Lap marks are those ugly stripes caused by uneven layers of paint buildup. They occur when you roll over paint that’s already partly dry. (In warm, dry conditions, latex paint can begin to stiffen in less than a minute!) The key to avoiding lap marks is to maintain a “wet edge,” so each stroke of your roller overlaps the previous stroke before the paint can begin to dry.
The companies with the best paint products are Benjamin Moore, Dunn Edwards, Sherwin Williams, and Vista Paint. As a painter I don't recommend Berh from Home Depot as much because it's quality is just marketing. Flat paint has no sheen and it shows its true color, but is not easy to wash or clean. Satin, eggshell have low sheen and is washable. Semigloss ang glossy has a high sheen and these paints are recommended for bathrooms and kitchen or where there's high humidity and steam.
We could not believe that there was no smell at all when we came home after having the inside work completed and no mess! Luke touched up areas on his own on his return visit. Obviously showing he cared about providing the best quality finished product, which impressed us. He took the time to check the quality of the job and correct any issues without us mentioning it. Work was completed quicker than we expected for both the onsite and off site work. Also appreciated how accommodating the company was to booking appointments and working around our schedule.  Thanks for a great job!!

I am compelled to share my experience with Warline Painting. After frustrating attempts with another company, I found myself compromising quality for cost...this was clearly a mistake. I spent more of my time and money trying to fix things that should have been done right the first time. Not the case with Warline, not only were they professional, knowledgable and friendly but they did a fantastic job! The owner Warren Nyline, personally oversaw our job from beginning to end. This level of service created a feeling of trust, care and security for my family. The communication flowed perfectly between all of us...it felt like a team effort!  
I am a painting contractor and have been since 2001. Make sure the estimate provides in writing: What is EXCLUDED as well as INCLUDED. It should state the manufacturer and type of paint going to be used. Estimate says ALL LABOR AND MATERIALS. My estimates to my customers say "guaranteed coverage" eliminates the conversations of 1 coat vs 2 coat. I have my customers submit colors 5 days prior to start date. Customers need to inform me if they are going to use pure white, dark reds, oranges, and bright yellows they need to inform me in that 5 day window, so I can adjust my pricing for 3 coats. Although this more uncommon now than years past because a lot of paint manufacturers have primer with paint products. Let the contractor know if your doing accent walls. This takes longer to cut in straight lines and it requires the contractor to purchase more paint. If you add anything on the scope of work have the painter write out the description and cost prior to them doing the work. Have the estimate say how many days it will take to perform the work. Ask how many workers will be doing the job. Make sure to enforce that number of workers their everyday until the job is complete. Do not give final payment until you do a final walk through. Walk the job when its almost complete and point out areas that you want fixed prior to the contractors final walk through. Its best to do while the workers are still in that particular area as they will have tarps down and areas covered and it will be easier for them to take care of. Purchase a roll of blue tape and stick it to areas that you want fixed. This is called a punch list.

Interesting information! We just got scammed in White Stone, Virginia... we chose the same color, but went from a flat to an eggshell finish. I wasn't available to stand over the painter while he painted. For such a detailed job, I marveled at how quickly he finished the project! After he was paid for the job, we discovered all he did was roll paint across the walls and close to the crown, baseboards and detailed trim around windows and doors leaving about an inch or so of the flat finish. By using the same color, he didn't even do the job he was paid to do, which explained why he could finish the job so quickly. By using the same color... he got lucky and passed it off as a completed job not bothering to paint to and cut in around the trim. Upon further evaluation of our walls we could see exactly where he stopped because we could see the difference between the flat and eggshell finishes. There are walls he didn't even bother to paint. Then where he did paint near the crown when we were in the room watching ... he hit the crown moulding and tried to tell us it was already there... and tried to sell us on painting the crown moulding. I am so disgusted and upset!! He'll be hearing from us to rectify the situation.
I fully recommend this company; you will not be disappointed. They are perfectionists. I had requested quotes from four top rated firms to paint the interior of my year old townhouse. While all the prices were all fairly close, I chose Warline because of their payment terms (deposit not required); the work being done by their own employees; their ability to complete the job within a reasonable time frame (used four well experienced painters); and having a certified colour consultant to assist with colour choices.
We recently had the interior of our house painted and are extremely pleased with our entire experience working with Warline.  They truly care about their customers, the quality of their work and ensuring their customers are 100% satisfied. This was evident throughout the entire process. The final quote was exactly the same as the initial estimate and Warren came back once the job was completed to do a walk around and ensure we were happy. We will absolutely call Warline again for any future painting projects we have. I highly recommend them.
A successful paint job starts with properly preparing the surface you're going to paint. That means you must scrape, sand, patch, and fill every hole, crack, dent, and surface imperfection. This isn't the fun part of painting a room, but it is the most important part. No paint, regardless of its cost, color, thickness, or manufacturer's claims, will hide a pockmarked or cracked surface.
Most interior painting projects will present corners and edges. Corners, trims, splashes and accents will require cutting in — which generally requires the most patience, preparation and skill. There is a lot of debate among painters whether it is better to cut in before or after applying the roller. Solo painters may want to prepare the surfaces first, apply painter’s tape where required and cut in before applying paint to the rollers. Painters working in teams can split cutting in duties in sections while other team members are applying paint with rollers.
Professional painters have done this before. It’s how they make their living. Through experience, they have learned tricks of the trade and the techniques used to get quality results. They are familiar with the type of paint to use in each situation, know what quality paint is right for each task and know how to achieve a perfectly straight edge – with or without the use of painter’s tape.

