The floor and ceiling surfaces cannot be ignored, as they are crucial elements of color combination. Most ceilings are traditionally painted white for a number of reasons — particularly for their ability to keep rooms looking bright and to avoid taking attention away from the walls. Lighter ceiling colors can also help to make a room appear larger and more open.
Spray Option – $3,800 to $5,500. This package involves removal and spraying of all the doors, drawers, frames and boxes. It’s a good option for high quality existing kitchen cabinets and it’s the closest you can get to a factory finish. Spraying happens off the site, but on site painting can be arranged if the customer prefers it. We suggest installing new and upgraded hardware.
From the start of our experience with Warline to the end, we have been extremely happy with the prompt attention to our enquiries and the profesionalism of not only the owners but also their onsight crew. Heidi did a great job of walking us through our exterior paint options as we were going with a new paint scheme. We are thrilled with the end product which has made us very proud of our home once again. Thank you Warline for your professional approach and attention to detail.
@Neil What is the use of repeating lessons when there is so much more to be learned? Technology has moved on from the adz. Plumbers use PEC, insulation is sprayed, glue-lams allow for open floor plans and furnaces are no longer stoked with coal. As for the new people, if these trades cannot attract fresh blood we will all be unable to get homes built and repairs made. I don't yearn for my first home with the leaky concrete block foundation, failing well pump and an oil furnace held up by the plenum. I'll take heat pumps, solar panels and PVC waste pipes any day.You can get all the sill plate repairs and flitch beams demos you need on YouTube.
This all comes down to the rules.....1. references....does the contractor have them??? I ALWAYS furnish all my prospective customers them....no excuses...2. insurance....again, I always furnish proof....3. Read the proposal carefully...I ALWAYS list materials down to tape used, the brand, the grit of sandpaper, the manufacturer, etc....its INEXCUSABLE to not list all of these items....I am a member of the PDCA, the Painting and Decorating Contractors of America, the foremost authority in the coatings industry and they also approve of what I listed....if you do not follow these guidelines, you will NOT get a job reflective of "professional". Look for the PDCA where any painting contractors are, if they are not a member, RUN!
You are right on with this - why do people leave switch plates on when it's just so easy to take them off? Another thing that happened to us - we had the popcorn ceiling taken off and the ceiling painted white. When the job was done and I later went to change out all the fixtures/fans, they had left every fixture in place, so there was a large patch of popcorn and unpainted ceiling left behind - it just didn't dawn on me to specify that they take those down before scraping and painting. It was kind of a mess.
When painting the trim, you don’t have to be neat. Just concentrate on getting a smooth finish on the wood. Don’t worry if the trim paint gets onto the walls. You’ll cover it later when painting the walls. Once the trim is completely painted and dry (at least 24 hours), tape it off (using an “easy release” painter’s tape), then paint the ceiling, then the walls.
Some contractors work on time and material others on a firm contract. I would never hire the former and am leary of the latter. A contractor may low-ball a bid to get the job planning to make a killing on change orders. If you say good morning to them, they charge you extra for that. If the contract is not very, very specific and extensively fleshed out or if they display their change order schedule prominently on top, show them the door.
Some proposals simply say to paint the walls and ceiling and never specify the number of coats to be applied. If the colors are similar enough, it's possible to get away with one coat of paint and not discount your pricing. No matter how hard you try, tiny, pin-sized air holes will pop exposing the original walls. This may not bother you if you can't notice it, but principally speaking you should have paid your painter less for the work.
This was very helpful. I wonder if i would really follow through and check to see if my painter was cheating me. I used a painter I found on Angie's List. This was 5 years ago. He did a great job. I know he did patching only for about a day and a half. We decided on the kind of paint before he started. that is what he used. I don't know if I could stay on top of him and watch him open every can of paint.
