Gray is a timeless color, but it could also be considered drab if not accessorized with bold colors. Anyone who has grown tired of looking at white paint on walls for years should consider gray tones. Gray paint is cooler than its white counterpart and more versatile, as it manages to blend well with most decorations. It is an ideal color for all interior spaces and provides the perfect backdrop for color bursts.
Keeping our work environment clean is an important part of our process. We use Hepa filtered Festool dust-extractors as part of all our of prep and sanding, from drywall repairs to pole sanding. We also clean as we go. This means that for bigger projects that span more than one day, you get the benefit of daily clean up, contained mess and the ability to still function in your home during the project. We understand that renovations and painting can be disruptive to your home life, so we do everything we can to minimize the inconvenience for you and your family.
Most painting companies, including our own, do not price our work on an hourly basis. We can work this way and do on complicated projects. But to give you a good idea of what the hourly rates tend to be, these range from $45-60 a man/hr. Then you have to factor in the cost of materials. This tends to range from 10-20% of the cost of the job depending on the level of quality.
Prep. For new work the painter accepts the finish done by the drywall or plaster and once he accepts the work and starts painting he owns any wall repairs. Existing work is a different thing. I take a high intensity light and circle the kinds of defects with chalk so we are all in agreement before they start. Sometimes this results in a higher price and we have to compromise on how much to do...
Sand the trim with a fine-grit sanding sponge. Sponges get into crevices where sandpaper can’t go and let you apply even pressure. Then apply the ﬁrst coat of paint, let it dry at least 24 hours, lightly sand it again for a completely smooth surface, and apply the second coat. After each sanding, vacuum the trim, then wipe it down with a tack cloth to remove the dust.
To maintain a wet edge, start near a corner and run the roller up and down the full height of the wall, moving over slightly with each stroke. Move backward where necessary to even out thick spots or runs. Don’t let the roller become nearly dry; reload it often so that it’s always at least half loaded. Keep the open side of the roller frame facing the area that’s already painted. That puts less pressure on the open side of the roller, so you’re less likely to leave paint ridges
Most pros don't bother cleaning brushes and rollers if they are going to use them the next day on the same job. "Latex paint dries slowly in cold temperatures," says Maceyunas. For two-day jobs, he wraps the rollers and brushes in plastic grocery bags and sticks them in the refrigerator. "Just allow the roller to return to room temperature before reusing it," he says. Roller covers are almost impossible to clean thoroughly. Most pros buy new covers for each job.