Even an old lamp with a bare bulb held close to a wall will make minor cracks, bumps or nail pops jump out. Carmen Toto, owner of C. Toto & Sons in Madison, New Jersey, uses painter's putty or a lightweight spackle for minor cracks and dents; he uses plaster of Paris for dents deeper than 1/8 inch. Instead of the standard tape-and-spackle method for bridging over recurring stress cracks, Maceyunas uses a rubberized spray-on primer called Good-Bye Crack. Damaged wood requires a slightly different approach. "Don't use spackle on wood," says Toto, "because it just won't stick." For damaged trim, he uses painter's putty or a two-part wood filler, such as Minwax's High Performance Filler. Smooth any repairs, bumps, and nibs with a drywall pole sander. For smoother walls and better adhesion, some of our pros sand all previously painted walls regardless of the shape they're in.

As you walk through your lighted rooms (preferably day light) see if the new coat has light spots showing the precious paint. This is call "bleeding through". This means that there's only one coat of paint or the paint was diluted or the trasition of colors were from light to dark (or the other way around) and primer was not use or the painter is inexperienced.

I am a painting contractor and have been since 2001. Make sure the estimate provides in writing: What is EXCLUDED as well as INCLUDED. It should state the manufacturer and type of paint going to be used. Estimate says ALL LABOR AND MATERIALS. My estimates to my customers say "guaranteed coverage" eliminates the conversations of 1 coat vs 2 coat. I have my customers submit colors 5 days prior to start date. Customers need to inform me if they are going to use pure white, dark reds, oranges, and bright yellows they need to inform me in that 5 day window, so I can adjust my pricing for 3 coats. Although this more uncommon now than years past because a lot of paint manufacturers have primer with paint products. Let the contractor know if your doing accent walls. This takes longer to cut in straight lines and it requires the contractor to purchase more paint. If you add anything on the scope of work have the painter write out the description and cost prior to them doing the work. Have the estimate say how many days it will take to perform the work. Ask how many workers will be doing the job. Make sure to enforce that number of workers their everyday until the job is complete. Do not give final payment until you do a final walk through. Walk the job when its almost complete and point out areas that you want fixed prior to the contractors final walk through. Its best to do while the workers are still in that particular area as they will have tarps down and areas covered and it will be easier for them to take care of. Purchase a roll of blue tape and stick it to areas that you want fixed. This is called a punch list.


To pick the right color for your space, grab lots of paint chips, place them on the wall near the trim, and look at during different times of the day to see how light affect the color. When you’re ready to start testing shades, paint sample colors onto sheets of heavy paper instead of the wall so you can move them around and not make a mess of your walls. 
Perhaps you don’t know what you want to do, but you know you want a change. If so, you’ll love our color consultation, a free service that comes complimentary after you receive a free quote and sign a contract. A professional colorist will analyze your living space and make recommendations on what colors will work best for your home; you can then work with the colorist in choosing a final plan for your home interior.
DON"T EVER PAINT THE WALLS TO FRESHEN UP YOUR HOME & NEGLECT THE TRIM, MOULDING & DOORS DO NOT HIRE PEOPLE BASED ON THEIR WORD ALONE, IN THESE TIMES IT IS NOT ENOUGH. DON'T AGREE TO PAY HOURLY NOR HALF UPFRONT...FOR PAINT ETC..LOL OR THEY MAY NEVER SHOW UP AGAIN. IF A COMPANY ASK HOW MANY EMPLOYESS WILL BE PAINTING THE HOUSE SO YOU CAN GET A MORE ACCURATE TIME FRAME TO COMPLETE JOB. NOW I NEED TO HIRE SOMEONE TO CLEAN UP A FRIEND OF A FRIEND'S MESS WORK WAS SUBPAR. ALWAYS ASK TO SEE LICENSE AS ALOT OF THOSE I INTERVIEWED CLAIMED ON THE PHONE TO HAVE JUST SO THEY COULD CHARGE MORE, & GAIN ACCESS . THEN THE SALEMAN SIDE COMES OUT. WHEN QUESTIONED FOR PROOF THEY THEN WANT TO NEGIOTATE PRICE. ASK IF RECALKING THE WINDOWS IS INCLUDED IN PRICE...
×