Modern Masters 1 gal. Champagne Metallic Interior Paint Modern Masters 1 gal. Champagne Metallic Interior Paint can be used to create a high-end decorative finish in a variety of circumstances. Use it on a small accent piece or large architectural specification. Durable and long lasting for commercial application yet easy enough for do-it-yourself projects. Special formula contains real ...  More + Product Details Close
OF the different type of customers there are at least two: cheap charley's and people who want great results. I agree the need for wall repair is critical to the end results. Most critical is for the customer to be told ahead that the walls are going to need exactly what is needed. This means the contractor must look, touch, examine the walls for defects and needed work. I've been a building manager for 40 years and seen a few paint jobs. Typically a contractor does a lot of talking about how expert he is, but the guys who walk through with note pads, iPads, examine, measure, point things out, explain and recommend are the ones I will deal with. It confirms if they know what the business. Nobody likes the workers to show up and when you talk about the job they're going to do they know nothing but they we were told to be here. Their boss who bid the job doesn't supervise - a big no no around here. Nobody likes surprises or worse, at the end of a job that's not right getting a bunch of little kid excuses. Contractors that do not like the customer to be around looking at the progress don't get the job.
To industrial and institutional. I also own and operate a professional painting company of elite painters ONLY 5 ELITE PAINTERS, and pay them good money for being elite. Less is better in my opinion.The fact is this a homeowner and a painting company owner can both be taken advantage of by hustlers and liars and amateurs posing as pros. I have had many laborers tell me they can paint. " Oh yes sir I can paint, I'm a painter of 8 years. Yes sir I can cut a straight line." Some people will say and do anything to get a buck. If yoir on the job to see their rookie mistakes you may have time to save your reputation before disaster ensues and fire them on the spot. As a painting Company owner if your not on the job with your crew at least 3 out of 6 days every week your taking a huge risk of damaging your reputation and losing the respect of your team. Homeowners want to deal with you or the crew boss (jobs site supervisor) not "the painter". Many things I have read are right on. Painters for the most part will milk a clock for all they can and still do a good job. But amateurs will leave your projects in shambles and the only ones to pay for it is the contractor and the homeowners. But an elite painter and crew will try to complete a project as quickly as possible and move on to the next one. They understand bonuses, incentives, and promotions. My company provides the opportunity for a homeowner to meet each member of the crew and shake there hand on day one. There is also a differentiation between the crew boss and the crew by the uniforms they wear. Should the homeowners have any issue at all they know exactly who to go to to get results. This eliminates the age old problem of who screwed up? I have found that by me putting on my whites and giving my crew the opportunity to out do themselves on each project it ignites competition, pride in skill, and excellent commraderie amongst the team. We all hold each other accountable. Choose your contractor by the crew not the owner. The crew is a direct reflection of the Company owner. No room for rookies on fine finish painting. Go pro for painting and you won't regret it. With that being said homeowners should always remember that you get what you pay for. With paint and services. In most cases it will be well worth a few extra bucks to get elite results. Never go with the cheapest bid there is always a reason why it's so low.

Before your painter arrives, remove furniture, belongings, wall hangings and window treatments to make it easier for them to get right to work. Once they arrive, your pro will start preparing the inside of your house. Depending on the condition of your walls and the scope of your project, prep work could range from a simple dusting and washing to spackling, sanding, and minor drywall repairs. Your pro may also fill nail holes, caulk cracks around trim, scrape loose paint, skim coat uneven surfaces, mask trim or other surfaces, and apply a coat or two of primer that is suited to both existing and new paints.

The pros were split on this tip. "Masking tape is problematic," says Mark Dixon, a painter in Missoula, Montana, and author of "House Painting Inside and Out" (Taunton Press, 1997). "Paint can bleed behind the tape, or remove the paint it's stuck to." Another problem is bridging. "Latex paints form a skin," says Dixon. "Removing painted tape can tear the skin, resulting in a ragged rather than a sharp line." Lastly, taping takes time. "Learning how to cut in with a brush takes practice, but if you can do it, you'll leave most tapers in the dust," Dixon says. (Cutting in is painting just the surface you want, not the surface adjacent to it — for example, where a wall meets the ceiling.) On the other hand, "If you can't cut in, you can't beat tape," says Span. The pros we spoke with all recommend painter's (blue) tape because it's easier to remove than masking tape. To prevent bleeding, Span uses a putty knife to bed the tape. After letting the paint dry, he scores the edge of the tape line with a utility knife to avoid tearing the paint.
