Just like with roller paint application, painters are not limited to using just one stroke when cutting in. It is important, however, to work towards the edge of the corners applying even pressure. If time permits, painters should allow their cut in work to dry completely before applying paint with rollers, keeping in mind that light touchups on corners and edges will always be required at the end.
One of the most common comments we receive after a customer has hired Warline to paint their home, is how the house is cleaner than before we came. We believe that when you hire professionals you should get just that – professional service. That means when we are done, we clean up properly and leave your house in better condition then before we arrived. We take our garbage with us and we put your furniture back. We’ll even put back together your stereo equipment and TV so you can get back to life as soon as we walk out your door.
I would love to explore installing this system in our home. Sadly, the nearest gas line is just down the hill from us on the cross-street. Quoted price by New England Gas to bring a gas main 300 feet up hill - $25k, and that doesn't bring it to the house, just the street in front of the house. We have municipal electricity, so the price is low currently, but we have an oil furnace for heat & hot water. Neither of these sounds like a cost-effective replacement for gas.
While painting isn't rocket science there is a lot of job-aquired skill in paint which a professional painter/home remodeler has aquired. There are way to many "EXPERTS" in home repair now and also way too many homeowners that know everything about nothing. As a full home remodeler/repair with over 30 years in the industry most people need to hire a pro and several bids should be the norm for ANY project about to be undertaken. The low bid is hardly ever the best but then again with todays economy a lot of professionals are looking for work. Just BEWARE of any one that comes in and immediately starts talking about lead abatement and air quality as most of these type of "Professional" contractors was probably working as an engineer or a school teacher or some other type of professional last year. Always check references, ask for a list of satisfied customers going back at least ten years and find out how long the individual has been a professional home repair/skilled craftmen in the field of the project you are paying them for...
For first timers, as well as seasoned DIY’ers, picking out paint can be both exciting and daunting. So many options exist from choosing the perfect shade of grey for your in-home office, all the way to the which relaxing hue you’ll be using for your family room. Picking out colors and finishes that compliment each other could consume entire days in the paint aisle before you even consider picking up a brush.
As you walk through your lighted rooms (preferably day light) see if the new coat has light spots showing the precious paint. This is call "bleeding through". This means that there's only one coat of paint or the paint was diluted or the trasition of colors were from light to dark (or the other way around) and primer was not use or the painter is inexperienced.
"Modern paints dry too quickly, and are difficult to brush out," says Dixon, who uses paint additives, such as Floetrol for latex paints and Penetrol for alkyds. "Adding a few ounces per gallon slows drying time and makes the paint more workable," he says. Another problem is bridging. "Latex paints form a skin," says Dixon. "Removing painted tape can tear the skin, resulting in a ragged rather than a sharp line." Lastly, taping takes time. "Learning how to cut in with a brush takes practice, but if you can do it, you'll leave most tapers in the dust," Dixon says. (Cutting in is painting just the surface you want, not the surface adjacent to it — for example, where a wall meets the ceiling.) Although there are mildewcide additives, our pros prefer using bathroom and kitchen paints that have built-in mildew fighters. "These paints will prevent mildew from forming, but they won't kill mildew that's already there," Dixon points out. Because leftover mold spores can live beneath the paint and eventually work their way through to the surface, you should also prep bath and kitchen surfaces. First, wash down the walls with a bleach solution (3/4 cup of bleach per gallon of water) then seal with a stain-blocking primer, such as Zinsser's Bulls Eye 1-2-3 or Kilz's Total One.
The companies with the best paint products are Benjamin Moore, Dunn Edwards, Sherwin Williams, and Vista Paint. As a painter I don't recommend Berh from Home Depot as much because it's quality is just marketing. Flat paint has no sheen and it shows its true color, but is not easy to wash or clean. Satin, eggshell have low sheen and is washable. Semigloss ang glossy has a high sheen and these paints are recommended for bathrooms and kitchen or where there's high humidity and steam.
No need to make special arrangements to check for lead based paint in most instances. Just determine that the paint contractor is a Certified Renovator under the EPA (or state: 10 states so far) Renovation, Repair, and Painting) program. A CR knows how to minimize and contain dust when disturbing lead paint when found. (The CR can also test.) It's usually simple to do so. RRP will add to the cost of the job. The increase is notable for a full exterior paint job if lead based paint found. On interior work, the extra costs are relatively small: a few percent usually. RRP is ONLY about dust from DISTURBING lead based paint.
Buying a can of premium paint, then bait and switch over to low-line products? Again, complete nonsense. Think about it for a moment; the Painter needs 5 gallons of wall finish. So, he buys one can of premium and the rest 'cheap'? How is he going to hide the 4 other gallons? What's he going to hide it in??? He only has ONE gallon of premium. It's not as though he's going to keep older can labels, they would be covered in paint of a different colour.
Steve, not only did you come off with an edge regarding the article written for Angie's list but you came awfully close to being slanderous. The article was written if you will have read his bio by a very well established professional painter. The issue regarding the deposit was put in question by a responder. I have read your response in full as you suggested, and companies as large as yours are just as likely to use the tricks of the trade as the small guy as you suggest, if not more so. A large company has less oversight and workers get lazy with the boss not looking over their shoulder. I have had experience in this area, and thought that i was dealing with a very reputable company that had been recommended by a couple friends, my insurance company, and my adjuster who had dealt with the company. I had terrible problems with the company, who do full restorations and like your company paint in all areas. To finalize your statement that Established businesses do not cheat customers is completly false and is a very misleading statement. I am suprised that Angies list allowed you to post such an outragious comment. All you have to do is look in the Civil lawsuits section of the Established businesses that are being sued or are under investigation for fraud and cheating their customers!