Sanding not only feathers out chipped paint but also provides "tooth" for the next coat of paint. For glossy trim, use a sanding sponge rather than sandpaper. Sponges mold to the shape of the trim and last longer than paper. When applying latex over alkyd paint or when he is not sure of the original finish, Brian Doherty, a painter in Richmond, Virginia, follows the hand-sanding with liquid sandpaper to make sure the surface is completely deglossed to prevent incompatibility problems. "I've seen homes where latex was used on oil-painted trim, and the paint started to peel in less than a year," says Doherty.
Never, never hire "Hanks painting" , he is a scam. He charged me 1800 for an 800 sqft house, with the agreement of painting the gutters. He not only didn't paint the gutters, the paint of the walls and front door is pealing off. He did not sand the door and the wall color is washing off. His people don't know the work and he much less than them since he painted the door.
Homeowners painting their home, whether it's a new coat or a new house, should ask their contractor about low-emitting paints. As the paint is applied and dries, it can release high levels of VOC's, chemicals that may be toxic to the air your family breathes (not to mention, they stink!). On top of that, these off-gassing chemicals can be absorbed by soft materials already in your home (carpet, furniture, pillow, fabric) and act as a new source to continue releasing harmful chemicals (known as "the sink effect"). There are tons of third party certified low-emitting paints on the market now for more competitive pricing and selection. You can find them listed on my organization's website at greenguard.org (those that we certify) or you can find more info from your contractor :) Happy painting!
@Neil What is the use of repeating lessons when there is so much more to be learned? Technology has moved on from the adz. Plumbers use PEC, insulation is sprayed, glue-lams allow for open floor plans and furnaces are no longer stoked with coal. As for the new people, if these trades cannot attract fresh blood we will all be unable to get homes built and repairs made. I don't yearn for my first home with the leaky concrete block foundation, failing well pump and an oil furnace held up by the plenum. I'll take heat pumps, solar panels and PVC waste pipes any day.You can get all the sill plate repairs and flitch beams demos you need on YouTube.
I'm hiring an interior painter and that is why I was reading this comment list. I'm concerned about your comment about Angie's List. Some of us don't have personal recommendations for tradespersons, and rely on sites like this. Are you saying that Angie's List's reviews are not complete or that they do not print some of the negative reviews? It's hard to know what to do - I have not been able to find a person who just had their paint done so I can ask him/her about the quality of the painter.
Before the pros paint walls, they fill holes and patch cracks with joint compound. But if you paint directly over it, the compound will suck the moisture out of the paint, giving it a flat, dull look (a problem called "flashing"). Those spots will look noticeably different than the rest of the wall. To avoid that, pros prime the walls before painting.
I'm an architect and my firm routinely specifies interior finishes for projects so I thought I'd contribute a professional's perspective on the issue of how many coats of paint are deemed "acceptable". The fact of the matter is the average consumer usually isn't a paint expert and can't be expected to know about all the factors that impact coverage. That knowledge is considered "means and methods" and in a court of law, the responsibility lies with the painter or general contractor, not the consumer. What the consumer should be concerned about is the final result-does it look good and is it what you expected? The simplest way to communicate this to your painter is to stipule in your written agreement that the number of coats will be "as required to cover". That way all the guess work about what kind of primer, how many coats, how color affects the scope of work, etc., is removed from the consumer's responsibility and resides where it belongs-with the professional. In the contract that's why retention is always a good idea-typically 10% is withheld from payment until the job is completed to the satisfaction of the customer. Of course in return you as the customer have to be reasonable about what constitutes a completed job. Just my $.02.

Hi Patty, we are currently working on a manual for commercial bidding which we will provide once it’s completed. Most homeowners choose the middle bid believe it or not. Many companies think they have to be the lowest bid, but after setting up over 20,000 estimates, we’ve seen that the homeowner is often scared by the low bid, and thinks the high bid is too pricey. If your bid is in the middle and you present yourself professionally, you’ll have a much better chance of landing the job.


