We don’t believe in handing our customer a roll of tape and asking them to check for deficiencies. That’s our job and we take it seriously. Our quality control is ongoing and done through every step of the project. Our interior painters are constantly checking their own work and our team leaders conduct a full inspection of the job when it’s completed. Our layers of quality control and inspections mean that when we are done, and you do a final walk through, the only thing you should be seeing is a beautiful paint job.
The cost to paint an average size room (10X12) ranges from $380-$790, not including ceilings, trim or cost of the paint. DIY, this can cost between $200-$300. When estimating the cost, painters will start with how much paint will be required to complete the job. To know this, they first need to know the size of the area to be covered. The easiest way to calculate the size of the paintable area is to add together the length of the wall and multiply it by the width of the room from floor to ceiling. The resulting amount is the room's square footage. This total is a starting point, as it is not all paintable surface. The painters won't paint the windows and doors, for example, and they must account for ceiling trim and baseboards as well. The next step is to subtract the area of the doors and windows -- along with the square footage of the trim and baseboards -- to get an average. Then, use the same calculation (length x width) on the windows, doors, trim and baseboards, and subtract all of those numbers. The result of this equation is the square footage of the room's walls. This is your surface area number. (Painters will typically add a little square footage back in to this amount to account for extra paint, which may be required.)
Painting interior walls is a task better accomplished with foam rollers, because they are easy to use and can evenly cover large surface areas quickly. Foam rollers and brushes should never be overloaded with paint, as it can create drips, uneven coverage and can take longer to dry. It’s easy to get frustrated when the paint is fresh and does not look like a photo from the paint catalog, but remember: that’s something that usually happens after the second coat dries.
No need to make special arrangements to check for lead based paint in most instances. Just determine that the paint contractor is a Certified Renovator under the EPA (or state: 10 states so far) Renovation, Repair, and Painting) program. A CR knows how to minimize and contain dust when disturbing lead paint when found. (The CR can also test.) It's usually simple to do so. RRP will add to the cost of the job. The increase is notable for a full exterior paint job if lead based paint found. On interior work, the extra costs are relatively small: a few percent usually. RRP is ONLY about dust from DISTURBING lead based paint.
My husband has been a professional painter over 30 years. He prides himself in his high level of work ethic and customer satisfaction. He stays up to date on techniques and finishes. He gives Very detail and accurate appraisals with contracts. At an alarming rate, as he starts to finish the last day or the day before, the client starts nit picking and being disrespectful towards his work when every day prior to that, they were very pleased, as he request ongoing satisfaction throughout the job. Then they don't to want pay remaining balance, bicker about final cost, or stop payment. He has a crew he has to pay whether the customer does or doesn't honor the contract as well as our own household expenses. Wasted time ,labor, money and effort lost. Now how do we fix this? Remind yourself and clients that a contract is based on honor.

You may think you're home safe with a low- or zero-VOC paint, but once it's tinted with the universal colorants used in most paint stores, it could be anything but. On average, these colorants add about 150 grams of VOCs to a gallon; darker shades have more. To get around this, either settle for colors that are factory-mixed or look for paints with no-VOC tinting systems, such as Mythic, Freshaire Choice, or Yolo Colorhouse.
You are right on with this - why do people leave switch plates on when it's just so easy to take them off? Another thing that happened to us - we had the popcorn ceiling taken off and the ceiling painted white. When the job was done and I later went to change out all the fixtures/fans, they had left every fixture in place, so there was a large patch of popcorn and unpainted ceiling left behind - it just didn't dawn on me to specify that they take those down before scraping and painting. It was kind of a mess.

Hiring a local painter to tackle your interior painting project is the easiest way to get the job done quickly, neatly, and with the best possible results. A painting contractor will provide the right materials for the job and complete any necessary repair and prep work to ensure a beautiful and lasting finish. Whether you're painting the inside of your house to update a single room or to finish off a big remodel, an experienced painting pro will deliver excellent results in record time.

