I was taught to paint by a professional and when estimating the amount of paint needed, I always allow for a second coat just to make sure of coverage. We interviewed a painter who tried to tell me I bought poor quality paint without knowing where I purchased it, and stated he would have to buy all new paint. He had not seen the cans and was just guessing so I asked him where I should buy paint from now on. It was the same place I had purchased my paint and he wanted to charge me an extra 20 a gallon more than what I paid for. Needless to say, I have interviewed numerous painters and they are not all honest.

Ideally, you want as much paint on the brush as you can control without making drips or blobs. To do this, Doherty dips his brush about 1 1/2 inches into the paint, then taps (not wipes) each side of the brush against the side of the can. Tapping knocks off the drips and forces the paint into the bristles. "The brush releases the paint just like a fountain pen," he says. Weeks agrees, saying, "Just be sure to keep your brush moving, or it'll start to drip." For more delicate work, such as when you're painting trim or window sash, you'll want less paint on the brush. Doherty again dips and taps his brush, but this time he also scrapes the sides against his can. "The outside bristles are drier and easier to manage," he says, "but there's still plenty of paint on the brush."
When painting a carpeted room, keep in mind that paint will soak through drop cloths. This is especially true of the cheaper, lightweight cloths. It helps to tape masking paper to all of the base boards before laying the drop cloths. Tuck the edges of the cloth under the paper--this will help keep it clean. You might want to invest in a hand-held masking machine--they make the job go much faster. Even after taking these precautions make sure to clean big drops or spills before they soak through and before you step on them!
When we meet with you, we’ll talk about your expectations. We’ll discuss your budget, your needs, your time frame and walk you through our process of what to expect when you hire Warline. We follow that up with a detailed, written estimate that outlines the exact scope of work, the products we’ll use and exactly how much it will cost. We know its likely you are going to be getting another estimate. With ours, you are able to clearly compare what we do against the other estimates and see what makes Warline better.
The article and comments were great information to have before deciding how to go about getting a painting job done. I think the important point is that there are several key choices (who to do the work; color, sheen, quality, of paint; how many coats; amount of prep/repairs to be done and by whom, how long the job will take, provisions for changes, how detailed the contract needs to be; advanced deposit/progress payments/final payment; final inspection, etc.) that need to be made and it requires advanced research and planning in order to become well enough informed to make the right choices. Then it requires spending sufficient time to check materials and inspect the quality of the work while it is on-going, raher than waiting to do it all at the end. President Reagan's philosophy of "Trust, but verify." applies.

