Plan the workforce. If you intend to not hire a professional crew, you'll need lots of help. There are many jobs to be done. First there's the furniture moving, then wall preparation, floor covering, materials gathering and prep, cleaning, and don't forget everyone will have to eat. It can easily take a team of five people a full ten days to paint a two-story (approx 2000 sq.ft.) home. Get as many people to help as you can. If some can only come one or two days, great. Maybe others can fill in. Ensure you plan with your workforce members in mind. They'll need plenty of time to arrange days away from work. Identify a few key personnel:
Lap marks are those ugly stripes caused by uneven layers of paint buildup. They occur when you roll over paint that’s already partly dry. (In warm, dry conditions, latex paint can begin to stiffen in less than a minute!) The key to avoiding lap marks is to maintain a “wet edge,” so each stroke of your roller overlaps the previous stroke before the paint can begin to dry.
Before your painter arrives, remove furniture, belongings, wall hangings and window treatments to make it easier for them to get right to work. Once they arrive, your pro will start preparing the inside of your house. Depending on the condition of your walls and the scope of your project, prep work could range from a simple dusting and washing to spackling, sanding, and minor drywall repairs. Your pro may also fill nail holes, caulk cracks around trim, scrape loose paint, skim coat uneven surfaces, mask trim or other surfaces, and apply a coat or two of primer that is suited to both existing and new paints.
The speed with which a painter can complete the job will determine its final cost, but time is difficult to estimate. Some painters have more experience and cover a wall faster, but some are more methodical and take more time. Most painters should be able to cover about 100 to 120 square feet of flat surface in an hour, unless they are working on a very large wall. Wood or plaster might reduce that amount to 80 to 100 square feet. You should also consider the time required for a first coat to dry before a second coat may be applied. This will add time as well -- anywhere from one to 48 hours depending on the paint.
Generally, it will take a minimum of two gallons of paint to cover a room. At the highest end, paint will cost anywhere between $30 and $60 per gallon and come in three different finishes: flat, semi-gloss or high-gloss. Flat finishes are the least shiny and are best suited for areas requiring frequent cleaning. Semi-gloss finishes are a bit shiny but can also be easily cleaned. A high-gloss finish is stain-resistant and easy to clean. Traditionally, living rooms should be painted with a flat finish to allow the paint to stand out. Glossy finishes should be reserved for hallways, and a semi-gloss is best suited for trim. Invest in pre-primed paint whenever possible. This cuts down on time by combining the layering process. Almost any paint job will require a primer, which will cost anywhere from $7 to $15 per can. Primer helps the paint to stand out against the underlayer of paint it's covering, especially if the new paint is lighter than the old coat. You will need at least two cans of primer, if not more, to cover one wall. Here are some paint brands and their average price per gallon:
Freshly painted walls often look blotchy. The color is uniform, but the sheen isn’t consistent. This usually occurs over the holes and cracks you patched with a filler or drywall compound. The porous fillers absorb the paint, dulling the surface (a problem called “flashing”). When light hits these dull spots, they stick out like a sore thumb. The smooth patch also stands out in contrast to the slightly bumpy texture of the rest of the wall. A quick coat of primer is all it takes to eliminate ﬂashing and texture differences.
Warline Painting Ltd. not only lived up to their Company Philosophy to deliver an end result that exceeds customer expectations but also all the work of other contractors we have used. Extremely professional throughout, from the commitment to starting time, meticulous repair work, excellent staff and clean up each day. We are extremely pleased and have let others know.
When the homeowner is at the point of hiring a painter, they generally will have colors selected or at the very least a color in mind. I always ask for the colors before I bid a job. Dark colors, high sheen colors and specialty finishes require more labor, this drives price. If its not a color change or I'm going over a similar color I give the pricing option of one or two coats. The best advise I can give based on 25 years in the business is to put it all in writing,colors, brands of paint preferred, when the work can be done, who moves furniture and how payment will be handled. I never get up front money. BTW you most definitely get what you pay for with paint. Higher quality products results in and better looking job. Don't be a cheapskate when it comes to paint or the painting contractor.
It takes a lot of skill to paint French doors well and to do it within reasonable time. A painter not only has to be careful with the hinges, door knobs etc, but also be mindful of the adjoining glass surfaces. French doors and casings can cost the customer an average of $200. Please note that casings for french doors tend to be wider and sometimes ornamental.
When we meet with you, we’ll talk about your expectations. We’ll discuss your budget, your needs, your time frame and walk you through our process of what to expect when you hire Warline. We follow that up with a detailed, written estimate that outlines the exact scope of work, the products we’ll use and exactly how much it will cost. We know its likely you are going to be getting another estimate. With ours, you are able to clearly compare what we do against the other estimates and see what makes Warline better.
Before the pros paint walls, they fill holes and patch cracks with joint compound. But if you paint directly over it, the compound will suck the moisture out of the paint, giving it a flat, dull look (a problem called "flashing"). Those spots will look noticeably different than the rest of the wall. To avoid that, pros prime the walls before painting.
Shopping for the right paint should go beyond collecting paint swatches or choosing a shade from the catalogue. Purchasing inexpensive paint samples and small brushes to bring home for testing is the best, because it's the only way to really ascertain whether a color suits the décor. The goal is to paint a small section of the wall — a square with an area of just a few inches is sufficient. Allowing the small painted patch to dry and observing how it looks under the lighting conditions at different times of the day should clear up any painter’s color dilemma.
I have a Home Improvement/Painting business, and Angie's List always advertises that that everyone is out to get them. Of course there are people who try to take advantage of homeowners My reputation and repeat business is based on word of mouth. Shoddy work is always a way to get put out of business quick. As far as strictly painting, preparation is a big factor in getting a quality paint job. If you don't prepare the surfaces you are painting you are spinning your wheels, and wasting money, no matter what paint you use. Getting a deposit from a customer is beneficial, but not always necessary. Sometimes it is a godsend, when you get stuck by the customer, which has happened to me more than once
Most interior painting projects will present corners and edges. Corners, trims, splashes and accents will require cutting in — which generally requires the most patience, preparation and skill. There is a lot of debate among painters whether it is better to cut in before or after applying the roller. Solo painters may want to prepare the surfaces first, apply painter’s tape where required and cut in before applying paint to the rollers. Painters working in teams can split cutting in duties in sections while other team members are applying paint with rollers.
As an owners rep and former estimator for a gc i do expect to pay a reasonable deposit say 10 percent and then weekly progress payments. I am asking the painter to book his time and to do the work on my schedule. Most painting companies are not huge operations they will pay their staff weekly. For most repaints i ask for one tinted primer coat and one finish coat for 100 percent coverage. New work gets one tinted primer and two finish coats for 100 percent coverage. The cost of the paint is not really that different for colors or finish. Brands like european fine paint and C2 are more expensive than Ben Moore and sometimes more difficult to roll based on their consistency. Some home depot brands are as expensive as the Ben Moore and of equal quality others aren't. Red paints are notorious for number of coats required and special priming requirements.
The graph says the average cost to paint a home interior is $1600; at the high end, $4,000. But for what size home? I'm getting estimates for painting an 1800 square foot townhome in the range of about $6500 - which includes sanding and repainting all doors, and painting all trim, walls and ceilings. What does the range above include and for how big of a home? Thanks.
Home Interior Painter