"Cutting in is an acquired skill, but it's something you can't do at all with a ratty brush," says Doherty. When cutting in on a wall, he loads his brush and spreads out the excess paint, then works the brush up to the line between wall and ceiling. A brush stroke that's too wide creates a hatband, or smooth brushed band, on the very top of the wall where it meets the ceiling. To avoid this, Dixon recommends rolling first and then cutting in with a brush. "A good roller can get within 1/2 inch of the ceiling," he says. "You'll save time by not brushing more then you have to." When painting baseboards, "a wide taping knife makes a good paint guard," says Span. "Just keep the blade clean to prevent drips from working around the edge of the knife."
We don’t believe in handing our customer a roll of tape and asking them to check for deficiencies. That’s our job and we take it seriously. Our quality control is ongoing and done through every step of the project. Our interior painters are constantly checking their own work and our team leaders conduct a full inspection of the job when it’s completed. Our layers of quality control and inspections mean that when we are done, and you do a final walk through, the only thing you should be seeing is a beautiful paint job.
To industrial and institutional. I also own and operate a professional painting company of elite painters ONLY 5 ELITE PAINTERS, and pay them good money for being elite. Less is better in my opinion.The fact is this a homeowner and a painting company owner can both be taken advantage of by hustlers and liars and amateurs posing as pros. I have had many laborers tell me they can paint. " Oh yes sir I can paint, I'm a painter of 8 years. Yes sir I can cut a straight line." Some people will say and do anything to get a buck. If yoir on the job to see their rookie mistakes you may have time to save your reputation before disaster ensues and fire them on the spot. As a painting Company owner if your not on the job with your crew at least 3 out of 6 days every week your taking a huge risk of damaging your reputation and losing the respect of your team. Homeowners want to deal with you or the crew boss (jobs site supervisor) not "the painter". Many things I have read are right on. Painters for the most part will milk a clock for all they can and still do a good job. But amateurs will leave your projects in shambles and the only ones to pay for it is the contractor and the homeowners. But an elite painter and crew will try to complete a project as quickly as possible and move on to the next one. They understand bonuses, incentives, and promotions. My company provides the opportunity for a homeowner to meet each member of the crew and shake there hand on day one. There is also a differentiation between the crew boss and the crew by the uniforms they wear. Should the homeowners have any issue at all they know exactly who to go to to get results. This eliminates the age old problem of who screwed up? I have found that by me putting on my whites and giving my crew the opportunity to out do themselves on each project it ignites competition, pride in skill, and excellent commraderie amongst the team. We all hold each other accountable. Choose your contractor by the crew not the owner. The crew is a direct reflection of the Company owner. No room for rookies on fine finish painting. Go pro for painting and you won't regret it. With that being said homeowners should always remember that you get what you pay for. With paint and services. In most cases it will be well worth a few extra bucks to get elite results. Never go with the cheapest bid there is always a reason why it's so low.
Decorative painting adds depth, texture, and a liveliness to walls, yet even the most daring look-alike effects—tanned hides, draped fabric—can be easily achieved without any fancy tools or brushwork. Just sheathe a roller frame with one of these specialty covers for a professional-looking finish that you can do yourself using just paint or a combination of paint and glaze:
If you are unsure about what colors will work best in a space, you may wish to hire an interior decorator to help. Decorators can look at your furnishings, the size and shape of a room, and the amount of light it gets to help you determine the best shades for the space. Design services cost around $50 to $200 an hour, and can help you find the perfect colors for your home.
The pros were split on this tip. "Masking tape is problematic," says Mark Dixon, a painter in Missoula, Montana, and author of "House Painting Inside and Out" (Taunton Press, 1997). "Paint can bleed behind the tape, or remove the paint it's stuck to." Another problem is bridging. "Latex paints form a skin," says Dixon. "Removing painted tape can tear the skin, resulting in a ragged rather than a sharp line." Lastly, taping takes time. "Learning how to cut in with a brush takes practice, but if you can do it, you'll leave most tapers in the dust," Dixon says. (Cutting in is painting just the surface you want, not the surface adjacent to it — for example, where a wall meets the ceiling.) On the other hand, "If you can't cut in, you can't beat tape," says Span. The pros we spoke with all recommend painter's (blue) tape because it's easier to remove than masking tape. To prevent bleeding, Span uses a putty knife to bed the tape. After letting the paint dry, he scores the edge of the tape line with a utility knife to avoid tearing the paint.
I disagree with your criteria to hire a painter. A prompt returned call is nice but does not indicate the quality or fairness of the painter. As far as a written estimate, that should be more of a qualifier for the bid versus an evaluation criterion. I'm not sure one would have favorable results by hiring a painter on this basis. As far as the bidding process, change orders should ONLY be used if the customer requests additional scope (PMP 101). Angie's list should consider asking reviewers if/how much they were told to pay compared with the estimate. Unfortunately, there are a lot of contractors that are unethical and need to be accountable.
Paint colors can help define the character of your home, but choosing the right shades may seem overwhelming. To get started, collect paint chips from your local Home Depot store and try them out on your walls at home. After you've narrowed things down, get a paint sample mixed so you can test your colors on a larger scale. Your painter can also make recommendations and help you nail down the perfect colors.
"Pete and his crew did an excellent job for us, painting two large cabinets. They were on time, very professional, and very friendly (they are huge animal lovers and treated our cat superbly). They even touched up some other paint places that they were not hired to do, and answered any questions that we had about painting and other things related to the house. I definitely will hire them whenever I have any painting needs."
To get basic measurements, measure the length and width of each wall you want to paint in inches. Multiply the length and height together, and divide by 144. This will give you the square footage for each wall. A gallon of paint typically covers around 400 square feet. In some cases, you may need a primer 2 first, then a single coat of paint, meaning that you may need one gallon of primer and one gallon of paint to cover 400 square feet. However, if the wall requires multiple coats, this will increase the total amount of square footage required, and therefore the amount of paint.
Painting interior walls is a task better accomplished with foam rollers, because they are easy to use and can evenly cover large surface areas quickly. Foam rollers and brushes should never be overloaded with paint, as it can create drips, uneven coverage and can take longer to dry. It’s easy to get frustrated when the paint is fresh and does not look like a photo from the paint catalog, but remember: that’s something that usually happens after the second coat dries.