Brown denotes a personality that is earthy, realistic and trustworthy. This classic earth tone can be applied to living and work areas alike, as it evokes a feeling of being well-rounded and connected with nature. Terracotta and dark mustard brown combinations are perfect for Latin American and Santa Fe-style décor. Brown hues are great for interior spaces that get a lot of sunlight. Lighter shades of brown, such as beige and taupe, are neutral colors that particularly work well in homes that are being shown to potential buyers.
Back to the article. You can add water to all latex based paints / thinner to oil based paint. The tinting base has absolutely nothing to do with it. Say you are working outside and throughout the day you have to add a little water to keep the same consistency. If somebody really tried to add 20% to 50% water they no longer would be painting they'd be performing a whitewash or pickle finish.
Thanks, all, for your time & efforts adding to the article & comments, especially Dave urging requesting both General Liability AND Worker Compensation insurance certificates to protect from real & fraudulent liability--from my experience especially in California, where insurance fraud is a popular income thief, even causing car collisions to collect.

Most painting companies, including our own, do not price our work on an hourly basis. We can work this way and do on complicated projects. But to give you a good idea of what the hourly rates tend to be, these range from $45-60 a man/hr. Then you have to factor in the cost of materials. This tends to range from 10-20% of the cost of the job depending on the level of quality.
Primers aren't just diluted paint. They're formulated to establish a solid, even base, seal stains and ensure that the topcoats of paint go on smoothly and bond securely to the surface. "Most homeowners use latex primers, but the pros stick to alcohol and alkyd primers because they'll cover almost anything," says John Weeks, of John the Painter in Mobile, Alabama. Primer can affect the appearance of the topcoat. "It's okay to spot-prime the ceilings but not the walls, because primed spots will show," adds Span.
Roger! I am so sad to hear of your retirement, but also so grateful for all the episodes you have done. I hope your health comes back to you in full force--and soon--so you can enjoy a fantastic retirement surrounded by friends and family. Your viewers will miss you greatly, but your legacy lives on in all the blooming flowers and budding gardens you've inspired over the years (including in my very own yard). I hope you'll visit the show often; we'll be looking out for you!!Sincerely,FGJ
Sand the trim with a fine-grit sanding sponge. Sponges get into crevices where sandpaper can’t go and let you apply even pressure. Then apply the first coat of paint, let it dry at least 24 hours, lightly sand it again for a completely smooth surface, and apply the second coat. After each sanding, vacuum the trim, then wipe it down with a tack cloth to remove the dust.

With that said, here's the reality of that particular scenario. Painters do put water in the paint, but not for reasons you would think. Some materials need to have their viscosity manipulated in order to slow drying time, allowing gravity to 'smooth' out the product for a better finish. It also prevents 'drags' and 'sausages'. I personally try not to do it too often, but from time to time I have to. I want my client to have a proper finish.


Wow, I learned so much.  Now I know why I got the cost quote I got to do the job right.  Being a cook I get it... because you can't just make a meatloaf... you can't just paint a room.  You better know what you are doing and the cost of a GREAT job is like the right cut of meat.  So, you can look at th finished product and smile & enjoy... great job !!
To maintain a wet edge, start near a corner and run the roller up and down the full height of the wall, moving over slightly with each stroke. Move backward where necessary to even out thick spots or runs. Don’t let the roller become nearly dry; reload it often so that it’s always at least half loaded. Keep the open side of the roller frame facing the area that’s already painted. That puts less pressure on the open side of the roller, so you’re less likely to leave paint ridges

