"Dean is everything you want for a great job. He actually went to home depot twice during the replacement of a sink, range, and oven. Everything including turning the water off at the street, making sure the job was done safe and leaving the kitchen clean and operational after the install and removal of the old appliances. I highly recommend him + he's a smart and courteous veteran!"
An easy way to calculate the square footage of a room, is to measure and add the total length of the all the walls, then multiplying that total by the height of the room. If there are big areas within that space that are not getting painted, it’s a good idea to deduct their square footage from the total. Examples are: a large window wall, double doors, or a wallpapered wall. If two coats are required, the measured square footage is doubled. In a 10 by 14 room the walls have a linear length of 48 feet. Multiplying 48 times 8 (the height of the walls) will give us 384 square feet of paintable wall.
I had originally budgeted a lower amount for this project....painting had always been a DIY project in this home, so I didn't have a clue. Now that I'm older and less nimble, I decided to hire it out. Waldner's Handyman Services was very professional and worked with me to understand how costs were factored into my painting project. I am very satisfied with the finished result and will use them again for future jobs.
"Pete and his crew did an excellent job for us, painting two large cabinets. They were on time, very professional, and very friendly (they are huge animal lovers and treated our cat superbly). They even touched up some other paint places that they were not hired to do, and answered any questions that we had about painting and other things related to the house. I definitely will hire them whenever I have any painting needs."
To paint a large section without leaving lap marks, roll the nearly dry roller in different directions along the dry edge, feathering out the paint as you go. After completing the entire length of the wall or ceiling, move to the next section and paint over the feathered edges. For the second coat, apply the paint in the opposite direction. This crisscrossing paint application sharply reduces (if not eliminates) lap marks.
To pick the right color for your space, grab lots of paint chips, place them on the wall near the trim, and look at during different times of the day to see how light affect the color. When you’re ready to start testing shades, paint sample colors onto sheets of heavy paper instead of the wall so you can move them around and not make a mess of your walls.
We are a custom home builder and use Warline Painting. At Kingdom Builders we measure our projects success based on quality, schedule, budget and to never disappoint a client. For us to be successful we evaluate and track the performance of our subtrades to ensure our expectations are achieved. Warline Painting is they type of company we like to work with. Not only can they meet our expectations but they do it with ease. They take pride in their work from start to finish. They stand out because they are very efficient, monitor their own quality, offer colour consultation services and are cable of custom staining & gold leafing, which they did on our most recent project. We recommend Warline Painting!
The pros were split on this tip. "Masking tape is problematic," says Mark Dixon, a painter in Missoula, Montana, and author of "House Painting Inside and Out" (Taunton Press, 1997). "Paint can bleed behind the tape, or remove the paint it's stuck to." Another problem is bridging. "Latex paints form a skin," says Dixon. "Removing painted tape can tear the skin, resulting in a ragged rather than a sharp line." Lastly, taping takes time. "Learning how to cut in with a brush takes practice, but if you can do it, you'll leave most tapers in the dust," Dixon says. (Cutting in is painting just the surface you want, not the surface adjacent to it — for example, where a wall meets the ceiling.) On the other hand, "If you can't cut in, you can't beat tape," says Span. The pros we spoke with all recommend painter's (blue) tape because it's easier to remove than masking tape. To prevent bleeding, Span uses a putty knife to bed the tape. After letting the paint dry, he scores the edge of the tape line with a utility knife to avoid tearing the paint.
This was very helpful. I wonder if i would really follow through and check to see if my painter was cheating me. I used a painter I found on Angie's List. This was 5 years ago. He did a great job. I know he did patching only for about a day and a half. We decided on the kind of paint before he started. that is what he used. I don't know if I could stay on top of him and watch him open every can of paint.
The cost of paint is about 15-25% of the cost of the contract. Mid grade paint costs about $40 per gallon with contractor pricing. If you are painting your home for real estate purposes and you don’t want to spend a lot of money, there is cheaper paint available. Stay away from anything that costs less than $25, you are buying watered down colour that is difficult to use. If you are thinking of using the most expensive paint available, you can spent over $120 per gallon from manufacturers like Farrow & Ball. Whatever you decide, keep in mind that since labour is your biggest expense, why not use the best paint your budget will allow.