We just had our entire house painted by Warline Painting and couldn't be happier with the job they did. Heidi was wonderful in helping us pick colours that worked well with our decor and our ideas. Warren and his crew were clean, professional and a pleasure to have around. The extensive prep work that was done on our house and their attention to detail really shows in the final product. I have already recommended Warline Painting to friends and family and will be having them come back to our home in the Spring to paint the exterior.
Most painters have no problem painting doors in place, but they recommend you lay the door on sawhorses and work horizontally. If you have a paneled door, start with the panels and work from the outside edges in toward the center. "Watch the corners — paint loves to puddle," warns Dixon. While the paint is still wet, lightly "tip off" the panel with an almost dry brush. (Tipping off is pulling the brush over the surface to level out the finish.) When painting the stiles (vertical) and rails (horizontal) just follow the grain of the wood. When the grain changes abruptly, for instance, where the rail meets the stile, don't stop your brush stroke — you'll only leave a lump of paint. Apply paint across the joint with a full stroke, and then tip off the overlapping section by pulling the brush in the direction of the grain. "Make sure the door is dry before painting the opposite side or rehanging it," says Maceyunas.
Interior house painting costs are calculated on a few key factors. Nationally, interior house painting projects range from $200 to $2,500. The wide price range indicates how much square footage, paint selection and labor can affect cost. One pro uses a laser to measure each room, subtracting the size of the doors and windows, and then bases the quote on the square footage of the actual surfaces to be painted. Painters may provide you with savings if you opt to paint your entire home rather than just having one room or an accent wall painted. For example, the average house painting cost for an 8x12 room with 8-foot ceilings is roughly $200, when contractor-grade paint is used. Painting ceilings, baseboards and frames can also affect cost. Pros may charge per linear foot to smooth and paint baseboards. In one area pros might charge 50 cents per linear foot to paint baseboards, while pros in another part of the country could charge $1.50 per linear foot for the same task. Painters may charge flat rates for painting door and window frames, with one charging $20-$25 and another $60 per door. Geography and regional costs to do business play a major role in the cost of interior painting. The same painter in a rural region has less to pay in taxes, transportation, insurance and overhead than they would in a major city like New York.
I am a painting contractor and have been since 2001. Make sure the estimate provides in writing: What is EXCLUDED as well as INCLUDED. It should state the manufacturer and type of paint going to be used. Estimate says ALL LABOR AND MATERIALS. My estimates to my customers say "guaranteed coverage" eliminates the conversations of 1 coat vs 2 coat. I have my customers submit colors 5 days prior to start date. Customers need to inform me if they are going to use pure white, dark reds, oranges, and bright yellows they need to inform me in that 5 day window, so I can adjust my pricing for 3 coats. Although this more uncommon now than years past because a lot of paint manufacturers have primer with paint products. Let the contractor know if your doing accent walls. This takes longer to cut in straight lines and it requires the contractor to purchase more paint. If you add anything on the scope of work have the painter write out the description and cost prior to them doing the work. Have the estimate say how many days it will take to perform the work. Ask how many workers will be doing the job. Make sure to enforce that number of workers their everyday until the job is complete. Do not give final payment until you do a final walk through. Walk the job when its almost complete and point out areas that you want fixed prior to the contractors final walk through. Its best to do while the workers are still in that particular area as they will have tarps down and areas covered and it will be easier for them to take care of. Purchase a roll of blue tape and stick it to areas that you want fixed. This is called a punch list.
It pays to be proactive regarding home improvement projects. If you can tackle multiple tasks at once, you end up saving both time & money in the long run. So, before you call the job done, make it a point to inspect your baseboards & molding to see if its time for them to be replaced. Doing this before you tackle the paint on the wall will save you headaches later on & will only add to the facelift you’ve given your home interior.
An easy way to calculate the square footage of a room, is to measure and add the total length of the all the walls, then multiplying that total by the height of the room. If there are big areas within that space that are not getting painted, it’s a good idea to deduct their square footage from the total. Examples are: a large window wall, double doors, or a wallpapered wall. If two coats are required, the measured square footage is doubled. In a 10 by 14 room the walls have a linear length of 48 feet. Multiplying 48 times 8 (the height of the walls) will give us 384 square feet of paintable wall.