We hired Warline to paint our house inside and out as part of our extensive heritage renovation. Warren and his team of experts took the time to find out what we really needed, not just what we wanted. They then set up a plan to get the interior of our house painted amidst complete renovation chaos. Once the outside was ready, they then came back and finished the job by beautifully painting the exterior. They even came on the weekend as it was going to be the only sunny day. It’s the details that make the difference in a good company.
To maintain a wet edge, start near a corner and run the roller up and down the full height of the wall, moving over slightly with each stroke. Move backward where necessary to even out thick spots or runs. Don’t let the roller become nearly dry; reload it often so that it’s always at least half loaded. Keep the open side of the roller frame facing the area that’s already painted. That puts less pressure on the open side of the roller, so you’re less likely to leave paint ridges
The floor and ceiling surfaces cannot be ignored, as they are crucial elements of color combination. Most ceilings are traditionally painted white for a number of reasons — particularly for their ability to keep rooms looking bright and to avoid taking attention away from the walls. Lighter ceiling colors can also help to make a room appear larger and more open.
Not only careful communication is essential, but we would greatly recommend, when you pick out your type and brand of paint that you go and pay for it, with the contractor's discount, which is given by Sherwin-Williams and most paint companies. Then you will know how much paint you purchased and the coverage. If it is possible, inspect the work of the painter daily.
Interesting information! We just got scammed in White Stone, Virginia... we chose the same color, but went from a flat to an eggshell finish. I wasn't available to stand over the painter while he painted. For such a detailed job, I marveled at how quickly he finished the project! After he was paid for the job, we discovered all he did was roll paint across the walls and close to the crown, baseboards and detailed trim around windows and doors leaving about an inch or so of the flat finish. By using the same color, he didn't even do the job he was paid to do, which explained why he could finish the job so quickly. By using the same color... he got lucky and passed it off as a completed job not bothering to paint to and cut in around the trim. Upon further evaluation of our walls we could see exactly where he stopped because we could see the difference between the flat and eggshell finishes. There are walls he didn't even bother to paint. Then where he did paint near the crown when we were in the room watching ... he hit the crown moulding and tried to tell us it was already there... and tried to sell us on painting the crown moulding. I am so disgusted and upset!! He'll be hearing from us to rectify the situation.
This article is outdated. Deep based colors were an increase in price back in the 90's. Most stores have a standard price for all colors now. The problems the author are citing are outdated and rarely happen. This is the 2nd time I've seen this article being emailed out, it's irresponsible of angies list to keep sending out this poorly written and inaccurate article.
Before the pros paint walls, they fill holes and patch cracks with joint compound. But if you paint directly over it, the compound will suck the moisture out of the paint, giving it a flat, dull look (a problem called "flashing"). Those spots will look noticeably different than the rest of the wall. To avoid that, pros prime the walls before painting.
I was taught to paint by a professional and when estimating the amount of paint needed, I always allow for a second coat just to make sure of coverage. We interviewed a painter who tried to tell me I bought poor quality paint without knowing where I purchased it, and stated he would have to buy all new paint. He had not seen the cans and was just guessing so I asked him where I should buy paint from now on. It was the same place I had purchased my paint and he wanted to charge me an extra 20 a gallon more than what I paid for. Needless to say, I have interviewed numerous painters and they are not all honest.
Whether you buy cheap or expensive roller covers, washing them before their first use gets rid of the fuzz that inevitably comes off once you start painting. Wash them with water and a little bit of liquid soap, and run your hands up and down the covers to pull off any loose fibers (a practice called "preconditioning covers"). You can start using the roller covers right away—you don't need to let them dry.
I used to work at Sherwin Williams. The best thing to do is specify that you will purchase your own paint. If the painter objects strenuously, he was plaanning on making money in the ways this article outlines. You might pay a few dollars more for paint, but you will have control of the quality of what goes on your walls. Never skimp on paint quality.
The companies with the best paint products are Benjamin Moore, Dunn Edwards, Sherwin Williams, and Vista Paint. As a painter I don't recommend Berh from Home Depot as much because it's quality is just marketing. Flat paint has no sheen and it shows its true color, but is not easy to wash or clean. Satin, eggshell have low sheen and is washable. Semigloss ang glossy has a high sheen and these paints are recommended for bathrooms and kitchen or where there's high humidity and steam.

Your small bedroom doesn't need an elaborate color scheme to be romantic. The most appealing bedrooms are most often decorated in neutral colors. For a small space, a light neutral makes the room feel spacious and luxurious. Joanna Gaines' Magnolia Home Carter Crème is a wonderful choice for a romantic bedroom because it gives you so many options to accessorize with color.

