Use a roller to paint the rest of the wall. A good method to use is the 'W method'. You start by painting a large 3 foot (0.91 m) square W on the wall. Then, without lifting the roller, you fill in the W. You can paint a wall section-by-section, and do the walls one at a time for best results. It's generally a good idea to use an extension pole for your roller instead of standing on a ladder. Make sure that neither the extension pole nor the roller has plastic handles, as plastic handles are flexible and this makes it difficult to control the painting.
FIRST: Unless you can stay in business painting 1 bedroom at a time for $500-$1000, which you can't, then you will be taking on several thousand dollar contracts that require thousands in Labor and Materials to fulfill the order. Multiply that by 3-4 jobs at one time or in our case 15-20 jobs at a time, YOU NEED TO TAKE DEPOSITS!!! It is horrible business not to take deposits. There are many jobs where its not possible to get a deposit and that is built into or pricing accordingly. If we are not getting a deposit, there is a finance charge built in, contractors are not banks. If you don't have a good feeling about a deposit, your hiring the WRONG CONTRACTOR. Hire people you know or well established businesses.
It was time to change our peach colored Tudor-style house to something more traditional. Warren came and provided information, an estimate and addresses of projects that the company had done or were in progress. We visited the projects, beautiful! Heidi discussed color selection and it is very helpful to have another knowledgeable person give suggestions. When it came time to actually have the work done, it was done in an efficient, careful manner with attention to detail. We are very happy with the results and plan to have our interior painting done by Warline.
Keeping our work environment clean is an important part of our process. We use Hepa filtered Festool dust-extractors as part of all our of prep and sanding, from drywall repairs to pole sanding. We also clean as we go. This means that for bigger projects that span more than one day, you get the benefit of daily clean up, contained mess and the ability to still function in your home during the project. We understand that renovations and painting can be disruptive to your home life, so we do everything we can to minimize the inconvenience for you and your family.
For tough all-purpose paint with a touch of For tough all-purpose paint with a touch of style choose BEHR PREMIUM PLUS Low Odor Paint & Primer in One Eggshell Enamel Interior paint. This soft subtle sheen resists dirt and grime so it's perfect for all of your home's busiest rooms. The soft velvety reflective appearance will also brighten ...  More + Product Details Close
Most interior painting projects will present corners and edges. Corners, trims, splashes and accents will require cutting in — which generally requires the most patience, preparation and skill. There is a lot of debate among painters whether it is better to cut in before or after applying the roller. Solo painters may want to prepare the surfaces first, apply painter’s tape where required and cut in before applying paint to the rollers. Painters working in teams can split cutting in duties in sections while other team members are applying paint with rollers.
Interesting information! We just got scammed in White Stone, Virginia... we chose the same color, but went from a flat to an eggshell finish. I wasn't available to stand over the painter while he painted. For such a detailed job, I marveled at how quickly he finished the project! After he was paid for the job, we discovered all he did was roll paint across the walls and close to the crown, baseboards and detailed trim around windows and doors leaving about an inch or so of the flat finish. By using the same color, he didn't even do the job he was paid to do, which explained why he could finish the job so quickly. By using the same color... he got lucky and passed it off as a completed job not bothering to paint to and cut in around the trim. Upon further evaluation of our walls we could see exactly where he stopped because we could see the difference between the flat and eggshell finishes. There are walls he didn't even bother to paint. Then where he did paint near the crown when we were in the room watching ... he hit the crown moulding and tried to tell us it was already there... and tried to sell us on painting the crown moulding. I am so disgusted and upset!! He'll be hearing from us to rectify the situation.
Unlike sites which blend pricing from dissimilar jobs, homewyse estimates are based on the Unit Cost method. This method uses job specific detail for superior pricing accuracy and transparency - and has become an industry standard through publications and guidance of leading trade associations, including: PHCCA, the NKBA, the NECA, the AIA, and the ASPE.
As you walk through your lighted rooms (preferably day light) see if the new coat has light spots showing the precious paint. This is call "bleeding through". This means that there's only one coat of paint or the paint was diluted or the trasition of colors were from light to dark (or the other way around) and primer was not use or the painter is inexperienced.
Use a roller to paint the rest of the wall. A good method to use is the 'W method'. You start by painting a large 3 foot (0.91 m) square W on the wall. Then, without lifting the roller, you fill in the W. You can paint a wall section-by-section, and do the walls one at a time for best results. It's generally a good idea to use an extension pole for your roller instead of standing on a ladder. Make sure that neither the extension pole nor the roller has plastic handles, as plastic handles are flexible and this makes it difficult to control the painting.
Yes the pricing does change, and quite significantly. I have worked inside the paint industry on counter sales outside sales and application for over 10 years. One thing many people do not understand is, the resins in the paint are more expensive to produce the higher the sheen goes. Therefore the company is at of higher cost making the paint, which in terms they charge more for the paint. I have seen a 15$ variance between flat-semi-gloss it is not uncommon and is not unrealistic to pay more for a higher sheen. Another thing to add is when doing samples on your wall prior to a painter coming is a good idea, however do not do them in huge squares with heavy coats, remember you are just wanting an idea. A lot of times the issue comes up of the paint not covering the sample coats, in fact it is covering quite well, however the paint sample applied is often times much darker than the wall color, creating a contrasting difference from the lighter surrounding wall and the sample placed on the wall. I recommend getting a piece of sheet rock and using it for the samples so you can move around with it etc.
