We've heard countless stories of people who have been let down by other house painting services. No one wants to take valuable time off of work to wait for painters who never show up. At Handy, we pride ourselves on connecting our customers with reliable and trustworthy residential house painters. They will arrive on time, fully ready to do your job.
Painting techniques like striping, color blocking, stencils, and accent walls are also an option for using color to visually expand a small home. Large horizontal stripes can widen or elongate a room and look especially pretty using colors that are similar. Bold and contrasting colors are daring for a small space while an accent wall allows you to showcase one special area of the room. Try one of these paint colors in your smaller home and be wowed by the pop that the right color can provide.
We recently had the interior of our house painted and are extremely pleased with our entire experience working with Warline. They truly care about their customers, the quality of their work and ensuring their customers are 100% satisfied. This was evident throughout the entire process. The final quote was exactly the same as the initial estimate and Warren came back once the job was completed to do a walk around and ensure we were happy. We will absolutely call Warline again for any future painting projects we have. I highly recommend them.
The problem with painting along the edge of textured ceilings is that it's almost impossible to get a straight line along the top of the wall without getting paint on the ceiling bumps. Pros have a simple solution. They run a screwdriver along the perimeter of the ceiling to scrape off the texture. "This lets you cut in without getting paint on the ceiling texture," one of our pros says. "The screwdriver creates a tiny ridge in the ceiling, so the tips of your paint bristles naturally go into it. And you'll never even notice the missing texture."
A can of paint is generally labeled "low-VOC" if it has less than 100 grams of VOCs per liter for flat sheens and 150 grams for nonflat. Cans that meet standards set by Green Seal, an independent tester and certifier of paints, have even less—no more than 50 grams per liter for flat finishes and 100 grams for nonflat. A "zero-VOC" paint can't have more than 5 grams per liter, according to Environmental Protection Agency standards.
I made the HUGE mistake of hiring Certa Pro to do several interior rooms of my house, and remove popcorn ceiling in a bathroom. What a nightmare! They didn't paint any door jams, they broke a cedar window sill-and didn't bother telling me, they gouged a hardwood floor, they never sealed the room that had the popcorn removed--causing white powder to be in all rooms of a 2 story home. I can go on and on. Horrible company
Before your painter arrives, remove furniture, belongings, wall hangings and window treatments to make it easier for them to get right to work. Once they arrive, your pro will start preparing the inside of your house. Depending on the condition of your walls and the scope of your project, prep work could range from a simple dusting and washing to spackling, sanding, and minor drywall repairs. Your pro may also fill nail holes, caulk cracks around trim, scrape loose paint, skim coat uneven surfaces, mask trim or other surfaces, and apply a coat or two of primer that is suited to both existing and new paints.
When coverage is difficult to estimate, add more rather than less. You can always pour the leftover back into cans. For large jobs, use the bucket and a roller screen rather than a roller tray. It’s much faster to load your roller with the screen than to use a roller pan. Simply dunk the roller into the paint bucket, then roll it along the screen until it stops dripping.
The psychological effect of green is largely dependent on the tone or hue. Some green hues create a positive, natural atmosphere. However, darker hues or pale olive green can seem militaristic or ill. Multiple shades of green can serve different purposes and set different moods. Maritime greens are ideal for studios and offices as they inspire concentration, while cool forest greens can be used in bedrooms and bathrooms.
Friends of ours had their house painted by Warline Painting and were really pleased with the job. When Warren came to our house he had many good ideas about what we should do. Heidi then showed up with help picking our colours. The job was done shortly thereafter and looked great. We were away for a few days and before we had a chance to contact Warren he left a message that he had checked the doors and they needed a little touch up. He had noticed little inperfections and came to fix the problem before we even knew we had them. It is great to finally find a trade company who treats your house as though it's their home.
Most interior painting projects will present corners and edges. Corners, trims, splashes and accents will require cutting in — which generally requires the most patience, preparation and skill. There is a lot of debate among painters whether it is better to cut in before or after applying the roller. Solo painters may want to prepare the surfaces first, apply painter’s tape where required and cut in before applying paint to the rollers. Painters working in teams can split cutting in duties in sections while other team members are applying paint with rollers.
A fellow (actually lives in the same neighborhood) by the name of Wayne Hickey (843-655-0366) painted the ceilings and most of the walls of our house in February 2017. He got paint all over my light fixtures, all over my trim around the doors, and had visible lap marks everywhere on the walls. He came back and rectified some of the problems, but not all, as I have noticed as I have had time to look more carefully at the work he and his assistant did. His assistant had no idea (not a clue) how to roll paint on a wall or ceiling. Some places were not covered. He said he would pull nails for pictures and then re-insert the nails exactly where they were. This he did not do as he promised. He painted over the nails. His assistant had no idea how to use a paint roller. I have painted all my life, and would have done this work myself, but I just had a full knee replacement and the other knee is in bad shape. I just could not do the work. Wayne is a pleasant and congenial individual, but he can not cut in a ceiling or wall to my satisfaction - not even close. He should have a putty knife and wet cloth with him all the time to correct any paint that might get applied where it shouldn't. That is something I always did as a painter. I would not recommend Wayne to paint anybody's home.
