids kick off their muddy boots and scuff the walls or the areas around light switches that get swatted at with dirty hands. "I always use a degreaser to clean grimy or greasy surfaces," a pro tells PM. "It cuts through almost anything you have on walls for better paint adhesion."
There are two common types of paint that are available for interior projects: smooth and durable oil-based paints and lower-VOC latex paint. Latex paints are used in most residential settings as they dry faster and are easier to clean up. Oil-based paints are harder, making them a good option for trims, floors and furnishings. In addition, there are 5 basic finish options that identify the sheen and hardness of paint. Matte finishes have the least sheen. They are great for hiding imperfections in walls and ceilings, but are the hardest to clean. Eggshell and satin finishes provide more reflection and a smoother surface for easier cleaning, while semi and high-gloss paints provide the highest amount of sheen and durability.

I do not mean to come off with an edge, however, this is an article for people hiring low bid, uninsured, one man band painters out to "hustle" a buck. Hire reputable, established companies or hire someone you know or have a strong referral from. If you are arguing over watered down paint, ticky, tacky deposits, buying your own supplies, you have hired the wrong guy.
Paint won't bond to greasy or filthy surfaces, like kitchen walls above a stove, mudrooms where kids kick off their muddy boots and scuff the walls or the areas around light switches that get swatted at with dirty hands. "I always use a degreaser to clean grimy or greasy surfaces," a pro tells PM. "It cuts through almost anything you have on walls for better paint adhesion."
I can not say enough about the quality of service we received from Warline Painting. We have a renovated house with new drywall - floor to ceiling. I quickly learned that not all drywallers are as meticulous as they should be when it comes to the finished surface. Warren and Amir worked with me to ensure the end result was perfect. They completed my project within the timeframe promised and on budget. That was a first for my entire renovation! I highly recommend Warline Painting to anyone who is looking for a quality painter.
Primers aren't just diluted paint. They're formulated to establish a solid, even base, seal stains and ensure that the topcoats of paint go on smoothly and bond securely to the surface. "Most homeowners use latex primers, but the pros stick to alcohol and alkyd primers because they'll cover almost anything," says John Weeks, of John the Painter in Mobile, Alabama. Primer can affect the appearance of the topcoat. "It's okay to spot-prime the ceilings but not the walls, because primed spots will show," adds Span.
Recently I had my kitchen cabinets painted with Warline. The workmanship is incredible. They were always on time, very considerate and managed all the details of my project with great care. During the entire process Heidi made me feel as though I were her only client and always made me feel at ease. I can't recommend Warline enough, and will be calling them every time I need painting.  
I was a painting contractor for many years and never asked for a deposit upfront. A good contractor should have great credit with his suppliers and an even better contract if the deal should go south before the job is done. Get to know your customer and explain how each paint covers so they understand fully before you have to apply 3 or 4 coats. If you didn't bid your job right and the client has already signed the contract then that is on you not the client. Yes I haven had to eat the difference but the client was happy and a return customer for years so I made up for it.
Sorry it is difficult to trust almost anyone in the trades. It is easier to do the work myself and not deal with strangers in and around my house. When I have to hire someone I tell them up front that I'll be checking every detail, pay extra to purchase the materials myself, and if they don't want the job - well good! I always fine someone who will work with me as I pay a bonus for that.
Add a stunning splash of color to your Add a stunning splash of color to your home's interior accents with BEHR Premium Plus Ultra Interior Semi-Gloss Enamel. This radiant sheen will help you create a sleek reflective look that brings maximum impact to trim windows and doors as well as indoor furniture and cabinets. Get the beautiful color ...  More + Product Details Close

DON"T EVER PAINT THE WALLS TO FRESHEN UP YOUR HOME & NEGLECT THE TRIM, MOULDING & DOORS DO NOT HIRE PEOPLE BASED ON THEIR WORD ALONE, IN THESE TIMES IT IS NOT ENOUGH. DON'T AGREE TO PAY HOURLY NOR HALF UPFRONT...FOR PAINT ETC..LOL OR THEY MAY NEVER SHOW UP AGAIN. IF A COMPANY ASK HOW MANY EMPLOYESS WILL BE PAINTING THE HOUSE SO YOU CAN GET A MORE ACCURATE TIME FRAME TO COMPLETE JOB. NOW I NEED TO HIRE SOMEONE TO CLEAN UP A FRIEND OF A FRIEND'S MESS WORK WAS SUBPAR. ALWAYS ASK TO SEE LICENSE AS ALOT OF THOSE I INTERVIEWED CLAIMED ON THE PHONE TO HAVE JUST SO THEY COULD CHARGE MORE, & GAIN ACCESS . THEN THE SALEMAN SIDE COMES OUT. WHEN QUESTIONED FOR PROOF THEY THEN WANT TO NEGIOTATE PRICE. ASK IF RECALKING THE WINDOWS IS INCLUDED IN PRICE...
×