Priming is compulsory if you're painting over a darker color, or on a new drywall, but it's a good idea to include this step before any paint job. A primer is necessary because it blocks any stains from bleeding through. It is also important because it prevents any blisters and paint-peeling by improving paint adhesion. Lastly, primer is a good idea as it allows complete single-coat coverage of the walls. If you want a better appearance, you can tint your primer with the final color you intend on using on the walls. Most paints today come with inbuilt primers, but an old school primer is still a better option. Before you start painting, remember to use painter's tape to cover your door frames, window sills, and any switches on the wall.
As you walk through your lighted rooms (preferably day light) see if the new coat has light spots showing the precious paint. This is call "bleeding through". This means that there's only one coat of paint or the paint was diluted or the trasition of colors were from light to dark (or the other way around) and primer was not use or the painter is inexperienced.
Prep. For new work the painter accepts the finish done by the drywall or plaster and once he accepts the work and starts painting he owns any wall repairs. Existing work is a different thing. I take a high intensity light and circle the kinds of defects with chalk so we are all in agreement before they start. Sometimes this results in a higher price and we have to compromise on how much to do...
Here is where this affects you as a consumer. You select a painter with a contract that says 2 coats, $500 down. You give the company the deposit and pick your colors a couple of days before the project starts. The painter goes to the store with your colors and figures out they are deep base. He (or she) not only needs to charge you more for the paint, but he also needs to charge you for a dark gray primer coat. Ninety nine percent of the time that primer coat is going to be really, really expensive since you already gave a deposit.
At Handy, we know that your time is valuable, whether you're a busy professional or a hardworking parent looking after the kids. We won't expect you to take a slice out of your day waiting for your house painting services to arrive. Book an interior painting professional through the Handy platform and you can choose when they arrive. Rest assured that they'll turn up on time, every time.

Before the project began, Warren walked through the home with myself and the paint foreman and ensured we were all on the same page, the crew worked around our schedule and did an amazing job. The estimate and the final bill were exactly the same, they ensured we were 100% satisfied. Great experience and plan on having them back to finish painting the remaining rooms and the exterior of our home when the time comes. Customer and Quality are their top priorities.  


When hiring a contractor it is always best to hire one who is personally referred to you by someone you trust. Hiring through ads or phone book is hit and miss. Check with your local paints stores, they know the good guys from the bottom feeders. Go to the stores that sell the high quality paints like Benjamin Moore(nonpareil), Pittsburg, Sherwin Williams or Glidden. Don't go the the big box stores for referrals, the people there don't know squat!

We are a custom home builder and use Warline Painting. At Kingdom Builders we measure our projects success based on quality, schedule, budget and to never disappoint a client. For us to be successful we evaluate and track the performance of our subtrades to ensure our expectations are achieved. Warline Painting is they type of company we like to work with. Not only can they meet our expectations but they do it with ease. They take pride in their work from start to finish. They stand out because they are very efficient, monitor their own quality, offer colour consultation services and are cable of custom staining & gold leafing, which they did on our most recent project. We recommend Warline Painting!
This article is outdated. Deep based colors were an increase in price back in the 90's. Most stores have a standard price for all colors now. The problems the author are citing are outdated and rarely happen. This is the 2nd time I've seen this article being emailed out, it's irresponsible of angies list to keep sending out this poorly written and inaccurate article.
Primers aren't just diluted paint. They're formulated to establish a solid, even base, seal stains and ensure that the topcoats of paint go on smoothly and bond securely to the surface. "Most homeowners use latex primers, but the pros stick to alcohol and alkyd primers because they'll cover almost anything," says John Weeks, of John the Painter in Mobile, Alabama. Primer can affect the appearance of the topcoat. "It's okay to spot-prime the ceilings but not the walls, because primed spots will show," adds Span.
Plan the budget. Costs will vary greatly, depending on price and quality. Choosing mid to upper-grade paint, expect to pay in the area of $350.00 in paint alone for a 2000 sq. ft. house. Add another $100 to $200 in brushes, rollers, pans, tape, and other materials. Don't forget food, if you plan to feed your workforce. When it comes to materials, not all paints are equal. Some truly cover with one coat, some say they do but don't. Your costs will double if you have to apply two coats to everything, so buying the cheaper paint might cost more in the long run. Trust your paint professional salesman (to a certain degree) to tell you which paint to buy. You can generally go cheap on primer, expensive on top coats.
This article with comments was terrific - it was so informative. I found the advice useful. It addressed specifics like the condition of the dry wall surfaces, any additional repairs such. pin holes, chalking, smoothing of wall surfaces, absorption of paint and number of coats that may be needed. It should also include insurance coverage, and reflect the clean-up afterwards. Having a written contract with the company's letterhead is a must.