Pros prefer 5-gallon buckets with a roller grid to roller pans. They hold more paint than pans and, says Doherty, "It's tougher to tip over a bucket." A bucket also lets you box, or mix, two or three cans of paint to avoid color discrepancies. To use a bucket and grid, dip the roller a quarter of the way into the paint and run it over the ramp to work the paint into the nap.
I would never suggest that one of my clients buy their own paint because A . They will pay an average of $20 to $30 more per gallon which could add up to $1,000 or more to a full repaint B. most times I'm in the paint store homeowners are kind of pushed to the foreground as they handle all the contractors in the store and C. Paint is heavy, takes up a lot of room needs to be left in it clean dry area and I hate to put a client to work when they are trying to hire me to do their job.
How much do Painters in Toronto charge to paint a house interior? There are as many answers to this question as there are painters. The prices that are mentioned here are for reference purposes. To prepare an accurate painting estimate, a professional estimator needs a lot of detail. What is the size of the house? Is it empty or occupied? How much prep work is required to achieve a great paint job? Is the home downtown or in the suburbs? Are there time constraints and deadlines? Are there any custom colour or paint preferences? These factors and many more will influence an estimator’s pricing.
Your small bedroom doesn't need an elaborate color scheme to be romantic. The most appealing bedrooms are most often decorated in neutral colors. For a small space, a light neutral makes the room feel spacious and luxurious. Joanna Gaines' Magnolia Home Carter Crème is a wonderful choice for a romantic bedroom because it gives you so many options to accessorize with color.
When hiring a contractor it is always best to hire one who is personally referred to you by someone you trust. Hiring through ads or phone book is hit and miss. Check with your local paints stores, they know the good guys from the bottom feeders. Go to the stores that sell the high quality paints like Benjamin Moore(nonpareil), Pittsburg, Sherwin Williams or Glidden. Don't go the the big box stores for referrals, the people there don't know squat!
Modern Masters 1 gal. Champagne Metallic Interior Paint Modern Masters 1 gal. Champagne Metallic Interior Paint can be used to create a high-end decorative finish in a variety of circumstances. Use it on a small accent piece or large architectural specification. Durable and long lasting for commercial application yet easy enough for do-it-yourself projects. Special formula contains real ...  More + Product Details Close
You are right on with this - why do people leave switch plates on when it's just so easy to take them off? Another thing that happened to us - we had the popcorn ceiling taken off and the ceiling painted white. When the job was done and I later went to change out all the fixtures/fans, they had left every fixture in place, so there was a large patch of popcorn and unpainted ceiling left behind - it just didn't dawn on me to specify that they take those down before scraping and painting. It was kind of a mess.
Safest way to ensure that everything is fair is to get it ALL in writing , signed by both parties. Specify each item that needs repair. Also, BUY the paint YOURSELF. That way, there is no incentive to water it down, and you KNOW that you are getting the grade/quality you actually purchased. Don't be penny wise and pound foolish; if you are paying to hire a painter, buy the best paint that you can afford, to ensure maximum life of this home improvement.
Great experience! Tyler came to do estimate and was informative professional and competitive with quote.. Luke was the painter. He was punctual, polite, and thorough. he was quiet and worked efficiently. his work was fantastic. I was concerned about a few steam damaged areas and he worked his magic. The cabinet doors were taken away for a few days then returned looking like brand new doors, can't say enough about this well run company with competitive pricing!!!

The companies with the best paint products are Benjamin Moore, Dunn Edwards, Sherwin Williams, and Vista Paint. As a painter I don't recommend Berh from Home Depot as much because it's quality is just marketing. Flat paint has no sheen and it shows its true color, but is not easy to wash or clean. Satin, eggshell have low sheen and is washable. Semigloss ang glossy has a high sheen and these paints are recommended for bathrooms and kitchen or where there's high humidity and steam.


We contracted with Warline to repaint the exterior of our townhouse complex. This was a complex job with multiple elevations and a demanding client (42 owners to please). Our conclusion was that the job could not have gone better. Warren Nyline and his employees were extremely attentive to detail and ensured that all surfaces were thoroughly cleaned, repaired where necessary and beautifully painted. There were very few deficiencies and those identified were addressed immediately.
