Heidi's colour consultation was amazing. She worked with me to choose the right tones and when I found a carpet that had more blues than the greens we had started with, she helped me pick a whole new set of colours taking the carpet as the guide. Without her guidance and giant colour samples, I know I would have ended up with very strong and overpowering colours. Instead we have soft relaxing blue shades throughout the house, and everyone who comes in alway comments on how light and breezy the house is. Exactly what I was looking for!

Perhaps you don’t know what you want to do, but you know you want a change. If so, you’ll love our color consultation, a free service that comes complimentary after you receive a free quote and sign a contract. A professional colorist will analyze your living space and make recommendations on what colors will work best for your home; you can then work with the colorist in choosing a final plan for your home interior.
I am a painting contractor and have been since 2001. Make sure the estimate provides in writing: What is EXCLUDED as well as INCLUDED. It should state the manufacturer and type of paint going to be used. Estimate says ALL LABOR AND MATERIALS. My estimates to my customers say "guaranteed coverage" eliminates the conversations of 1 coat vs 2 coat. I have my customers submit colors 5 days prior to start date. Customers need to inform me if they are going to use pure white, dark reds, oranges, and bright yellows they need to inform me in that 5 day window, so I can adjust my pricing for 3 coats. Although this more uncommon now than years past because a lot of paint manufacturers have primer with paint products. Let the contractor know if your doing accent walls. This takes longer to cut in straight lines and it requires the contractor to purchase more paint. If you add anything on the scope of work have the painter write out the description and cost prior to them doing the work. Have the estimate say how many days it will take to perform the work. Ask how many workers will be doing the job. Make sure to enforce that number of workers their everyday until the job is complete. Do not give final payment until you do a final walk through. Walk the job when its almost complete and point out areas that you want fixed prior to the contractors final walk through. Its best to do while the workers are still in that particular area as they will have tarps down and areas covered and it will be easier for them to take care of. Purchase a roll of blue tape and stick it to areas that you want fixed. This is called a punch list.
"Jose was amazing! I had asked for just a quote on a texturing job, and he was over within the hour. Not only did he give me a great quote, but he was able to fit the work in for me that day. He did such a great job mudding and texturing (and really fast for how perfect it came out), that I asked if he could paint the same room and the exterior of my garage as well. He happily agreed and finished all of this in one afternoon! All of my neighbors were impressed. He even went to work on another job while the texture was drying to maximize time. Such a hard worker. He is the man. I definitely kept his number handy for my next project & won't hesitate to call him again. I'd recommend him to anyone."
"I couldn't be more pleased with this painter! He was extremely curtious, listenened to what I wanted and threw in his suggestions when I needed them. The entire house looks wonderful, I'm so gratful for the way it all turned out. I had many, MANY quotes, not only was his the lowest, but he also guaranteed his work and made sure we were happy with it all. Great company, great guy, great paint job. I couldn't be more pleased!! 😊"
The best time to tackle windows is in the beginning of the day, when you're fresh," says Doherty. "But it still takes me an hour to do a standard window." For double-hungs, begin by raising the inner sash and lowering the outer sash until their positions are almost reversed. Paint the lower half of the outer sash first, then the entire inner sash. Once the lower sash is dry, return both to their normal position, but leave them slightly open. Finish painting the outer sash. "Windows take too long to tape," says Doherty. When painting, overlap the glass by 1/16 inch to seal the wood.
Back to the article. You can add water to all latex based paints / thinner to oil based paint. The tinting base has absolutely nothing to do with it. Say you are working outside and throughout the day you have to add a little water to keep the same consistency. If somebody really tried to add 20% to 50% water they no longer would be painting they'd be performing a whitewash or pickle finish.
Do you want painting so beautiful you’ll be itching to show it off? Then choose ProTect Painters! Our team is highly qualified and experienced, and we focus on the customer experience with industry leading standards of service and care. Since our company was founded in 1995, the name Protect Painters been synonymous with good communication, security, quality, respect, and jobs well done. You can rely on us.
The national average cost for an interior painter ranges between $450 and $900. Interior painters can tackle everything from complete color makeovers in each of your rooms to touching up an accent wall to painting pieces of furniture. The square footage and complexity of the project, along with the materials needed, are the main factors that will affect cost. Other factors include whether you supply the paint yourself or want the painter to do so, whether you move the furniture and do the prep work or ask them to do it, and whether any repair work is needed on the walls. Painting the ceiling and the trim will also have an effect on cost. The type of paint you choose can also raise or lower your house painting cost. A gallon of paint may range from $20 to over $100, depending on quality and brand. Ask your painter if they charge per hour or per square foot, and how much you can save by doing prep work (moving furniture, etc.) yourself.
As an owners rep and former estimator for a gc i do expect to pay a reasonable deposit say 10 percent and then weekly progress payments. I am asking the painter to book his time and to do the work on my schedule. Most painting companies are not huge operations they will pay their staff weekly. For most repaints i ask for one tinted primer coat and one finish coat for 100 percent coverage. New work gets one tinted primer and two finish coats for 100 percent coverage. The cost of the paint is not really that different for colors or finish. Brands like european fine paint and C2 are more expensive than Ben Moore and sometimes more difficult to roll based on their consistency. Some home depot brands are as expensive as the Ben Moore and of equal quality others aren't. Red paints are notorious for number of coats required and special priming requirements.

