Freshly painted walls often look blotchy. The color is uniform, but the sheen isn’t consistent. This usually occurs over the holes and cracks you patched with a filler or drywall compound. The porous fillers absorb the paint, dulling the surface (a problem called “flashing”). When light hits these dull spots, they stick out like a sore thumb. The smooth patch also stands out in contrast to the slightly bumpy texture of the rest of the wall. A quick coat of primer is all it takes to eliminate ﬂashing and texture differences.
Plan the workforce. If you intend to not hire a professional crew, you'll need lots of help. There are many jobs to be done. First there's the furniture moving, then wall preparation, floor covering, materials gathering and prep, cleaning, and don't forget everyone will have to eat. It can easily take a team of five people a full ten days to paint a two-story (approx 2000 sq.ft.) home. Get as many people to help as you can. If some can only come one or two days, great. Maybe others can fill in. Ensure you plan with your workforce members in mind. They'll need plenty of time to arrange days away from work. Identify a few key personnel:
The cost of paint is about 15-25% of the cost of the contract. Mid grade paint costs about $40 per gallon with contractor pricing. If you are painting your home for real estate purposes and you don’t want to spend a lot of money, there is cheaper paint available. Stay away from anything that costs less than $25, you are buying watered down colour that is difficult to use. If you are thinking of using the most expensive paint available, you can spent over $120 per gallon from manufacturers like Farrow & Ball. Whatever you decide, keep in mind that since labour is your biggest expense, why not use the best paint your budget will allow.
House Interior Painting Design
I fully recommend this company; you will not be disappointed. They are perfectionists. I had requested quotes from four top rated firms to paint the interior of my year old townhouse. While all the prices were all fairly close, I chose Warline because of their payment terms (deposit not required); the work being done by their own employees; their ability to complete the job within a reasonable time frame (used four well experienced painters); and having a certified colour consultant to assist with colour choices.
Painting interior walls is a task better accomplished with foam rollers, because they are easy to use and can evenly cover large surface areas quickly. Foam rollers and brushes should never be overloaded with paint, as it can create drips, uneven coverage and can take longer to dry. It’s easy to get frustrated when the paint is fresh and does not look like a photo from the paint catalog, but remember: that’s something that usually happens after the second coat dries.
The problem with painting along the edge of textured ceilings is that it's almost impossible to get a straight line along the top of the wall without getting paint on the ceiling bumps. Pros have a simple solution. They run a screwdriver along the perimeter of the ceiling to scrape off the texture. "This lets you cut in without getting paint on the ceiling texture," one of our pros says. "The screwdriver creates a tiny ridge in the ceiling, so the tips of your paint bristles naturally go into it. And you'll never even notice the missing texture."
When your brush is loaded with paint, it's easy to create runs by applying too much paint in corners or along trim. To avoid that, start brushing about 1/2 inch away from the cut-in area to apply the paint. As the brush unloads, move over and slowly drag the brush along the trim or corner. Let the bristles gently push the paint against the cut-in area where the walls meet. You may have to do this a couple of times to get complete coverage, but it'll avoid excess paint along woodwork and in corners.
Back to the article. You can add water to all latex based paints / thinner to oil based paint. The tinting base has absolutely nothing to do with it. Say you are working outside and throughout the day you have to add a little water to keep the same consistency. If somebody really tried to add 20% to 50% water they no longer would be painting they'd be performing a whitewash or pickle finish.