This was very helpful. I wonder if i would really follow through and check to see if my painter was cheating me. I used a painter I found on Angie's List. This was 5 years ago. He did a great job. I know he did patching only for about a day and a half. We decided on the kind of paint before he started. that is what he used. I don't know if I could stay on top of him and watch him open every can of paint.
I'm an architect and my firm routinely specifies interior finishes for projects so I thought I'd contribute a professional's perspective on the issue of how many coats of paint are deemed "acceptable". The fact of the matter is the average consumer usually isn't a paint expert and can't be expected to know about all the factors that impact coverage. That knowledge is considered "means and methods" and in a court of law, the responsibility lies with the painter or general contractor, not the consumer. What the consumer should be concerned about is the final result-does it look good and is it what you expected? The simplest way to communicate this to your painter is to stipule in your written agreement that the number of coats will be "as required to cover". That way all the guess work about what kind of primer, how many coats, how color affects the scope of work, etc., is removed from the consumer's responsibility and resides where it belongs-with the professional. In the contract that's why retention is always a good idea-typically 10% is withheld from payment until the job is completed to the satisfaction of the customer. Of course in return you as the customer have to be reasonable about what constitutes a completed job. Just my $.02.
Don't bother taping windows when painting sashes—it takes a long time and paint usually ends up on the glass anyway. Go ahead and let paint get on the glass. Once it's dry, simply scrape it off with a razor blade. The paint peels off in seconds. "Just be careful to not break the paint bond between the wood and the glass," a pro cautions. "Otherwise, moisture can get on the wood and cause rot."
Wonder how much Festool is paying Silva to showcase their outrageously expensive line of tools. He used practically the entire product line on this project that was nothing more than a Festool commercial. I guess the brad nailer company didn't offer any kickbacks to the crew because you never saw their brand name. This show has turned into nothing more than crass commercialism. And when did Silva become a 'master carpenter'. He can't hold a candle to Abrams. Never could. But he's definitely better at milking the sponsors. Would love to see the inside of his workshop.
I managed commercial construction projects for many years, have built and remodeled several properties, and never once have I encountered any of these scams. The tone of this article is deeply troubling. The author seems to be saying that ALL painting contractors are inherently dishonest, and that has not been my experience. The underlying advice here is sound: get it all in writing and cover as many contingencies as possible--so pointing out potential pitfalls like coat coverage is helpful. But do that in the spirit of clear communication of expectations, not with the expectation that the person you are hiring will try to cheat you at every turn. Not every contractor takes outrageous advantage of change orders; not every contractor will sneak past necessary preparation and/or repairs. Contractors of all sorts get a bad rap as it is; reinforcing a stereotype with articles written from this point of view just seems unproductive.
The right paint stroke to use in interior painting is highly debatable. It's not a talent as much as a skill that is learned through practice. Many experts paint in a “W” pattern when using foam rollers, but others simply roll up and down then sideways with either brushes or rollers. The motion isn’t as important as making sure that the application is even and drip-free across the entire area. However, technique is important when you're covering over wall repairs.
Homeowners painting their home, whether it's a new coat or a new house, should ask their contractor about low-emitting paints. As the paint is applied and dries, it can release high levels of VOC's, chemicals that may be toxic to the air your family breathes (not to mention, they stink!). On top of that, these off-gassing chemicals can be absorbed by soft materials already in your home (carpet, furniture, pillow, fabric) and act as a new source to continue releasing harmful chemicals (known as "the sink effect"). There are tons of third party certified low-emitting paints on the market now for more competitive pricing and selection. You can find them listed on my organization's website at greenguard.org (those that we certify) or you can find more info from your contractor :) Happy painting!
If the point of hiring a well established, experienced, reputable painting contractor is to secure the professionalism and trust suggested to be inherent with that choice, then I would EXPECT that professionalism and experience to include the ability to make the proper and correct calculations for labor and materials for a fixed price quote, and there should be NO reason for the contractor to put the cost burden of their miscalculation on the consumer.
When painting a carpeted room, keep in mind that paint will soak through drop cloths. This is especially true of the cheaper, lightweight cloths. It helps to tape masking paper to all of the base boards before laying the drop cloths. Tuck the edges of the cloth under the paper--this will help keep it clean. You might want to invest in a hand-held masking machine--they make the job go much faster. Even after taking these precautions make sure to clean big drops or spills before they soak through and before you step on them!
Just like with roller paint application, painters are not limited to using just one stroke when cutting in. It is important, however, to work towards the edge of the corners applying even pressure. If time permits, painters should allow their cut in work to dry completely before applying paint with rollers, keeping in mind that light touchups on corners and edges will always be required at the end.