Recently I had my kitchen cabinets painted with Warline. The workmanship is incredible. They were always on time, very considerate and managed all the details of my project with great care. During the entire process Heidi made me feel as though I were her only client and always made me feel at ease. I can't recommend Warline enough, and will be calling them every time I need painting.  
Hello, I have a sad situation to share -- a friend of mine who is a very good painter, experienced too, fell off a tall ladder that did not have "boots" on it. (I've never seen those.) Anyway, do you think he should have asked for boots before painting? Possibly it was a situation where he was shy to ask because he wanted the job... (I don't know all the details.)
Either you have the skill to paint your house, or you don't. Most South Jersey homeowners know what they can and can't do. They don't seem to consider the preparations nearly as much as the painting itself. I agree that great painting results rely on prep work. It can be tough to do these things by yourself. There are plenty of things to consider when hiring painters. repairsandpaints /hiring-painters/
Freshly painted walls often look blotchy. The color is uniform, but the sheen isn’t consistent. This usually occurs over the holes and cracks you patched with a filler or drywall compound. The porous fillers absorb the paint, dulling the surface (a problem called “flashing”). When light hits these dull spots, they stick out like a sore thumb. The smooth patch also stands out in contrast to the slightly bumpy texture of the rest of the wall. A quick coat of primer is all it takes to eliminate flashing and texture differences.
Do you want painting so beautiful you’ll be itching to show it off? Then choose ProTect Painters! Our team is highly qualified and experienced, and we focus on the customer experience with industry leading standards of service and care. Since our company was founded in 1995, the name Protect Painters been synonymous with good communication, security, quality, respect, and jobs well done. You can rely on us.
Keep an eye on the new cans as they're being brought in. Make sure they look new and don't have paint in the rim of the can. If it's a five-gallon bucket, check to see whether the lid is still sealed on with the plastic strip. The only time it's acceptable to mix water in the paint is when you're using a deep or ultra deep base paint to reduce its stickiness, which is rare with new paint technology. Dark primary colors are composed almost entirely of tint that makes it very hard to work with without adding water.
For first timers, as well as seasoned DIY’ers, picking out paint can be both exciting and daunting. So many options exist from choosing the perfect shade of grey for your in-home office, all the way to the which relaxing hue you’ll be using for your family room. Picking out colors and finishes that compliment each other could consume entire days in the paint aisle before you even consider picking up a brush.

