Hiring a local painter to tackle your interior painting project is the easiest way to get the job done quickly, neatly, and with the best possible results. A painting contractor will provide the right materials for the job and complete any necessary repair and prep work to ensure a beautiful and lasting finish. Whether you're painting the inside of your house to update a single room or to finish off a big remodel, an experienced painting pro will deliver excellent results in record time.
The best time to tackle windows is in the beginning of the day, when you're fresh," says Doherty. "But it still takes me an hour to do a standard window." For double-hungs, begin by raising the inner sash and lowering the outer sash until their positions are almost reversed. Paint the lower half of the outer sash first, then the entire inner sash. Once the lower sash is dry, return both to their normal position, but leave them slightly open. Finish painting the outer sash. "Windows take too long to tape," says Doherty. When painting, overlap the glass by 1/16 inch to seal the wood.
We contracted with Warline to repaint the exterior of our townhouse complex. This was a complex job with multiple elevations and a demanding client (42 owners to please). Our conclusion was that the job could not have gone better. Warren Nyline and his employees were extremely attentive to detail and ensured that all surfaces were thoroughly cleaned, repaired where necessary and beautifully painted. There were very few deficiencies and those identified were addressed immediately.
If you're done painting for the day but still have more to do tomorrow, you don't have to go through the laborious process of cleaning your paintbrushes and paint-roller sleeves. Instead, simply brush or roll off the excess paint, then tightly wrap them in plastic food wrap. If necessary, double up the plastic to seal out any air, then place the wrapped brushes and roller sleeves in the refrigerator to keep them fresh. This might sound crazy, but it works—it'll keep the paint from drying overnight and rendering your equipment unusable.
When we meet with you, we’ll talk about your expectations. We’ll discuss your budget, your needs, your time frame and walk you through our process of what to expect when you hire Warline. We follow that up with a detailed, written estimate that outlines the exact scope of work, the products we’ll use and exactly how much it will cost. We know its likely you are going to be getting another estimate. With ours, you are able to clearly compare what we do against the other estimates and see what makes Warline better.

To solidify this response, we have been in business for over 30 years as a painting contractor. We didn't just paint a couple of houses 25 or 30 years ago, we paint approximately 900-1000 painting jobs per year and operate with 40 professional painters doing commercial, residential and industrial painting. This article on behalf of Angie's List is totally asinine! I was under the impression Angie's List was only carrying "legitimate" contractors with established reputations. This article written is primarily referring to bottom feeding, one man band operations, trying to hustle for a paycheck.


I've seen this done many years ago by a guy who did all sorts of jobs where I lived. My dad caught him painting his boss's roof and he was watering down the paint. We've had a hard time trying to get a painter for our house. We've had a guy that had been remmended by a neighbor and he hasn't showed up to paint for 2 weeks. I want to call him and my husband says no. I'm 69 years old and I'm about ready to go and paint our 2 porches, I've painted all my life and all the inside of our home. Maybe that's the way it should be with everyone that can paint pretty good.

There are two common types of paint that are available for interior projects: smooth and durable oil-based paints and lower-VOC latex paint. Latex paints are used in most residential settings as they dry faster and are easier to clean up. Oil-based paints are harder, making them a good option for trims, floors and furnishings. In addition, there are 5 basic finish options that identify the sheen and hardness of paint. Matte finishes have the least sheen. They are great for hiding imperfections in walls and ceilings, but are the hardest to clean. Eggshell and satin finishes provide more reflection and a smoother surface for easier cleaning, while semi and high-gloss paints provide the highest amount of sheen and durability.
Great experience! Tyler came to do estimate and was informative professional and competitive with quote.. Luke was the painter. He was punctual, polite, and thorough. he was quiet and worked efficiently. his work was fantastic. I was concerned about a few steam damaged areas and he worked his magic. The cabinet doors were taken away for a few days then returned looking like brand new doors, can't say enough about this well run company with competitive pricing!!!
Painting kitchen cabinets provides the customer great value. Refinishing them can be about 30% of replacement. The majority of cabinets that we paint are made of  varnished wood and need a good quality bonding primer. Before we apply the primer the cabinets get washed and degreased as necessary. Depending on the customer’s situation, the doors and drawers can be removed or they can be painted in place. Professionals prefer to remove them, along with the knobs, hinges and all hardware. If possible the doors are transported to a shop where they get spray painted under a controlled environment. They are brought back to be reinstalled after the paint is cured. We recommend two finish coats of cabinet grade enamel paint.
Modern Masters 1 gal. Champagne Metallic Interior Paint Modern Masters 1 gal. Champagne Metallic Interior Paint can be used to create a high-end decorative finish in a variety of circumstances. Use it on a small accent piece or large architectural specification. Durable and long lasting for commercial application yet easy enough for do-it-yourself projects. Special formula contains real ...  More + Product Details Close
Wonder how much Festool is paying Silva to showcase their outrageously expensive line of tools. He used practically the entire product line on this project that was nothing more than a Festool commercial. I guess the brad nailer company didn't offer any kickbacks to the crew because you never saw their brand name. This show has turned into nothing more than crass commercialism. And when did Silva become a 'master carpenter'. He can't hold a candle to Abrams. Never could. But he's definitely better at milking the sponsors. Would love to see the inside of his workshop.

