The speed with which a painter can complete the job will determine its final cost, but time is difficult to estimate. Some painters have more experience and cover a wall faster, but some are more methodical and take more time. Most painters should be able to cover about 100 to 120 square feet of flat surface in an hour, unless they are working on a very large wall. Wood or plaster might reduce that amount to 80 to 100 square feet. You should also consider the time required for a first coat to dry before a second coat may be applied. This will add time as well -- anywhere from one to 48 hours depending on the paint.
I can not say enough about the quality of service we received from Warline Painting. We have a renovated house with new drywall - floor to ceiling. I quickly learned that not all drywallers are as meticulous as they should be when it comes to the finished surface. Warren and Amir worked with me to ensure the end result was perfect. They completed my project within the timeframe promised and on budget. That was a first for my entire renovation! I highly recommend Warline Painting to anyone who is looking for a quality painter.
A good paintbrush is key to a professional-looking finish. "A quality brush costs $15 to $25, but you'll discover that pros aren't as talented as you thought," says Doherty. "The equipment has a lot to do with their success." Most of our pros prefer natural-bristle brushes for oil-based paints, but they recommend synthetics for all-around use. When choosing a brush, pay attention to the bristles. Synthetic brushes are made of nylon or polyester, or a combination of the two. Poly bristles are stiffer, which makes them good for exterior or textured work, but for fine interior work, Doherty uses softer nylon brushes. Look also for tapered bristles, which can help you work to an edge, and flagged tips, which help spread the finish smoothly and evenly. Brushes are available in 1- to 4-inch widths. Most painters keep an arsenal on hand to match the job. "Use common sense," says Maceyunas. "A smaller brush gives you more control, but no one wants to paint a door with a 1-inch-wide brush." Doherty recommends starting with a 2- or 2-1/2-inch sash brush. The angled brush makes it easier to cut to a line and puts more bristles on the work than a square-tipped brush.
Third: The contractor buys the materials. We get them at a better rate and customers really don't know what they are getting into by being a material racer. Once again, I'm not referring to the guys that paint a bedroom or 2 a week. Tell the homeowner to go grab 50 gallons of paint, $300.00 worth of sundries and related job cost items and I'd be interested to see how it works for them....IT WILL NOT. And if were talking about people getting taken advantage of here, the paint suppliers with no relationship to a homeowner will 100% GOUGE the customer and completely take advantage of them with pricing. Contractors will pay nearly half the price and will still save the customers money marking up paint 10-15%.
We just had our entire house painted by Warline Painting and couldn't be happier with the job they did. Heidi was wonderful in helping us pick colours that worked well with our decor and our ideas. Warren and his crew were clean, professional and a pleasure to have around. The extensive prep work that was done on our house and their attention to detail really shows in the final product. I have already recommended Warline Painting to friends and family and will be having them come back to our home in the Spring to paint the exterior.
Professional painters have done this before. It’s how they make their living. Through experience, they have learned tricks of the trade and the techniques used to get quality results. They are familiar with the type of paint to use in each situation, know what quality paint is right for each task and know how to achieve a perfectly straight edge – with or without the use of painter’s tape.
Plan the budget. Costs will vary greatly, depending on price and quality. Choosing mid to upper-grade paint, expect to pay in the area of $350.00 in paint alone for a 2000 sq. ft. house. Add another $100 to $200 in brushes, rollers, pans, tape, and other materials. Don't forget food, if you plan to feed your workforce. When it comes to materials, not all paints are equal. Some truly cover with one coat, some say they do but don't. Your costs will double if you have to apply two coats to everything, so buying the cheaper paint might cost more in the long run. Trust your paint professional salesman (to a certain degree) to tell you which paint to buy. You can generally go cheap on primer, expensive on top coats.
Not all people live where they can hire a painting contractor, like you describe. People who live in small towns can only hire painters who have a very small business, and do two or three paint jobs per week. In this case, you do have to be very careful, when you hire a painter, as we have several, in our area, who are out to make a fast buck anyway they can.
If you paint over dirty, oily surfaces, the paint will easily chip or peel off. So before painting, clean grimy areas with a deglosser or heavy-duty cleaner intended for prepaint cleaning. They work well to clean painted, varnished or enameled surfaces to improve the adhesion of the new paint. They’re ideal for cleaning greasy or oily areas like kitchen and bathroom walls and removing hand marks around light switches and doorknobs.
We contracted Warline and their team for the interior painting of our new home, as Warren inspired us confidence and professionalism from the get go. We are so glad we did! Not only did they do a quality job, but they pulled it off in two short days, including prep and clean up. Warren always got back to us quickly when we had questions, and we felt like we were in good hands through the whole process. Great value for our money. Thank you!
Safest way to ensure that everything is fair is to get it ALL in writing , signed by both parties. Specify each item that needs repair. Also, BUY the paint YOURSELF. That way, there is no incentive to water it down, and you KNOW that you are getting the grade/quality you actually purchased. Don't be penny wise and pound foolish; if you are paying to hire a painter, buy the best paint that you can afford, to ensure maximum life of this home improvement.
Recently I had the outside of my home painted. The contractor wrote a good contract, but I failed to realize that some things were not in it. It reminds me of the car dealer who offered a good price on a new car but failed to mention that it did not include tires. My contractor failed to specify that lattice under a porch was included. So the painters did not paint it. To his credit, he did instruct them to paint it when I brought it to his attention. If I had the job to do over again I would look for an individual who came with referrals from happy customers rather than a franchise owner..
