My wife and I just painted the interior of our house with about 6-8 gallons, of $30+ per gallon (meaning the good stuff, non-diluted) with absolutely fantastic results. However we just paid an average of $5 per gallon. Reason...all big box stores have paint, set aside, that has been mixed but not picked up by the customer. They need to sell it quick and if you're not in a hurry (you know well in advance that a room or two need painting and it's not like the roof leaking and needs an immediate fix) you can go to each store when you need other supplies or food, like Walmart (when convenient, driving 20 miles to each is not worth it) and over the course of a month or two, pick out some very nice colors of quality paint. We found perfect colors...not saying they were our first choice but when we opened the can, very nice and some even better than our original picks. Cost to paint the entire house was about $100, with all materials included, period. We had it on the market for a few months to sell, didn't sell, painted the rooms, got 2 offers the day after we finished, took the best one and never looked back.
Ideally, you want as much paint on the brush as you can control without making drips or blobs. To do this, Doherty dips his brush about 1 1/2 inches into the paint, then taps (not wipes) each side of the brush against the side of the can. Tapping knocks off the drips and forces the paint into the bristles. "The brush releases the paint just like a fountain pen," he says. Weeks agrees, saying, "Just be sure to keep your brush moving, or it'll start to drip." For more delicate work, such as when you're painting trim or window sash, you'll want less paint on the brush. Doherty again dips and taps his brush, but this time he also scrapes the sides against his can. "The outside bristles are drier and easier to manage," he says, "but there's still plenty of paint on the brush."
In most cases, you'll be able to remain in your home during a painting project. However, if you are painting multiple rooms or your entire home it may make sense to stay elsewhere for the duration of the job. If your project involves lead abatement or anyone in your family is sensitive to dust or fumes, you should consider leaving the premises until the job is complete.
To get basic measurements, measure the length and width of each wall you want to paint in inches. Multiply the length and height together, and divide by 144. This will give you the square footage for each wall. A gallon of paint typically covers around 400 square feet. In some cases, you may need a primer 2 first, then a single coat of paint, meaning that you may need one gallon of primer and one gallon of paint to cover 400 square feet. However, if the wall requires multiple coats, this will increase the total amount of square footage required, and therefore the amount of paint.
Warline did an outstanding job painting the exterior of our heritage home (which was well overdue for a paint job). The amount of preparatory work done was above and beyond what I expected. Their craftmanship in painting is second to none. Heidi's colour advise was invaluable. My house looks stunning It is evident that their crew loves what they do and take pride in their work. One member of the team brought his grandfather by our house to show him what he was working on.
First off, the picture on the top THAT IS A HOME OWNERS PAINT JOB. If you here a school kid or your neighbor, this is what you get. I was a painting contractor for the better part of 40 years and never saw a PAINTER (even the worst painter) leave a mess like that. Maybe the electrician or the carpenter but, that is not something a painter could even do if they tried.
Pros prefer 5-gallon buckets with a roller grid to roller pans. They hold more paint than pans and, says Doherty, "It's tougher to tip over a bucket." A bucket also lets you box, or mix, two or three cans of paint to avoid color discrepancies. To use a bucket and grid, dip the roller a quarter of the way into the paint and run it over the ramp to work the paint into the nap.
To paint a large section without leaving lap marks, roll the nearly dry roller in different directions along the dry edge, feathering out the paint as you go. After completing the entire length of the wall or ceiling, move to the next section and paint over the feathered edges. For the second coat, apply the paint in the opposite direction. This crisscrossing paint application sharply reduces (if not eliminates) lap marks.
I have a Home Improvement/Painting business, and Angie's List always advertises that that everyone is out to get them. Of course there are people who try to take advantage of homeowners My reputation and repeat business is based on word of mouth. Shoddy work is always a way to get put out of business quick. As far as strictly painting, preparation is a big factor in getting a quality paint job. If you don't prepare the surfaces you are painting you are spinning your wheels, and wasting money, no matter what paint you use. Getting a deposit from a customer is beneficial, but not always necessary. Sometimes it is a godsend, when you get stuck by the customer, which has happened to me more than once
"I couldn't be more pleased with this painter! He was extremely curtious, listenened to what I wanted and threw in his suggestions when I needed them. The entire house looks wonderful, I'm so gratful for the way it all turned out. I had many, MANY quotes, not only was his the lowest, but he also guaranteed his work and made sure we were happy with it all. Great company, great guy, great paint job. I couldn't be more pleased!! 😊"
If you decide to paint multiple rooms in your home, choose colors that relate to one another without being completely the same -- unless uniformity is your goal, of course. Costs may vary based on differences in color, gloss and room size. However, each room will flow depending on the trim's color -- which should all be white or neutral -- so they look connected. A whole-house color scheme presents the same cost factors as painting multiple rooms individually: colors you choose, the gloss, the size of the rooms and time/labor. You can choose to use the same color throughout your entire home to save on money, or you can use a color scheme with the same gloss throughout, though this isn't recommended for selling purposes.
Prep. For new work the painter accepts the finish done by the drywall or plaster and once he accepts the work and starts painting he owns any wall repairs. Existing work is a different thing. I take a high intensity light and circle the kinds of defects with chalk so we are all in agreement before they start. Sometimes this results in a higher price and we have to compromise on how much to do...
Unless you like textured walls, don't paint over dust. Wash the walls with trisodium phosphate (TSP) or a mild cleaner, like Jasco's TSP No-Rinse Substitute. For smoke-stained walls, Toto uses a 50/50 solution of bleach and water. To clean a wall, use two buckets. Load up your rag or sponge from your cleaning-solution bucket, and scrub. Before redipping, rinse the sponge in a second bucket filled with clean water.
The graph says the average cost to paint a home interior is $1600; at the high end, $4,000. But for what size home? I'm getting estimates for painting an 1800 square foot townhome in the range of about $6500 - which includes sanding and repainting all doors, and painting all trim, walls and ceilings. What does the range above include and for how big of a home? Thanks.