The perfect roller would hold a roomful of paint, leave the right amount of texture, wouldn't spray or fuzz, and would be easy to clean. Until somebody invents the ideal one, follow these tips to choose the right roller. "The longer the nap, the more paint the roller will hold, but it will also create more texture." says Dixon. "A 1/2-inch nap lamb's-wool roller holds plenty of paint without too much texture," says Dixon. "Less expensive rollers can work," says Span. "Just wash them first in dishwashing liquid to remove any stray fibers." Most of the pros we spoke with prefer 9-inch rollers over 18-inch models -- they are lighter, cheaper, and easier to use. Despite these shortcomings, Maceyunas swears by the wider roller. "The roller can do a whole wall in a few up and down strokes instead of in several dozen W and M strokes," he says.
Painting interior walls is a task better accomplished with foam rollers, because they are easy to use and can evenly cover large surface areas quickly. Foam rollers and brushes should never be overloaded with paint, as it can create drips, uneven coverage and can take longer to dry. It’s easy to get frustrated when the paint is fresh and does not look like a photo from the paint catalog, but remember: that’s something that usually happens after the second coat dries.
Cleaning oil-based paints can be a challenge. Sometimes it’s best to let your tools dry and throw them away. However, if you plan on saving your tools you’ll need mineral spirits, paint thinner or lacquer thinner, a cleaning comb or brush and two metal containers or glass jars with lids. One container will be for clean solvent and the other for dirty solvent.
Your small home is the perfect spot for a sunny little kitchen. A warm yellow like Benjamin Moore's Hawthorne Yellow would look great with white cabinets, subway tile walls, and a weathered gray tile floor. The secret to choosing the right yellow paint color for your small kitchen is to sample light yellow colors first, then increase the intensity if you don't get the look you want right away.
Complimentary colors are not the end all of choosing paint colors. A popular trend these days is the utilization of adjacent colors on the color wheel for accents and multi-toned surfaces. While some color enthusiasts suggest the use of up to 5 colors (and by some we mean very few), it’s not uncommon for 2 adjacent colors to be chosen for a single wall. The way you would choose this is by picking the color you want to be primary on your wall, and go either left or right on the same value ring. Exceptions do exist here, however. You should avoid going from purple to red because, despite the fact that this is a ‘wheel,’ it actually represents the visible portion of the spectrum of light that we can see.
As the homeowner, I've done all of our interior and most of our painting. Whenever you paint, preparation is truly key. Anyone can slap on a coat of paint and call it done. If you want something that looks good and lasts, take the time to clean the walls (also if there is a smoker in the house, nicotine sticks to paint), fill any holes, and take care of any imperfections in the surface. Also, tape off ceilings, door and window frames, and any other place you don't want paint to land. Depending on the size of the room and the number of doors and windows, it might take you 2-3 times the amount of time to prep as to paint. I've never had a contractor paint in my home, but if I did, the first question I'd ask is for a detailed list of how much preparation they would do. If it wouldn't be at least as thorough as mine, I wouldn't hire them. Also, ask about priming before painting, particularly if you're going to cover a darker color with a lighter one. There are now all in one primer/finish paints. If this is not going to be used, ask to have the primer tinted as close to the finish color as you can get.

I hired Warline to repaint a room in my new home. I chose a very dark color and was scared that it might show flaws. Luckily, there was no need to be concerned, because the job was absolutely flawless!! Not only was the work done in an extremely timely manner, but the painter was very courteous, and the work is amazing! The room looks 100X better than before. Thank you Warline - I could not be happier.
Don't hesitate to ask all the questions you need to feel comfortable hiring a professional. You can also ask 3-4 professionals to make sure you have the right quote in mind. You must make sure they have a warranty or some kind of paperwork stipulating the quality of their jobs. Insurance is also a #1 priority to consider, as damage can happen in the process of painting.
One of the most common comments we receive after a customer has hired Warline to paint their home, is how the house is cleaner than before we came. We believe that when you hire professionals you should get just that – professional service. That means when we are done, we clean up properly and leave your house in better condition then before we arrived. We take our garbage with us and we put your furniture back. We’ll even put back together your stereo equipment and TV so you can get back to life as soon as we walk out your door.
Unless you like textured walls, don't paint over dust. Wash the walls with trisodium phosphate (TSP) or a mild cleaner, like Jasco's TSP No-Rinse Substitute. For smoke-stained walls, Toto uses a 50/50 solution of bleach and water. To clean a wall, use two buckets. Load up your rag or sponge from your cleaning-solution bucket, and scrub. Before redipping, rinse the sponge in a second bucket filled with clean water.
Generally, it will take a minimum of two gallons of paint to cover a room. At the highest end, paint will cost anywhere between $30 and $60 per gallon and come in three different finishes: flat, semi-gloss or high-gloss. Flat finishes are the least shiny and are best suited for areas requiring frequent cleaning. Semi-gloss finishes are a bit shiny but can also be easily cleaned. A high-gloss finish is stain-resistant and easy to clean. Traditionally, living rooms should be painted with a flat finish to allow the paint to stand out. Glossy finishes should be reserved for hallways, and a semi-gloss is best suited for trim. Invest in pre-primed paint whenever possible. This cuts down on time by combining the layering process. Almost any paint job will require a primer, which will cost anywhere from $7 to $15 per can. Primer helps the paint to stand out against the underlayer of paint it's covering, especially if the new paint is lighter than the old coat. You will need at least two cans of primer, if not more, to cover one wall. Here are some paint brands and their average price per gallon:
×