Sand the trim with a fine-grit sanding sponge. Sponges get into crevices where sandpaper can’t go and let you apply even pressure. Then apply the first coat of paint, let it dry at least 24 hours, lightly sand it again for a completely smooth surface, and apply the second coat. After each sanding, vacuum the trim, then wipe it down with a tack cloth to remove the dust.
I found Warline Paint to be honest & very professtional from start to finish. The crew arrived on time, was friendly and cleaned up afterwards. They did an excellent job of prepping and paintiing. The walls look so smooth now. I am very pleased with the results. If you want top quality work done I would highly recommend them. Thank you to Warren and his hard working crew.
Back to the article. You can add water to all latex based paints / thinner to oil based paint. The tinting base has absolutely nothing to do with it. Say you are working outside and throughout the day you have to add a little water to keep the same consistency. If somebody really tried to add 20% to 50% water they no longer would be painting they'd be performing a whitewash or pickle finish.
If you plan to hire a professional painter (plus crew), you should expect to shell out a few hundred dollars for the average 10×12 room. Depending on your area, this could exclude the price of certain materials. So for a four bedroom house, getting each bedroom painted + the cost of larger common areas (if you’re going for a full repaint) can really add up.
I fully recommend this company; you will not be disappointed. They are perfectionists. I had requested quotes from four top rated firms to paint the interior of my year old townhouse. While all the prices were all fairly close, I chose Warline because of their payment terms (deposit not required); the work being done by their own employees; their ability to complete the job within a reasonable time frame (used four well experienced painters); and having a certified colour consultant to assist with colour choices.
Prime. Dark colors, stains (once sealed), and previously unpainted surfaces (drywall, spackle, etc.) will need a primer coat, usually white. NOTE: most paint stores & home improvement centers will now tint primer (at no charge) to match fairly close to the color of the finished coat, that way two coats of primer need not be applied. Although not all surfaces need a prime coat, skip this step at your peril! Dark colors will likely show through the first -- or even the first couple-- topcoats of paint. Sealants and unpainted surfaces like spackle patches will absorb or repel moisture in a topcoat at a different level than the areas surrounding them. Applying a good primer coat will help even out these differences. Primer equalizes a wall to a uniform surface. It's like erasing a canvas before drawing a new picture. Although some will argue the point, you generally don't need to spend a great deal on primer or buy special primer. A cheap, 5 gallon (18.9 L) bucket of plain, flat white paint will usually do the trick and cover a large area. Give your primer at least 24 hours to dry (follow its instructions) before applying a topcoat.

So sad that Angie's List requires the contractor be notified!! They have lost me as a client. If I'm dissatisfied and want to give an "F" rating (question/workers...I SHOULD NOT be intimidated into passing up an opportunity to explain my experience! There is NO WAY my contractor got an Aplus rating from over five hundred people....so someone was lying....yet I can't report that without the contractor knowing it? REALLY?


I do not mean to come off with an edge, however, this is an article for people hiring low bid, uninsured, one man band painters out to "hustle" a buck. Hire reputable, established companies or hire someone you know or have a strong referral from. If you are arguing over watered down paint, ticky, tacky deposits, buying your own supplies, you have hired the wrong guy.

I've seen this article sent out 4 times now. It's out dated in terms of today's "Scams." Paint stores haven't charged more money for deeper paint colors in over 15 years. Also Water downed paint? Seriously? That would never happen in the real world. And Wall repair? what painter would ever not assume wall repair as included? This article is a waste of time and should be taken down or edited to reflect actual scams of todays times.


Lastly, chose a sheen to match the needs of the space. Flat finishes hide imperfections well and absorb light which can make the paint look darker. Eggshells and satins are tough enough to be used in family rooms, kids' rooms, and hallways but don’t hide surface imperfection well. Semi-Gloss and high-gloss finishes are primarily used for trim because they accentuate woodwork details and clean up easily.
This was very helpful. I wonder if i would really follow through and check to see if my painter was cheating me. I used a painter I found on Angie's List. This was 5 years ago. He did a great job. I know he did patching only for about a day and a half. We decided on the kind of paint before he started. that is what he used. I don't know if I could stay on top of him and watch him open every can of paint.
Before speaking to a pro, consider how many rooms you would like to paint. Ask yourself if your project will be limited to the walls of the rooms or if ceilings and trim need to be refreshed as well. Since standard equipment is used to prep a work site and apply most finishes, it's usually more economical for you to have multiple rooms painted at once.

This was very helpful. I wonder if i would really follow through and check to see if my painter was cheating me. I used a painter I found on Angie's List. This was 5 years ago. He did a great job. I know he did patching only for about a day and a half. We decided on the kind of paint before he started. that is what he used. I don't know if I could stay on top of him and watch him open every can of paint.
Yellow is generally a happy color that increases confidence. Similar to gray, yellow can be very versatile. Pale yellows used in sunlit rooms with flowery decorations are very inviting, especially in the morning time. Darker yellows can add warmth to a room even in the winter time. Bright yellows help reduce the amount of illumination needed in a space and are ideal for any room in the house.

So why not just paint your own home. I'm not a painter, so my wife and I take our time, buying the paint and supplies, and doing our own painting. Yes, we need to tape, and it's not perfect, but we get the satisfaction of seeing our completed work. Get the supplies, sliders for your furniture, and patience and go for it. That way YOU have control over the entire project.


The cost to paint an average size room (10X12) ranges from $380-$790, not including ceilings, trim or cost of the paint. DIY, this can cost between $200-$300. When estimating the cost, painters will start with how much paint will be required to complete the job. To know this, they first need to know the size of the area to be covered. The easiest way to calculate the size of the paintable area is to add together the length of the wall and multiply it by the width of the room from floor to ceiling. The resulting amount is the room's square footage. This total is a starting point, as it is not all paintable surface. The painters won't paint the windows and doors, for example, and they must account for ceiling trim and baseboards as well. The next step is to subtract the area of the doors and windows -- along with the square footage of the trim and baseboards -- to get an average. Then, use the same calculation (length x width) on the windows, doors, trim and baseboards, and subtract all of those numbers. The result of this equation is the square footage of the room's walls. This is your surface area number. (Painters will typically add a little square footage back in to this amount to account for extra paint, which may be required.)
×