"Modern paints dry too quickly, and are difficult to brush out," says Dixon, who uses paint additives, such as Floetrol for latex paints and Penetrol for alkyds. "Adding a few ounces per gallon slows drying time and makes the paint more workable," he says. Another problem is bridging. "Latex paints form a skin," says Dixon. "Removing painted tape can tear the skin, resulting in a ragged rather than a sharp line." Lastly, taping takes time. "Learning how to cut in with a brush takes practice, but if you can do it, you'll leave most tapers in the dust," Dixon says. (Cutting in is painting just the surface you want, not the surface adjacent to it — for example, where a wall meets the ceiling.) Although there are mildewcide additives, our pros prefer using bathroom and kitchen paints that have built-in mildew fighters. "These paints will prevent mildew from forming, but they won't kill mildew that's already there," Dixon points out. Because leftover mold spores can live beneath the paint and eventually work their way through to the surface, you should also prep bath and kitchen surfaces. First, wash down the walls with a bleach solution (3/4 cup of bleach per gallon of water) then seal with a stain-blocking primer, such as Zinsser's Bulls Eye 1-2-3 or Kilz's Total One.
We contracted with Warline to repaint the exterior of our townhouse complex. This was a complex job with multiple elevations and a demanding client (42 owners to please). Our conclusion was that the job could not have gone better. Warren Nyline and his employees were extremely attentive to detail and ensured that all surfaces were thoroughly cleaned, repaired where necessary and beautifully painted. There were very few deficiencies and those identified were addressed immediately.
Add a stunning splash of color to your Add a stunning splash of color to your home's interior accents with BEHR Premium Plus Ultra Interior Semi-Gloss Enamel. This radiant sheen will help you create a sleek reflective look that brings maximum impact to trim windows and doors as well as indoor furniture and cabinets. Get the beautiful color ... More + Product Details Close
Third: The contractor buys the materials. We get them at a better rate and customers really don't know what they are getting into by being a material racer. Once again, I'm not referring to the guys that paint a bedroom or 2 a week. Tell the homeowner to go grab 50 gallons of paint, $300.00 worth of sundries and related job cost items and I'd be interested to see how it works for them....IT WILL NOT. And if were talking about people getting taken advantage of here, the paint suppliers with no relationship to a homeowner will 100% GOUGE the customer and completely take advantage of them with pricing. Contractors will pay nearly half the price and will still save the customers money marking up paint 10-15%.
Keep an eye on the new cans as they're being brought in. Make sure they look new and don't have paint in the rim of the can. If it's a five-gallon bucket, check to see whether the lid is still sealed on with the plastic strip. The only time it's acceptable to mix water in the paint is when you're using a deep or ultra deep base paint to reduce its stickiness, which is rare with new paint technology. Dark primary colors are composed almost entirely of tint that makes it very hard to work with without adding water.
The cost of paint is about 15-25% of the cost of the contract. Mid grade paint costs about $40 per gallon with contractor pricing. If you are painting your home for real estate purposes and you don’t want to spend a lot of money, there is cheaper paint available. Stay away from anything that costs less than $25, you are buying watered down colour that is difficult to use. If you are thinking of using the most expensive paint available, you can spent over $120 per gallon from manufacturers like Farrow & Ball. Whatever you decide, keep in mind that since labour is your biggest expense, why not use the best paint your budget will allow.