"Modern paints dry too quickly, and are difficult to brush out," says Dixon, who uses paint additives, such as Floetrol for latex paints and Penetrol for alkyds. "Adding a few ounces per gallon slows drying time and makes the paint more workable," he says. Another problem is bridging. "Latex paints form a skin," says Dixon. "Removing painted tape can tear the skin, resulting in a ragged rather than a sharp line." Lastly, taping takes time. "Learning how to cut in with a brush takes practice, but if you can do it, you'll leave most tapers in the dust," Dixon says. (Cutting in is painting just the surface you want, not the surface adjacent to it — for example, where a wall meets the ceiling.) Although there are mildewcide additives, our pros prefer using bathroom and kitchen paints that have built-in mildew fighters. "These paints will prevent mildew from forming, but they won't kill mildew that's already there," Dixon points out. Because leftover mold spores can live beneath the paint and eventually work their way through to the surface, you should also prep bath and kitchen surfaces. First, wash down the walls with a bleach solution (3/4 cup of bleach per gallon of water) then seal with a stain-blocking primer, such as Zinsser's Bulls Eye 1-2-3 or Kilz's Total One.
Attic Fan Installation Bathroom Fan Repair Ceiling Fan Installation Ceiling Fan Repair Electric Wall Heater Installation Electrical Panel Installation Electrical Panel Repair Electrical Panel Upgrade Electrical Wiring Installation Electrical Wiring Upgrade Exhaust Fan Installation Holiday Lighting Installation LED Interior Light Conversion Light Fixture Installation Light Fixture Repair Light Fixture Replacement Light Switch Installation Outlet Installation Outlet Repair Spa Wiring Installation
Paint preparation is the foundation for the entire job — if done correctly your paint will perform to its fullest potential. If done incorrectly, the best paint will crack, peel, or chip easily. Make any necessary repairs before you start your painting project. Dirty walls should be cleaned, especially near the stove and sink. Greasy deposits and soap scum can interfere with paint's adhesion.
I found Warline Paint to be honest & very professtional from start to finish. The crew arrived on time, was friendly and cleaned up afterwards. They did an excellent job of prepping and paintiing. The walls look so smooth now. I am very pleased with the results. If you want top quality work done I would highly recommend them. Thank you to Warren and his hard working crew.
Homeowners painting their home, whether it's a new coat or a new house, should ask their contractor about low-emitting paints. As the paint is applied and dries, it can release high levels of VOC's, chemicals that may be toxic to the air your family breathes (not to mention, they stink!). On top of that, these off-gassing chemicals can be absorbed by soft materials already in your home (carpet, furniture, pillow, fabric) and act as a new source to continue releasing harmful chemicals (known as "the sink effect"). There are tons of third party certified low-emitting paints on the market now for more competitive pricing and selection. You can find them listed on my organization's website at greenguard.org (those that we certify) or you can find more info from your contractor :) Happy painting!
I was taught to paint by a professional and when estimating the amount of paint needed, I always allow for a second coat just to make sure of coverage. We interviewed a painter who tried to tell me I bought poor quality paint without knowing where I purchased it, and stated he would have to buy all new paint. He had not seen the cans and was just guessing so I asked him where I should buy paint from now on. It was the same place I had purchased my paint and he wanted to charge me an extra 20 a gallon more than what I paid for. Needless to say, I have interviewed numerous painters and they are not all honest.

