Plastic drop cloths provide an inexpensive way to protect floors and furnishings from paint spatters, but you'd be much better off investing in canvas ones. Canvas is extremely durable and rip-resistant. It lays flat and presents much less of a tripping hazard. Canvas absorbs paint drips, unlike plastic drop cloths, which become slippery when spattered with paint. Canvas drop cloths can be easily folded around corners and doorways, something that's impossible to do with plastic sheeting. Plus, most plastic drop cloths must be tossed out after using. Canvas drop cloths will last a lifetime.
An easy way to calculate the square footage of a room, is to measure and add the total length of the all the walls, then multiplying that total by the height of the room. If there are big areas within that space that are not getting painted, it’s a good idea to deduct their square footage from the total. Examples are: a large window wall, double doors, or a wallpapered wall. If two coats are required, the measured square footage is doubled. In a 10 by 14 room the walls have a linear length of 48 feet. Multiplying 48 times 8 (the height of the walls) will give us 384 square feet of paintable wall.
Most pros don't bother cleaning brushes and rollers if they are going to use them the next day on the same job. "Latex paint dries slowly in cold temperatures," says Maceyunas. For two-day jobs, he wraps the rollers and brushes in plastic grocery bags and sticks them in the refrigerator. "Just allow the roller to return to room temperature before reusing it," he says. Roller covers are almost impossible to clean thoroughly. Most pros buy new covers for each job.
I would not recommend this company for the following reasons:1. Original appointment was very specific to them on what was needed and to take photos for 3 apartment unit plumbing fixture repairs. One unit had a bathroom tub/shower backup.2. No photos taken, 3 trips later and only 1 unit completed to satisfaction. (Backup) 3. Other faucets unable to find on line with their suppliers and repair 4. Had to find another plumbing company to complete the jobs. 5. Invoicing had to be redone as not in detail of job address for tax purposes 6. Bad communication throughout the project process with their internal customer service. Their technician and project manager ordering parts. 7. For the back up. Did not bring out correct snake on both trips and had to replace lines as too small to break through backup. Costing over $800 for 3 trips just to complete that situation out. 8. Ordered the wrong parts when 2nd trip out since no photos taken to confirm what was needed. Very dissatisfied and will never ask them to work in any of our rental properties again.