Our hypothetical, 2 storey 2,000 square foot home is 5 years old and located in the suburbs. The home is lightly furnished and the basement requires no painting. The scope of work includes two coats on the walls of 3 bedrooms, the bathroom & powder room, the stairway and hallways. The main floor has an open space kitchen & a living-dining room with an adjoining family room. The laundry room needs to be painted.
You have to start with a perfectly smooth surface to end up with perfectly painted walls or woodwork. One pro tells PM that Sander would be a more fitting job title than Painter since he spends so much time pushing sandpaper. Sanding levels outs spackle or joint-compound patches and flattens ridges around nail holes. Sanding also removes burrs and rough spots in your trim.
The walls must be properly cleaned prior to applying primer or paint. This involves using a mixture of soap and water. Nail holes, chips, cracks or other small imperfections should be filled in and evened with plaster and allowed to dry before the entire surface is lightly sanded down and wiped again. Once the wall is clean and dry, you should apply painter’s tape over surfaces you do not want painted. Be sure not to overlook ceiling corners and edges, baseboards and trims and moldings.
Before the pros paint walls, they fill holes and patch cracks with joint compound. But if you paint directly over it, the compound will suck the moisture out of the paint, giving it a flat, dull look (a problem called "flashing"). Those spots will look noticeably different than the rest of the wall. To avoid that, pros prime the walls before painting.

Our interior house painters have years of experience painting houses and apartments of all shapes and sizes. Tell us about your painting project and select your paint color. Then you can get your free and instant online quote. Once you book online, a team of residential painters can be at your home in as little as 48 hours. Plus, we’ll bring the paint!


Choose based on what's important in the room, whether it be masking dings in foyer walls, highlighting living room trim, or easy cleaning in a bathroom. How a paint will perform has to do with its sheen, or gloss. Flatter, low-luster paints contain minerals that roughen the surface, creating an even coat that hides flaws. Glossier paints have fewer minerals and form a smoother, more durable finish, but they show imperfections.
Painting the doors and the door frames is not always part of the main paint job. There are two main reasons for that. Doors are painted in more durable semi-gloss or satin paint which last longer and is washable. The other reason is cost savings. Painting trim such as doors and door frames is time consuming and relatively more expensive than walls. There are three basic types of painted doors.
A successful paint job starts with properly preparing the surface you're going to paint. That means you must scrape, sand, patch, and fill every hole, crack, dent, and surface imperfection. This isn't the fun part of painting a room, but it is the most important part. No paint, regardless of its cost, color, thickness, or manufacturer's claims, will hide a pockmarked or cracked surface.
Most painting companies, including our own, do not price our work on an hourly basis. We can work this way and do on complicated projects. But to give you a good idea of what the hourly rates tend to be, these range from $45-60 a man/hr. Then you have to factor in the cost of materials. This tends to range from 10-20% of the cost of the job depending on the level of quality.
@Neil What is the use of repeating lessons when there is so much more to be learned? Technology has moved on from the adz. Plumbers use PEC, insulation is sprayed, glue-lams allow for open floor plans and furnaces are no longer stoked with coal. As for the new people, if these trades cannot attract fresh blood we will all be unable to get homes built and repairs made. I don't yearn for my first home with the leaky concrete block foundation, failing well pump and an oil furnace held up by the plenum. I'll take heat pumps, solar panels and PVC waste pipes any day.You can get all the sill plate repairs and flitch beams demos you need on YouTube.
I managed commercial construction projects for many years, have built and remodeled several properties, and never once have I encountered any of these scams. The tone of this article is deeply troubling. The author seems to be saying that ALL painting contractors are inherently dishonest, and that has not been my experience. The underlying advice here is sound: get it all in writing and cover as many contingencies as possible--so pointing out potential pitfalls like coat coverage is helpful. But do that in the spirit of clear communication of expectations, not with the expectation that the person you are hiring will try to cheat you at every turn. Not every contractor takes outrageous advantage of change orders; not every contractor will sneak past necessary preparation and/or repairs. Contractors of all sorts get a bad rap as it is; reinforcing a stereotype with articles written from this point of view just seems unproductive.

Filling gaps with a paintable acrylic-latex caulk cuts down on drafts and makes your trim look better than new. The secret to using caulk is to cut the tip smaller than you think it should be; too much caulk makes a mess. Also, instead of using a nail to break the inner seal, use a small wire so you don't stretch out the nozzle. Also consider buying a dripless caulk gun, which will automatically back off the pressure after each pull on the trigger to prevent unwanted oozing.


Thanks, all, for your time & efforts adding to the article & comments, especially Dave urging requesting both General Liability AND Worker Compensation insurance certificates to protect from real & fraudulent liability--from my experience especially in California, where insurance fraud is a popular income thief, even causing car collisions to collect.

Your best assurance that a paint is formulated without nasties is a logo from independent testers Green Seal, GreenGuard, or Scientific Certification Systems. They bar more than 1,000 unsafe compounds, including VOCs such as benzene, heavy metals such as cadmium, and plasticizers like phthalates. Green Wise, another tester, bars 26 such chemicals. Can't find logos on products at the paint store? Visit Green Seal, GREENGUARD, Scientific Certification Systems, or GREEN WISE for approved paints.


Choose based on what's important in the room, whether it be masking dings in foyer walls, highlighting living room trim, or easy cleaning in a bathroom. How a paint will perform has to do with its sheen, or gloss. Flatter, low-luster paints contain minerals that roughen the surface, creating an even coat that hides flaws. Glossier paints have fewer minerals and form a smoother, more durable finish, but they show imperfections.
Before speaking to a pro, consider how many rooms you would like to paint. Ask yourself if your project will be limited to the walls of the rooms or if ceilings and trim need to be refreshed as well. Since standard equipment is used to prep a work site and apply most finishes, it's usually more economical for you to have multiple rooms painted at once.
×