Gray is a timeless color, but it could also be considered drab if not accessorized with bold colors. Anyone who has grown tired of looking at white paint on walls for years should consider gray tones. Gray paint is cooler than its white counterpart and more versatile, as it manages to blend well with most decorations. It is an ideal color for all interior spaces and provides the perfect backdrop for color bursts.
Warline did an outstanding job painting the exterior of our heritage home (which was well overdue for a paint job). The amount of preparatory work done was above and beyond what I expected. Their craftmanship in painting is second to none. Heidi's colour advise was invaluable. My house looks stunning It is evident that their crew loves what they do and take pride in their work. One member of the team brought his grandfather by our house to show him what he was working on.
The national average cost for an interior painter ranges between $450 and $900. Interior painters can tackle everything from complete color makeovers in each of your rooms to touching up an accent wall to painting pieces of furniture. The square footage and complexity of the project, along with the materials needed, are the main factors that will affect cost. Other factors include whether you supply the paint yourself or want the painter to do so, whether you move the furniture and do the prep work or ask them to do it, and whether any repair work is needed on the walls. Painting the ceiling and the trim will also have an effect on cost. The type of paint you choose can also raise or lower your house painting cost. A gallon of paint may range from $20 to over $100, depending on quality and brand. Ask your painter if they charge per hour or per square foot, and how much you can save by doing prep work (moving furniture, etc.) yourself.
Did you even read the article? It was specifying UNSCRUPULOUS painters! And, by the way, the photo at the top was not identified at all. How would anyone know whether it was done by a homeowner or not? Also did you ever stop to think that if a consumer has the knowlege to spot a dishonest contractor then by default he also has the knowlege to identify an honest one as well? And, pardon me, but just because you've never seen something has absolutely nothing to do with whether it has actually happened to someone else. Why would any honest business person be so defensive about the publishing of such useful information? If any painters/painting contractors object to a consumer having this kind of information maybe they are the dishonest ones!
Hello my name is Jason. I am a seasoned Construction Worker with 2 college degrees under my belt. One in Electrical Engineering and another in Culinary Arts. I possess an array of skills derived from my higher education, my experience in the Construction Industry and also from Data Networking. I am a master at problem solving and researching so rest assured I know how to get the job DONE!!!!!!
"Cutting in is an acquired skill, but it's something you can't do at all with a ratty brush," says Doherty. When cutting in on a wall, he loads his brush and spreads out the excess paint, then works the brush up to the line between wall and ceiling. A brush stroke that's too wide creates a hatband, or smooth brushed band, on the very top of the wall where it meets the ceiling. To avoid this, Dixon recommends rolling first and then cutting in with a brush. "A good roller can get within 1/2 inch of the ceiling," he says. "You'll save time by not brushing more then you have to." When painting baseboards, "a wide taping knife makes a good paint guard," says Span. "Just keep the blade clean to prevent drips from working around the edge of the knife."
A good paintbrush is key to a professional-looking finish. "A quality brush costs $15 to $25, but you'll discover that pros aren't as talented as you thought," says Doherty. "The equipment has a lot to do with their success." Most of our pros prefer natural-bristle brushes for oil-based paints, but they recommend synthetics for all-around use. When choosing a brush, pay attention to the bristles. Synthetic brushes are made of nylon or polyester, or a combination of the two. Poly bristles are stiffer, which makes them good for exterior or textured work, but for fine interior work, Doherty uses softer nylon brushes. Look also for tapered bristles, which can help you work to an edge, and flagged tips, which help spread the finish smoothly and evenly. Brushes are available in 1- to 4-inch widths. Most painters keep an arsenal on hand to match the job. "Use common sense," says Maceyunas. "A smaller brush gives you more control, but no one wants to paint a door with a 1-inch-wide brush." Doherty recommends starting with a 2- or 2-1/2-inch sash brush. The angled brush makes it easier to cut to a line and puts more bristles on the work than a square-tipped brush.