The perfect roller would hold a roomful of paint, leave the right amount of texture, wouldn't spray or fuzz, and would be easy to clean. Until somebody invents the ideal one, follow these tips to choose the right roller. "The longer the nap, the more paint the roller will hold, but it will also create more texture." says Dixon. "A 1/2-inch nap lamb's-wool roller holds plenty of paint without too much texture," says Dixon. "Less expensive rollers can work," says Span. "Just wash them first in dishwashing liquid to remove any stray fibers." Most of the pros we spoke with prefer 9-inch rollers over 18-inch models -- they are lighter, cheaper, and easier to use. Despite these shortcomings, Maceyunas swears by the wider roller. "The roller can do a whole wall in a few up and down strokes instead of in several dozen W and M strokes," he says.
If your home was built before 1978, there is a good chance that lead paint was used in its construction. Scraping, sanding, or removing old paint can release toxic lead dust which can cause serious illness in children and pregnant women. Special handling is required when working with lead-based paints. If lead paint is present in your home, you will need to hire a lead-certified painting contractor or lead abatement contractor. Before getting started with your interior painting project, consult your local building authority or visit www.epa.gov for more information.
Yes, it does. Green paints are safer because their makers have reduced or eliminated the toxic VOCs that can harm us and the air we breathe. And they've done it without compromising quality or jacking up prices. Green paints are as good or better than the old-school variety, and most cost the same as a midrange or premium latex. The problem is, some green paints are more people- and eco-friendly than others. Here are the key questions to ask when shopping for green paint:
When hiring a contractor it is always best to hire one who is personally referred to you by someone you trust. Hiring through ads or phone book is hit and miss. Check with your local paints stores, they know the good guys from the bottom feeders. Go to the stores that sell the high quality paints like Benjamin Moore(nonpareil), Pittsburg, Sherwin Williams or Glidden. Don't go the the big box stores for referrals, the people there don't know squat!
We recently had the interior of our house painted and are extremely pleased with our entire experience working with Warline.  They truly care about their customers, the quality of their work and ensuring their customers are 100% satisfied. This was evident throughout the entire process. The final quote was exactly the same as the initial estimate and Warren came back once the job was completed to do a walk around and ensure we were happy. We will absolutely call Warline again for any future painting projects we have. I highly recommend them.
Most painters have no problem painting doors in place, but they recommend you lay the door on sawhorses and work horizontally. If you have a paneled door, start with the panels and work from the outside edges in toward the center. "Watch the corners — paint loves to puddle," warns Dixon. While the paint is still wet, lightly "tip off" the panel with an almost dry brush. (Tipping off is pulling the brush over the surface to level out the finish.) When painting the stiles (vertical) and rails (horizontal) just follow the grain of the wood. When the grain changes abruptly, for instance, where the rail meets the stile, don't stop your brush stroke — you'll only leave a lump of paint. Apply paint across the joint with a full stroke, and then tip off the overlapping section by pulling the brush in the direction of the grain. "Make sure the door is dry before painting the opposite side or rehanging it," says Maceyunas.
I was a painting contractor for many years and never asked for a deposit upfront. A good contractor should have great credit with his suppliers and an even better contract if the deal should go south before the job is done. Get to know your customer and explain how each paint covers so they understand fully before you have to apply 3 or 4 coats. If you didn't bid your job right and the client has already signed the contract then that is on you not the client. Yes I haven had to eat the difference but the client was happy and a return customer for years so I made up for it.