I'm an architect and my firm routinely specifies interior finishes for projects so I thought I'd contribute a professional's perspective on the issue of how many coats of paint are deemed "acceptable". The fact of the matter is the average consumer usually isn't a paint expert and can't be expected to know about all the factors that impact coverage. That knowledge is considered "means and methods" and in a court of law, the responsibility lies with the painter or general contractor, not the consumer. What the consumer should be concerned about is the final result-does it look good and is it what you expected? The simplest way to communicate this to your painter is to stipule in your written agreement that the number of coats will be "as required to cover". That way all the guess work about what kind of primer, how many coats, how color affects the scope of work, etc., is removed from the consumer's responsibility and resides where it belongs-with the professional. In the contract that's why retention is always a good idea-typically 10% is withheld from payment until the job is completed to the satisfaction of the customer. Of course in return you as the customer have to be reasonable about what constitutes a completed job. Just my $.02.
Modern Masters 1 gal. Champagne Metallic Interior Paint Modern Masters 1 gal. Champagne Metallic Interior Paint can be used to create a high-end decorative finish in a variety of circumstances. Use it on a small accent piece or large architectural specification. Durable and long lasting for commercial application yet easy enough for do-it-yourself projects. Special formula contains real ...  More + Product Details Close
The Cutters. Someone with meticulous attention to detail and a steady hand should be assigned the job of "cutting in," or painting a straight edge where needed, such as along a wall where the ceiling does not get painted. Many products are available to assist, but none work as well as a person who's good at doing it freehand. Ensure this person is skilled (ask them to show you). A poor, jagged, wavy or splotched cutting-in job will jump out at you every time you walk by it. Why more than one cutter? This job is nerve-wracking and painful to hands and arms after a few days. You'll want to give this person a break after a few walls.
Recently I had the outside of my home painted. The contractor wrote a good contract, but I failed to realize that some things were not in it. It reminds me of the car dealer who offered a good price on a new car but failed to mention that it did not include tires. My contractor failed to specify that lattice under a porch was included. So the painters did not paint it. To his credit, he did instruct them to paint it when I brought it to his attention. If I had the job to do over again I would look for an individual who came with referrals from happy customers rather than a franchise owner..
Hello, I have a sad situation to share -- a friend of mine who is a very good painter, experienced too, fell off a tall ladder that did not have "boots" on it. (I've never seen those.) Anyway, do you think he should have asked for boots before painting? Possibly it was a situation where he was shy to ask because he wanted the job... (I don't know all the details.)
Filling gaps with a paintable acrylic-latex caulk cuts down on drafts and makes your trim look better than new. The secret to using caulk is to cut the tip smaller than you think it should be; too much caulk makes a mess. Also, instead of using a nail to break the inner seal, use a small wire so you don't stretch out the nozzle. Also consider buying a dripless caulk gun, which will automatically back off the pressure after each pull on the trigger to prevent unwanted oozing.
Keep in mind the perceived space of the room. Dark colors tend to make a room look smaller, while light colors open up the space. Test drive your color by investing in a quart-sized (or smaller) can of paint in the color you’re thinking of using before you buy a bigger (and more expensive) can. Paint a small portion of your wall and watch the color in different lights throughout the day so you don’t get stuck with a color that only looks how you want it to look in broad daylight. Stick with neutral colors if you’re planning to sell your home. Keep in mind that buyers want to be able to visualize their things in your home.
Use what the pros use—canvas drop cloths. They're not slippery and they absorb splatters (but still wipe up large spills or they can bleed through). "Unless you're painting a ceiling, you don't need a jumbo-size cloth that fills the entire room," a pro says. "A canvas cloth that's just a few feet wide and runs the length of the wall is ideal for protecting your floor, and it's easy to move."
If the point of hiring a well established, experienced, reputable painting contractor is to secure the professionalism and trust suggested to be inherent with that choice, then I would EXPECT that professionalism and experience to include the ability to make the proper and correct calculations for labor and materials for a fixed price quote, and there should be NO reason for the contractor to put the cost burden of their miscalculation on the consumer.