It’s important to note that complimentary hues work best with each other when they are of the same value. Referencing the provided color wheel, you’ll notice that each pie wedge is segmented into rings of decreasing size. And the value of each hue changes as the rings get smaller. So, if you’ve decided your kitchen needs to be a pure red (the outermost red), then it’s complimentary color is going to be a pure green (opposite & outermost on the ring).


to be the devils advocate i have been a building contractor 20 of the last 30 yrs. i do know that if you go to a higher sheen of paint and or darker colors then any imperfections in the walls will show up much more dramatically…therefore the painter or a good drywall finisher is needed to prepare the walls extensively. this could cause more expenses…for it takes a lot of time to prep walls (smooth walls..not textured walls) and this cost has to be absorbed.


to be the devils advocate i have been a building contractor 20 of the last 30 yrs. i do know that if you go to a higher sheen of paint and or darker colors then any imperfections in the walls will show up much more dramatically…therefore the painter or a good drywall finisher is needed to prepare the walls extensively. this could cause more expenses…for it takes a lot of time to prep walls (smooth walls..not textured walls) and this cost has to be absorbed.
Watering down the paint 50%? It will not cover. I am a contract painter and found that most people that I make a contract with immediately try to change the deal and get more than they are paying for. Sometimes, I let them cheat me as they may have other work that I wish to do but other times I put my foot down. I try to get the client to look at what I have done each and everyday if I am going from room to room. I cannot do this If I spray the entire project at once. Even when I have them inspect my work, they often just do not tell the truth and wish to scam me the contractor for more and more while paying the same as the original contract. Most people have not a clue how much work is involved in painting a house and just assume that the painter rolls out the work with no prep, sealing off the place to protect things that are not painted. All of my contracts state that if anything is in the way like babies, dogs, cars, plants and furniture that I cannot proceed and that it is their responsibility to move this stuff. I always seem to be turned into a furniture mover and never get paid to wrench my back. Fact is most people try to rob the contractor and this article tries to make it seem that the contractor is robbing the homeowners. My sister is a prime example of this as she always goes for the lowest bid yet expects a world class job. This means if you pay $500 for a two day paint job do not expect the contractor to live at your home for two weeks and make only $500.
A can of paint is generally labeled "low-VOC" if it has less than 100 grams of VOCs per liter for flat sheens and 150 grams for nonflat. Cans that meet standards set by Green Seal, an independent tester and certifier of paints, have even less—no more than 50 grams per liter for flat finishes and 100 grams for nonflat. A "zero-VOC" paint can't have more than 5 grams per liter, according to Environmental Protection Agency standards.

So, you’ve chosen your paint colors (hues & all) with the proper finish for each room of the house. But how do you ensure that moving through each, freshly painted, room won’t make it seem like you changed your mind a few too many times? The answer is easily answered with one word…. Well, two words… baseboards & molding. Though the dominant colors & their respective finishes may vary in each room, you should choose one color & finish for any accent pieces.

Home Interior Painters Design Co

×