I used to work at Sherwin Williams. The best thing to do is specify that you will purchase your own paint. If the painter objects strenuously, he was plaanning on making money in the ways this article outlines. You might pay a few dollars more for paint, but you will have control of the quality of what goes on your walls. Never skimp on paint quality.
It pays to be proactive regarding home improvement projects. If you can tackle multiple tasks at once, you end up saving both time & money in the long run. So, before you call the job done, make it a point to inspect your baseboards & molding to see if its time for them to be replaced. Doing this before you tackle the paint on the wall will save you headaches later on & will only add to the facelift you’ve given your home interior.
You are right on with this - why do people leave switch plates on when it's just so easy to take them off? Another thing that happened to us - we had the popcorn ceiling taken off and the ceiling painted white. When the job was done and I later went to change out all the fixtures/fans, they had left every fixture in place, so there was a large patch of popcorn and unpainted ceiling left behind - it just didn't dawn on me to specify that they take those down before scraping and painting. It was kind of a mess.
Warline did an outstanding job painting the exterior of our heritage home (which was well overdue for a paint job). The amount of preparatory work done was above and beyond what I expected. Their craftmanship in painting is second to none. Heidi's colour advise was invaluable. My house looks stunning It is evident that their crew loves what they do and take pride in their work. One member of the team brought his grandfather by our house to show him what he was working on.
You may have seen some painters advertising a price by the square footage of the floor. Considering all the elements in a room, and all the factors involved, how would anyone price a home interior by the floor space? Maybe if you were painting the floor (or the ceiling) that would be accurate. Stay away from this type of pricing, you are likely dealing with an inexperienced estimator or a company trying to “get the foot in the door” and raise prices later.
Unlike sites which blend pricing from dissimilar jobs, homewyse estimates are based on the Unit Cost method. This method uses job specific detail for superior pricing accuracy and transparency - and has become an industry standard through publications and guidance of leading trade associations, including: PHCCA, the NKBA, the NECA, the AIA, and the ASPE.
Carefully consider the gloss level. The shiny gloss paints are easy to clean, but will make any wall blemish stand out. The flat paints will help disguise wall blemishes, but can be difficult to clean. Generally, you'll want glossier paints where there's lots of steam or cooking (baths and kitchens) and in high-traffic areas. Flatter paints are preferred for large walls and ceilings.
Prime. Dark colors, stains (once sealed), and previously unpainted surfaces (drywall, spackle, etc.) will need a primer coat, usually white. NOTE: most paint stores & home improvement centers will now tint primer (at no charge) to match fairly close to the color of the finished coat, that way two coats of primer need not be applied. Although not all surfaces need a prime coat, skip this step at your peril! Dark colors will likely show through the first -- or even the first couple-- topcoats of paint. Sealants and unpainted surfaces like spackle patches will absorb or repel moisture in a topcoat at a different level than the areas surrounding them. Applying a good primer coat will help even out these differences. Primer equalizes a wall to a uniform surface. It's like erasing a canvas before drawing a new picture. Although some will argue the point, you generally don't need to spend a great deal on primer or buy special primer. A cheap, 5 gallon (18.9 L) bucket of plain, flat white paint will usually do the trick and cover a large area. Give your primer at least 24 hours to dry (follow its instructions) before applying a topcoat.
Our hypothetical, 2 storey 2,000 square foot home is 5 years old and located in the suburbs. The home is lightly furnished and the basement requires no painting. The scope of work includes two coats on the walls of 3 bedrooms, the bathroom & powder room, the stairway and hallways. The main floor has an open space kitchen & a living-dining room with an adjoining family room. The laundry room needs to be painted.
Maybe you've just moved into a new home, and you haven't got around to buying brushes and rollers yet. Perhaps you're worried that your brush-skills aren't that good, and you won't achieve that professional-looking finish that you’re really going for. Handy professionals will turn up with everything they need to get the job done, from ladders and brushes, to rollers and tarps. You just have to provide the interior paint and primer!
The article and comments were great information to have before deciding how to go about getting a painting job done. I think the important point is that there are several key choices (who to do the work; color, sheen, quality, of paint; how many coats; amount of prep/repairs to be done and by whom, how long the job will take, provisions for changes, how detailed the contract needs to be; advanced deposit/progress payments/final payment; final inspection, etc.) that need to be made and it requires advanced research and planning in order to become well enough informed to make the right choices. Then it requires spending sufficient time to check materials and inspect the quality of the work while it is on-going, raher than waiting to do it all at the end. President Reagan's philosophy of "Trust, but verify." applies.
There are two common types of paint that are available for interior projects: smooth and durable oil-based paints and lower-VOC latex paint. Latex paints are used in most residential settings as they dry faster and are easier to clean up. Oil-based paints are harder, making them a good option for trims, floors and furnishings. In addition, there are 5 basic finish options that identify the sheen and hardness of paint. Matte finishes have the least sheen. They are great for hiding imperfections in walls and ceilings, but are the hardest to clean. Eggshell and satin finishes provide more reflection and a smoother surface for easier cleaning, while semi and high-gloss paints provide the highest amount of sheen and durability.