I am compelled to share my experience with Warline Painting. After frustrating attempts with another company, I found myself compromising quality for cost...this was clearly a mistake. I spent more of my time and money trying to fix things that should have been done right the first time. Not the case with Warline, not only were they professional, knowledgable and friendly but they did a fantastic job! The owner Warren Nyline, personally oversaw our job from beginning to end. This level of service created a feeling of trust, care and security for my family. The communication flowed perfectly between all of us...it felt like a team effort!  
Most interior painting projects will present corners and edges. Corners, trims, splashes and accents will require cutting in — which generally requires the most patience, preparation and skill. There is a lot of debate among painters whether it is better to cut in before or after applying the roller. Solo painters may want to prepare the surfaces first, apply painter’s tape where required and cut in before applying paint to the rollers. Painters working in teams can split cutting in duties in sections while other team members are applying paint with rollers.
You've got me very afraid now, I've been taken in a couple of times since I moved here. They take advantage of me because I am a single woman, not exaggerating! From gardeners to inside work. Wouldn't have house painted but I know my HOA will be after me soon, garage door is peeling and stucco needs repair. Got the $1500.00 deal, but paying more for extra work they say I need.
Lap marks are those ugly stripes caused by uneven layers of paint buildup. They occur when you roll over paint that’s already partly dry. (In warm, dry conditions, latex paint can begin to stiffen in less than a minute!) The key to avoiding lap marks is to maintain a “wet edge,” so each stroke of your roller overlaps the previous stroke before the paint can begin to dry.
These guys are first class. We are going to be building soon, and I will be using this company to do all interior and exterior paint. Heidi and Warren are fully involved from the start to the finish of the project and they are exceptionally helpful. These guys are all wonderful. They show up when they say they are going to show up. They are respectful on the worksite and everyone is friendly and hardworking. Thanks guys. Looking forward to working with you again soon!
So sad that Angie's List requires the contractor be notified!! They have lost me as a client. If I'm dissatisfied and want to give an "F" rating (question/workers...I SHOULD NOT be intimidated into passing up an opportunity to explain my experience! There is NO WAY my contractor got an Aplus rating from over five hundred people....so someone was lying....yet I can't report that without the contractor knowing it? REALLY?
To get basic measurements, measure the length and width of each wall you want to paint in inches. Multiply the length and height together, and divide by 144. This will give you the square footage for each wall. A gallon of paint typically covers around 400 square feet. In some cases, you may need a primer 2 first, then a single coat of paint, meaning that you may need one gallon of primer and one gallon of paint to cover 400 square feet. However, if the wall requires multiple coats, this will increase the total amount of square footage required, and therefore the amount of paint.
I would not recommend this company for the following reasons:1. Original appointment was very specific to them on what was needed and to take photos for 3 apartment unit plumbing fixture repairs. One unit had a bathroom tub/shower backup.2. No photos taken, 3 trips later and only 1 unit completed to satisfaction. (Backup) 3. Other faucets unable to find on line with their suppliers and repair 4. Had to find another plumbing company to complete the jobs. 5. Invoicing had to be redone as not in detail of job address for tax purposes 6. Bad communication throughout the project process with their internal customer service. Their technician and project manager ordering parts. 7. For the back up. Did not bring out correct snake on both trips and had to replace lines as too small to break through backup. Costing over $800 for 3 trips just to complete that situation out. 8. Ordered the wrong parts when 2nd trip out since no photos taken to confirm what was needed. Very dissatisfied and will never ask them to work in any of our rental properties again.
Lastly, chose a sheen to match the needs of the space. Flat finishes hide imperfections well and absorb light which can make the paint look darker. Eggshells and satins are tough enough to be used in family rooms, kids' rooms, and hallways but don’t hide surface imperfection well. Semi-Gloss and high-gloss finishes are primarily used for trim because they accentuate woodwork details and clean up easily.

There are several factors that will affect the cost of painting the interior of your home. These include the size of the project, the condition of your walls, how much prep work is needed, the type of paint used, among others. The cost of labor and supplies ranges from $2-$5 per square foot. Additional costs may apply if you have tall ceilings or ornate trim. Your painter can help determine the best type of paints and approach for your project.

×