Here is where this affects you as a consumer. You select a painter with a contract that says 2 coats, $500 down. You give the company the deposit and pick your colors a couple of days before the project starts. The painter goes to the store with your colors and figures out they are deep base. He (or she) not only needs to charge you more for the paint, but he also needs to charge you for a dark gray primer coat. Ninety nine percent of the time that primer coat is going to be really, really expensive since you already gave a deposit.
Just like with roller paint application, painters are not limited to using just one stroke when cutting in. It is important, however, to work towards the edge of the corners applying even pressure. If time permits, painters should allow their cut in work to dry completely before applying paint with rollers, keeping in mind that light touchups on corners and edges will always be required at the end.
Buying a can of premium paint, then bait and switch over to low-line products? Again, complete nonsense. Think about it for a moment; the Painter needs 5 gallons of wall finish. So, he buys one can of premium and the rest 'cheap'? How is he going to hide the 4 other gallons? What's he going to hide it in??? He only has ONE gallon of premium. It's not as though he's going to keep older can labels, they would be covered in paint of a different colour.
I was searching for months for a company to paint our town home. This was a particularly sensitive subject for us since our town home was only a year old, but the paint job was beyond awful! I met with the owners Warren & Heidi and immediately I knew they were the right choice. If you are looking for high quality, perfection, amazing service, trust and a company who serves their customers needs first, Warline is definitely the only option. As a business professional myself, I would never attach my recommendation to any company that didn't meet my extremely high standards and Warline did just that!

Your best assurance that a paint is formulated without nasties is a logo from independent testers Green Seal, GreenGuard, or Scientific Certification Systems. They bar more than 1,000 unsafe compounds, including VOCs such as benzene, heavy metals such as cadmium, and plasticizers like phthalates. Green Wise, another tester, bars 26 such chemicals. Can't find logos on products at the paint store? Visit Green Seal, GREENGUARD, Scientific Certification Systems, or GREEN WISE for approved paints.
Hello, I have a sad situation to share -- a friend of mine who is a very good painter, experienced too, fell off a tall ladder that did not have "boots" on it. (I've never seen those.) Anyway, do you think he should have asked for boots before painting? Possibly it was a situation where he was shy to ask because he wanted the job... (I don't know all the details.)
When you move from room to room, consider your color story, or how the colors will interact. Using complementary colors - colors that sit opposite one another on the color wheel, will create a very dramatic look in your home. Choosing analogous colors, which sit beside one another on the color wheel, creates a more subtle appearance. Monochromatic looks can also be very effective in small spaces, when you choose varying shades of one color to give variety, but without definition.

Sanding not only feathers out chipped paint but also provides "tooth" for the next coat of paint. For glossy trim, use a sanding sponge rather than sandpaper. Sponges mold to the shape of the trim and last longer than paper. When applying latex over alkyd paint or when he is not sure of the original finish, Brian Doherty, a painter in Richmond, Virginia, follows the hand-sanding with liquid sandpaper to make sure the surface is completely deglossed to prevent incompatibility problems. "I've seen homes where latex was used on oil-painted trim, and the paint started to peel in less than a year," says Doherty.
Over the past year I have had several jobs given to 2 Angie's list recommendations and 1 not from a recommendation. They all have one thing in common, lack of sufficient and correct preparation to save time, labor, and the fact that they put a person in charge that was a cut corners type of worker. The two from Angie's list sent worker/s back to try touch up problems, but once the job is not prepared correctly in the first place any extra work is like putting a band-aid on a dirty wound.

To get basic measurements, measure the length and width of each wall you want to paint in inches. Multiply the length and height together, and divide by 144. This will give you the square footage for each wall. A gallon of paint typically covers around 400 square feet. In some cases, you may need a primer 2 first, then a single coat of paint, meaning that you may need one gallon of primer and one gallon of paint to cover 400 square feet. However, if the wall requires multiple coats, this will increase the total amount of square footage required, and therefore the amount of paint.

House Interior Painting Design Co

×