To maintain a wet edge, start near a corner and run the roller up and down the full height of the wall, moving over slightly with each stroke. Move backward where necessary to even out thick spots or runs. Don’t let the roller become nearly dry; reload it often so that it’s always at least half loaded. Keep the open side of the roller frame facing the area that’s already painted. That puts less pressure on the open side of the roller, so you’re less likely to leave paint ridges
I have a Home Improvement/Painting business, and Angie's List always advertises that that everyone is out to get them. Of course there are people who try to take advantage of homeowners My reputation and repeat business is based on word of mouth. Shoddy work is always a way to get put out of business quick. As far as strictly painting, preparation is a big factor in getting a quality paint job. If you don't prepare the surfaces you are painting you are spinning your wheels, and wasting money, no matter what paint you use. Getting a deposit from a customer is beneficial, but not always necessary. Sometimes it is a godsend, when you get stuck by the customer, which has happened to me more than once
In general, glossier paints are more stain-resistant and scrubbable. But a higher sheen also highlights any imperfections in the wall or in the paint job. "Flat paints are fine for ceilings and formal rooms, but for most of my customers, I recommend an eggshell gloss. It's good for hallways, kids' rooms, even kitchens and baths," says Toto. It seems that latex paints have won over even the most finicky painters. "Though we still use oil-based paints for restor-ation work, latex paints are fine for interior walls and new trim," says Toto, "as long as you don't go cheap on the paint." All of our pros have their personal favorites, but they agree that good paint does not come cheap. "You'll spend $20 to $35 per gallon for a top-shelf paint," says Weeks. The pros also agreed that using two coats of paint will result in the best-looking job. Don't skimp on the coverage; if you're covering more than 400 square feet per gallon, you're spreading it too thin. Also, keep 1/4 to 1/2 gallon on hand for touch-ups.
Recently I had the outside of my home painted. The contractor wrote a good contract, but I failed to realize that some things were not in it. It reminds me of the car dealer who offered a good price on a new car but failed to mention that it did not include tires. My contractor failed to specify that lattice under a porch was included. So the painters did not paint it. To his credit, he did instruct them to paint it when I brought it to his attention. If I had the job to do over again I would look for an individual who came with referrals from happy customers rather than a franchise owner..
I hired this person because he was listed on Angie's List. This man claimed he took and passed his contractor's license test after he signed me up for a project (Feb.) that included fixing cracks, painting, repairing a gate, installing a screen door, etc. He said he would charge me the original "handyman" prices. He postponed the start date, brought one worker who fixed a few cracks, repainted the gate terribly, but ruined a dining room ceiling when his worker used silicone in a tube instead of the expansion tape, spray ceiling covering, and paint I had purchased saying this silicone was "better". Then they said they would have to paint the whole ceiling and charge extra. They left holes in the walls and did a sloppy paint job in several places. I just paid them to get them out of my home as I felt intimidated as a senior citizen who is handicapped. I will try to have the main guy come back when I let him know what I need redone. Don't know if he will come back without charging me more.
No need to make special arrangements to check for lead based paint in most instances. Just determine that the paint contractor is a Certified Renovator under the EPA (or state: 10 states so far) Renovation, Repair, and Painting) program. A CR knows how to minimize and contain dust when disturbing lead paint when found. (The CR can also test.) It's usually simple to do so. RRP will add to the cost of the job. The increase is notable for a full exterior paint job if lead based paint found. On interior work, the extra costs are relatively small: a few percent usually. RRP is ONLY about dust from DISTURBING lead based paint.
The walls must be properly cleaned prior to applying primer or paint. This involves using a mixture of soap and water. Nail holes, chips, cracks or other small imperfections should be filled in and evened with plaster and allowed to dry before the entire surface is lightly sanded down and wiped again. Once the wall is clean and dry, you should apply painter’s tape over surfaces you do not want painted. Be sure not to overlook ceiling corners and edges, baseboards and trims and moldings.
Choose based on what's important in the room, whether it be masking dings in foyer walls, highlighting living room trim, or easy cleaning in a bathroom. How a paint will perform has to do with its sheen, or gloss. Flatter, low-luster paints contain minerals that roughen the surface, creating an even coat that hides flaws. Glossier paints have fewer minerals and form a smoother, more durable finish, but they show imperfections.
My happiness is looking at my beautiful old girl. Thank you to Warren for seeing the house's potential that first day and carrying through the plan. Thank you to Sean for fixing up the worn out spots and re-creating the beautiful bits that I hadn't realized the house had! Thank you to Dave and his crew for meticulously bringing life back to the old girl. Your warmth and passion for creating it just right is why my beloved house looks SO GREAT.
Homeowners painting their home, whether it's a new coat or a new house, should ask their contractor about low-emitting paints. As the paint is applied and dries, it can release high levels of VOC's, chemicals that may be toxic to the air your family breathes (not to mention, they stink!). On top of that, these off-gassing chemicals can be absorbed by soft materials already in your home (carpet, furniture, pillow, fabric) and act as a new source to continue releasing harmful chemicals (known as "the sink effect"). There are tons of third party certified low-emitting paints on the market now for more competitive pricing and selection. You can find them listed on my organization's website at greenguard.org (those that we certify) or you can find more info from your contractor :) Happy painting!
Pros take a "load and go" approach to painting. They load the bottom 1 1/2 inches of their brushes with paint, tap each side against the inside of their container to knock off the heavy drips, and then start painting. By contrast, homeowners often take a "load and dump" approach of dragging the loaded brush along the sides of their container and wiping off most of the paint. "It doesn't do you any good to dunk your brush in paint, then immediately wipe it all off," a 16-year veteran painter says.
I disagree with your criteria to hire a painter. A prompt returned call is nice but does not indicate the quality or fairness of the painter. As far as a written estimate, that should be more of a qualifier for the bid versus an evaluation criterion. I'm not sure one would have favorable results by hiring a painter on this basis. As far as the bidding process, change orders should ONLY be used if the customer requests additional scope (PMP 101). Angie's list should consider asking reviewers if/how much they were told to pay compared with the estimate. Unfortunately, there are a lot of contractors that are unethical and need to be accountable.
Most pros don't bother cleaning brushes and rollers if they are going to use them the next day on the same job. "Latex paint dries slowly in cold temperatures," says Maceyunas. For two-day jobs, he wraps the rollers and brushes in plastic grocery bags and sticks them in the refrigerator. "Just allow the roller to return to room temperature before reusing it," he says. Roller covers are almost impossible to clean thoroughly. Most pros buy new covers for each job.