Wonder how much Festool is paying Silva to showcase their outrageously expensive line of tools. He used practically the entire product line on this project that was nothing more than a Festool commercial. I guess the brad nailer company didn't offer any kickbacks to the crew because you never saw their brand name. This show has turned into nothing more than crass commercialism. And when did Silva become a 'master carpenter'. He can't hold a candle to Abrams. Never could. But he's definitely better at milking the sponsors. Would love to see the inside of his workshop.
When the homeowner is at the point of hiring a painter, they generally will have colors selected or at the very least a color in mind. I always ask for the colors before I bid a job. Dark colors, high sheen colors and specialty finishes require more labor, this drives price. If its not a color change or I'm going over a similar color I give the pricing option of one or two coats. The best advise I can give based on 25 years in the business is to put it all in writing,colors, brands of paint preferred, when the work can be done, who moves furniture and how payment will be handled. I never get up front money. BTW you most definitely get what you pay for with paint. Higher quality products results in and better looking job. Don't be a cheapskate when it comes to paint or the painting contractor.
It pays to be proactive regarding home improvement projects. If you can tackle multiple tasks at once, you end up saving both time & money in the long run. So, before you call the job done, make it a point to inspect your baseboards & molding to see if its time for them to be replaced. Doing this before you tackle the paint on the wall will save you headaches later on & will only add to the facelift you’ve given your home interior.
This was very helpful. I wonder if i would really follow through and check to see if my painter was cheating me. I used a painter I found on Angie's List. This was 5 years ago. He did a great job. I know he did patching only for about a day and a half. We decided on the kind of paint before he started. that is what he used. I don't know if I could stay on top of him and watch him open every can of paint.
The only time it's acceptable to mix water in the paint is when you're using a deep or ultra deep base paint to reduce its stickiness, which is rare with new paint technology. Dark primary colors are composed almost entirely of tint that makes it very hard to work with without adding water. (You never use a sprayer and need to thin paint.?) If i was still in the industry I'd take the time to make a better article than this. Take this for a grain of slat. Use a reputable painter or someone you know you can trust or has been referred to you by someone you trust. I wouldn't hire anyone I had to watch like a hawk to make sure they're not screwing me.
If you are unsure about what colors will work best in a space, you may wish to hire an interior decorator to help. Decorators can look at your furnishings, the size and shape of a room, and the amount of light it gets to help you determine the best shades for the space. Design services cost around $50 to $200 an hour, and can help you find the perfect colors for your home.
Wonder how much Festool is paying Silva to showcase their outrageously expensive line of tools. He used practically the entire product line on this project that was nothing more than a Festool commercial. I guess the brad nailer company didn't offer any kickbacks to the crew because you never saw their brand name. This show has turned into nothing more than crass commercialism. And when did Silva become a 'master carpenter'. He can't hold a candle to Abrams. Never could. But he's definitely better at milking the sponsors. Would love to see the inside of his workshop.

You have to start with a perfectly smooth surface to end up with perfectly painted walls or woodwork. One pro tells PM that Sander would be a more fitting job title than Painter since he spends so much time pushing sandpaper. Sanding levels outs spackle or joint-compound patches and flattens ridges around nail holes. Sanding also removes burrs and rough spots in your trim.
After painting the ceiling, work from the top down: Start with the crown molding, then do the walls and then paint the casement molding around the windows and doors. Do baseboard molding last. "Painting the baseboards last keeps dust and grit from traveling off the floor, onto the brush and then up onto the freshly painted casements," explains Weeks.

Paint won't bond to greasy or filthy surfaces, like kitchen walls above a stove, mudrooms where kids kick off their muddy boots and scuff the walls or the areas around light switches that get swatted at with dirty hands. "I always use a degreaser to clean grimy or greasy surfaces," a pro tells PM. "It cuts through almost anything you have on walls for better paint adhesion."


How much do Painters in Toronto charge to paint a house interior? There are as many answers to this question as there are painters. The prices that are mentioned here are for reference purposes. To prepare an accurate painting estimate, a professional estimator needs a lot of detail. What is the size of the house? Is it empty or occupied? How much prep work is required to achieve a great paint job? Is the home downtown or in the suburbs? Are there time constraints and deadlines? Are there any custom colour or paint preferences? These factors and many more will influence an estimator’s pricing.
Recently I had my kitchen cabinets painted with Warline. The workmanship is incredible. They were always on time, very considerate and managed all the details of my project with great care. During the entire process Heidi made me feel as though I were her only client and always made me feel at ease. I can't recommend Warline enough, and will be calling them every time I need painting.  

Freshly painted walls often look blotchy. The color is uniform, but the sheen isn’t consistent. This usually occurs over the holes and cracks you patched with a filler or drywall compound. The porous fillers absorb the paint, dulling the surface (a problem called “flashing”). When light hits these dull spots, they stick out like a sore thumb. The smooth patch also stands out in contrast to the slightly bumpy texture of the rest of the wall. A quick coat of primer is all it takes to eliminate flashing and texture differences.
The size of the room to be painted is the most important factor in determining the cost of professional painting. It will take a painter longer to cover a large room than a small room, and this means higher labor costs in addition to supplies and time. When estimating the paint for such a job, keep in mind that a gallon of paint covers about 400 square feet (though the label claims it will cover 450 square feet). You will be charged for the number of paint cans needed, among other factors.
×