I would not recommend this company for the following reasons:1. Original appointment was very specific to them on what was needed and to take photos for 3 apartment unit plumbing fixture repairs. One unit had a bathroom tub/shower backup.2. No photos taken, 3 trips later and only 1 unit completed to satisfaction. (Backup) 3. Other faucets unable to find on line with their suppliers and repair 4. Had to find another plumbing company to complete the jobs. 5. Invoicing had to be redone as not in detail of job address for tax purposes 6. Bad communication throughout the project process with their internal customer service. Their technician and project manager ordering parts. 7. For the back up. Did not bring out correct snake on both trips and had to replace lines as too small to break through backup. Costing over $800 for 3 trips just to complete that situation out. 8. Ordered the wrong parts when 2nd trip out since no photos taken to confirm what was needed. Very dissatisfied and will never ask them to work in any of our rental properties again.
Carole, you raise an excellent point that should be included in this list. Any contractor coming on to your property should provide you with a Certificate of Insurance from his agent showing evidence of Commercial General Liability and Workers Comp. Without these protections in place, an attorney for a contractor's worker or a 3rd party injured in the course of the work on your property will name YOU in a lawsuit. It's a minor inconvenience up front to ask for this documentation compared to the cost of litigation when something goes wrong.
Professional paint crews know what they’re doing. Odds are, they’ve been in the business a while & can crank out a fully prepped room in just a matter of hours. Trim, however, is one of the most time-consuming portions of a room repaint (aside from prep). If you have a lot of trim/detail pieces in a room, keep in mind that this can affect how much it costs to paint.
I've seen this done many years ago by a guy who did all sorts of jobs where I lived. My dad caught him painting his boss's roof and he was watering down the paint. We've had a hard time trying to get a painter for our house. We've had a guy that had been remmended by a neighbor and he hasn't showed up to paint for 2 weeks. I want to call him and my husband says no. I'm 69 years old and I'm about ready to go and paint our 2 porches, I've painted all my life and all the inside of our home. Maybe that's the way it should be with everyone that can paint pretty good.
I've seen this done many years ago by a guy who did all sorts of jobs where I lived. My dad caught him painting his boss's roof and he was watering down the paint. We've had a hard time trying to get a painter for our house. We've had a guy that had been remmended by a neighbor and he hasn't showed up to paint for 2 weeks. I want to call him and my husband says no. I'm 69 years old and I'm about ready to go and paint our 2 porches, I've painted all my life and all the inside of our home. Maybe that's the way it should be with everyone that can paint pretty good.
Use a roller to paint the rest of the wall. A good method to use is the 'W method'. You start by painting a large 3 foot (0.91 m) square W on the wall. Then, without lifting the roller, you fill in the W. You can paint a wall section-by-section, and do the walls one at a time for best results. It's generally a good idea to use an extension pole for your roller instead of standing on a ladder. Make sure that neither the extension pole nor the roller has plastic handles, as plastic handles are flexible and this makes it difficult to control the painting.
Priming is compulsory if you're painting over a darker color, or on a new drywall, but it's a good idea to include this step before any paint job. A primer is necessary because it blocks any stains from bleeding through. It is also important because it prevents any blisters and paint-peeling by improving paint adhesion. Lastly, primer is a good idea as it allows complete single-coat coverage of the walls. If you want a better appearance, you can tint your primer with the final color you intend on using on the walls. Most paints today come with inbuilt primers, but an old school primer is still a better option. Before you start painting, remember to use painter's tape to cover your door frames, window sills, and any switches on the wall.
Your small home is the perfect spot for a sunny little kitchen. A warm yellow like Benjamin Moore's Hawthorne Yellow would look great with white cabinets, subway tile walls, and a weathered gray tile floor. The secret to choosing the right yellow paint color for your small kitchen is to sample light yellow colors first, then increase the intensity if you don't get the look you want right away.
My experience with Warline Painting and the results they delivered have earned them a very positive review. From the detailed quote I received from Warren to the colour consultation from Heidi (which actually saved me money by changing my mind on the need to change my flooring) right through the professional performance of Matthew and his crew, I felt I received excellent service and value for money spent. When the job was completed, a thorough follow up was done to ensure my satisfaction with the job, and I was left very happy with the entire experience.
Ideally, you want as much paint on the brush as you can control without making drips or blobs. To do this, Doherty dips his brush about 1 1/2 inches into the paint, then taps (not wipes) each side of the brush against the side of the can. Tapping knocks off the drips and forces the paint into the bristles. "The brush releases the paint just like a fountain pen," he says. Weeks agrees, saying, "Just be sure to keep your brush moving, or it'll start to drip." For more delicate work, such as when you're painting trim or window sash, you'll want less paint on the brush. Doherty again dips and taps his brush, but this time he also scrapes the sides against his can. "The outside bristles are drier and easier to manage," he says, "but there's still plenty of paint on the brush."
We could not believe that there was no smell at all when we came home after having the inside work completed and no mess! Luke touched up areas on his own on his return visit. Obviously showing he cared about providing the best quality finished product, which impressed us. He took the time to check the quality of the job and correct any issues without us mentioning it. Work was completed quicker than we expected for both the onsite and off site work. Also appreciated how accommodating the company was to booking appointments and working around our schedule.  Thanks for a great job!!

Farrow & Ball has a small paint color palette, but their colors are so rich and beautiful that you're bound to find the perfect one for your small home. Farrow & Ball's Pavilion Gray is a rich greige that works well for a dining room that's decorated in either a contemporary or traditional style. Pair this gorgeous wall color with a modern crystal chandelier for a stylish juxtaposition in a traditional dining room.
To get basic measurements, measure the length and width of each wall you want to paint in inches. Multiply the length and height together, and divide by 144. This will give you the square footage for each wall. A gallon of paint typically covers around 400 square feet. In some cases, you may need a primer 2 first, then a single coat of paint, meaning that you may need one gallon of primer and one gallon of paint to cover 400 square feet. However, if the wall requires multiple coats, this will increase the total amount of square footage required, and therefore the amount of paint.
We don’t believe in handing our customer a roll of tape and asking them to check for deficiencies. That’s our job and we take it seriously. Our quality control is ongoing and done through every step of the project. Our interior painters are constantly checking their own work and our team leaders conduct a full inspection of the job when it’s completed. Our layers of quality control and inspections mean that when we are done, and you do a final walk through, the only thing you should be seeing is a beautiful paint job.
Some proposals simply say to paint the walls and ceiling and never specify the number of coats to be applied. If the colors are similar enough, it's possible to get away with one coat of paint and not discount your pricing. No matter how hard you try, tiny, pin-sized air holes will pop exposing the original walls. This may not bother you if you can't notice it, but principally speaking you should have paid your painter less for the work.
×