Use what the pros use—canvas drop cloths. They're not slippery and they absorb splatters (but still wipe up large spills or they can bleed through). "Unless you're painting a ceiling, you don't need a jumbo-size cloth that fills the entire room," a pro says. "A canvas cloth that's just a few feet wide and runs the length of the wall is ideal for protecting your floor, and it's easy to move."
Painting the doors and the door frames is not always part of the main paint job. There are two main reasons for that. Doors are painted in more durable semi-gloss or satin paint which last longer and is washable. The other reason is cost savings. Painting trim such as doors and door frames is time consuming and relatively more expensive than walls. There are three basic types of painted doors.
Before speaking to a pro, consider how many rooms you would like to paint. Ask yourself if your project will be limited to the walls of the rooms or if ceilings and trim need to be refreshed as well. Since standard equipment is used to prep a work site and apply most finishes, it's usually more economical for you to have multiple rooms painted at once.
Determine the coverage area for each color and estimate the number of gallons you'll need for each. For odd walls with angled ceilings, make your best guess. If you're not comfortable doing this, measure the wall at its highest height and multiply that by its width. Now subtract the lowest height from the highest height, multiply that number by the width, cut that answer in half, and finally subtract that new number from the original height by width. That should give you the wall area.
It pays to be proactive regarding home improvement projects. If you can tackle multiple tasks at once, you end up saving both time & money in the long run. So, before you call the job done, make it a point to inspect your baseboards & molding to see if its time for them to be replaced. Doing this before you tackle the paint on the wall will save you headaches later on & will only add to the facelift you’ve given your home interior.

Prep the house. Wash the walls, remove wallpaper, patch, spackle, seal stains, dry and sand before you attempt to paint. Now is also the time to apply painters tape for trimming, lay drop cloths, etc. Remove all outlet and light switch face plates, collecting screws in a zip-top bag (good opportunity to wash the face plates all at once as well). You can also buy your paint at this time. Don't wait until the last minute. It can take hours to mix many gallons of all your colors. Remember that traffic triples at your home-supply and hardware stores on weekends. Buy on a weekday if possible.

Discovering what it cost to paint the interior of a home can be a little tricky. It all depends on several key factors: the type of paints, the amount of prep needed, how many coats, how large the space is and the amount of protection needed to non painted surfaces and areas. We have painted a bedroom that can take just a few short hours and cost $300 or so dollars on one home and then spend over a week painting a bedroom with two painters and cost over $5,000.
As an owners rep and former estimator for a gc i do expect to pay a reasonable deposit say 10 percent and then weekly progress payments. I am asking the painter to book his time and to do the work on my schedule. Most painting companies are not huge operations they will pay their staff weekly. For most repaints i ask for one tinted primer coat and one finish coat for 100 percent coverage. New work gets one tinted primer and two finish coats for 100 percent coverage. The cost of the paint is not really that different for colors or finish. Brands like european fine paint and C2 are more expensive than Ben Moore and sometimes more difficult to roll based on their consistency. Some home depot brands are as expensive as the Ben Moore and of equal quality others aren't. Red paints are notorious for number of coats required and special priming requirements.
FIRST: Unless you can stay in business painting 1 bedroom at a time for $500-$1000, which you can't, then you will be taking on several thousand dollar contracts that require thousands in Labor and Materials to fulfill the order. Multiply that by 3-4 jobs at one time or in our case 15-20 jobs at a time, YOU NEED TO TAKE DEPOSITS!!! It is horrible business not to take deposits. There are many jobs where its not possible to get a deposit and that is built into or pricing accordingly. If we are not getting a deposit, there is a finance charge built in, contractors are not banks. If you don't have a good feeling about a deposit, your hiring the WRONG CONTRACTOR. Hire people you know or well established businesses.
To get basic measurements, measure the length and width of each wall you want to paint in inches. Multiply the length and height together, and divide by 144. This will give you the square footage for each wall. A gallon of paint typically covers around 400 square feet. In some cases, you may need a primer 2 first, then a single coat of paint, meaning that you may need one gallon of primer and one gallon of paint to cover 400 square feet. However, if the wall requires multiple coats, this will increase the total amount of square footage required, and therefore the amount of paint.
There are two common types of paint that are available for interior projects: smooth and durable oil-based paints and lower-VOC latex paint. Latex paints are used in most residential settings as they dry faster and are easier to clean up. Oil-based paints are harder, making them a good option for trims, floors and furnishings. In addition, there are 5 basic finish options that identify the sheen and hardness of paint. Matte finishes have the least sheen. They are great for hiding imperfections in walls and ceilings, but are the hardest to clean. Eggshell and satin finishes provide more reflection and a smoother surface for easier cleaning, while semi and high-gloss paints provide the highest amount of sheen and durability.
If you are going to hire a contractor (professional painter) give a room by room punch list of the fixing of holes small or big, have it identified for the painter to tell you if you need a drywall finisher or if he does this type of work good. Wall repairs can be 3-5 steps to do repairs ( one per day for good drying of patching material and a good sanding) this is what gives you a good paint job only using high quality paint.
The national average cost for an interior painter ranges between $450 and $900. Interior painters can tackle everything from complete color makeovers in each of your rooms to touching up an accent wall to painting pieces of furniture. The square footage and complexity of the project, along with the materials needed, are the main factors that will affect cost. Other factors include whether you supply the paint yourself or want the painter to do so, whether you move the furniture and do the prep work or ask them to do it, and whether any repair work is needed on the walls. Painting the ceiling and the trim will also have an effect on cost. The type of paint you choose can also raise or lower your house painting cost. A gallon of paint may range from $20 to over $100, depending on quality and brand. Ask your painter if they charge per hour or per square foot, and how much you can save by doing prep work (moving furniture, etc.) yourself.

The cost of paint is about 15-25% of the cost of the contract. Mid grade paint costs about $40 per gallon with contractor pricing. If you are painting your home for real estate purposes and you don’t want to spend a lot of money, there is cheaper paint available. Stay away from anything that costs less than $25, you are buying watered down colour that is difficult to use. If you are thinking of using the most expensive paint available, you can spent over $120 per gallon from manufacturers like Farrow & Ball. Whatever you decide, keep in mind that since labour is your biggest expense, why not use the best paint your budget will allow.

House Interior Painting Design

×