Want to know the color you pick will be good in your room? With this tool you can put it on some "walls" before you even paint. Here you can do it with Glidden's room visualizer tool linked below.  Either pick from our selections of rooms or upload your own and you can change walls and trim to find your perfect color. {^widget|(name)CtaButton|(Label)Paint+Your+Room+Online|(Url)https%3a%2f%2fwww.visualizecolor.com%2fglidden%23%2f|(ButtonID)Paint+Your+Room+Online|(Target)_blank|(Color)d6414d|(Edge)btn-rect|(GtmT)cta|(widget_displayname)CTA+Button^}

The old adage says that you get what you pay for. With that in mind, does an expensive paint job guarantee the consumer better quality? Surprisingly, the difference in pricing does not reflect quality differences. Accurate price depends on the estimator’s business knowledge and estimating skills. The estimator of a successful painting company should know his or her “numbers”. How much a customer pays for the job is critical to the success (and often failure) of a contracting business. What is the right price for one contractor could put another out of business.
To maintain a wet edge, start near a corner and run the roller up and down the full height of the wall, moving over slightly with each stroke. Move backward where necessary to even out thick spots or runs. Don’t let the roller become nearly dry; reload it often so that it’s always at least half loaded. Keep the open side of the roller frame facing the area that’s already painted. That puts less pressure on the open side of the roller, so you’re less likely to leave paint ridges
Your home is one of your biggest investments, and with most things in life, you get out what you put in. Get ready to transform the look, feel, and even the value of your home at a competitive price with painting services by New Life Painting. Our professional painters are ready to transform your interior living space – get started with your free estimate today. 
To paint a large section without leaving lap marks, roll the nearly dry roller in different directions along the dry edge, feathering out the paint as you go. After completing the entire length of the wall or ceiling, move to the next section and paint over the feathered edges. For the second coat, apply the paint in the opposite direction. This crisscrossing paint application sharply reduces (if not eliminates) lap marks.
Instead of using white primer, pros usually have it tinted gray or a color that's similar to the finish paint. Tinted primer does a better job of covering the existing paint color than plain primer, so your finish coat will be more vibrant and may require fewer coats. This is especially true with colors like red or orange, which could require three or more coats without a primer.
First off, the picture on the top THAT IS A HOME OWNERS PAINT JOB. If you here a school kid or your neighbor, this is what you get. I was a painting contractor for the better part of 40 years and never saw a PAINTER (even the worst painter) leave a mess like that. Maybe the electrician or the carpenter but, that is not something a painter could even do if they tried.
The companies with the best paint products are Benjamin Moore, Dunn Edwards, Sherwin Williams, and Vista Paint. As a painter I don't recommend Berh from Home Depot as much because it's quality is just marketing. Flat paint has no sheen and it shows its true color, but is not easy to wash or clean. Satin, eggshell have low sheen and is washable. Semigloss ang glossy has a high sheen and these paints are recommended for bathrooms and kitchen or where there's high humidity and steam.
Basic labor to paint home with favorable site conditions. Prep up to 3 hr per 100 SF - clean, scrape, sand and patch up to 4 defects per 100 SF. Caulk gaps and spot prime. Roll / brush 2 coats of paint over lightly textured ceiling/walls. Paint up to 2 doors and door trim per room. Includes planning, equipment and material acquisition, area preparation and protection, setup and cleanup. 129 square feet $93.64 $126.68

Residential house painters on the Handy platform have used countless gallons of paint and tons of brushes over the years. With a wealth of experience under their belts, they know the best, quickest and most cost-effective ways to get the work done. From how to achieve that perfect glossy finish to ensuring no paint drips onto your crown molding, you might find yourself picking up a few tips!
The pros were split on this tip. "Masking tape is problematic," says Mark Dixon, a painter in Missoula, Montana, and author of "House Painting Inside and Out" (Taunton Press, 1997). "Paint can bleed behind the tape, or remove the paint it's stuck to." Another problem is bridging. "Latex paints form a skin," says Dixon. "Removing painted tape can tear the skin, resulting in a ragged rather than a sharp line." Lastly, taping takes time. "Learning how to cut in with a brush takes practice, but if you can do it, you'll leave most tapers in the dust," Dixon says. (Cutting in is painting just the surface you want, not the surface adjacent to it — for example, where a wall meets the ceiling.) On the other hand, "If you can't cut in, you can't beat tape," says Span. The pros we spoke with all recommend painter's (blue) tape because it's easier to remove than masking tape. To prevent bleeding, Span uses a putty knife to bed the tape. After letting the paint dry, he scores the edge of the tape line with a utility knife to avoid tearing the paint.
This is an area that interior painters can easily cut short to save time. Most contracts don't state the extent of the wall repairs included, so it's up to the painter's discretion how much they will do. If it seems like too much work, they'll usually point out the repairs but don't include it in the bid. They'll then ask you if you'd like it fixed after they start your project and let you know how much more it will cost.
Rolling paint from a paint tray is a futile, messy proposition. Here's a faster, neater, better approach: Roll paint directly from a 5-gallon bucket using a paint grid. A paint grid is simply a rectangular, rigid metal or plastic screen that hooks onto the rim of the bucket. Fill the bucket about halfway with paint, then hang the grid inside the bucket. Dip the roller sleeve into the paint, and roll it against the grid to remove excess paint. It's that easy. At the end of the day, drop the grid into the bucket and snap on the lid
The perfect roller would hold a roomful of paint, leave the right amount of texture, wouldn't spray or fuzz, and would be easy to clean. Until somebody invents the ideal one, follow these tips to choose the right roller. "The longer the nap, the more paint the roller will hold, but it will also create more texture." says Dixon. "A 1/2-inch nap lamb's-wool roller holds plenty of paint without too much texture," says Dixon. "Less expensive rollers can work," says Span. "Just wash them first in dishwashing liquid to remove any stray fibers." Most of the pros we spoke with prefer 9-inch rollers over 18-inch models -- they are lighter, cheaper, and easier to use. Despite these shortcomings, Maceyunas swears by the wider roller. "The roller can do a whole wall in a few up and down strokes instead of in several dozen W and M strokes," he says.
Gray is a timeless color, but it could also be considered drab if not accessorized with bold colors. Anyone who has grown tired of looking at white paint on walls for years should consider gray tones. Gray paint is cooler than its white counterpart and more versatile, as it manages to blend well with most decorations. It is an ideal color for all interior spaces and provides the perfect backdrop for color bursts.

Most of the time, the reality is different. Painting  the bulkheads around cabinets is alone more time consuming than painting an entire wall. We dread having to move the appliances and paint behind them. Moving an older fridge is like opening a Pandora’s box. Sometimes the wheels are broken and the refrigerator may damage the floor. Other times, the surfaces behind the appliances are greasy or dusty. In a small kitchen, there isn’t much room and working behind the appliances is uncomfortable. For all the reasons that were mentioned, pricing a kitchen is unpredictable.  A range of $280 to $450 should cover most possibilities.
Even if you plan on painting your home in various shades of white or off white, there is still a fair amount of planning that should go into the project to ensure that you get the results you want. Color and tone have a powerful impact on how a room is perceived, so it’s crucial to take the time to view each room on its own and in conjunction with the rest of the space.
Want to know the color you pick will be good in your room? With this tool you can put it on some "walls" before you even paint. Here you can do it with Glidden's room visualizer tool linked below.  Either pick from our selections of rooms or upload your own and you can change walls and trim to find your perfect color. {^widget|(name)CtaButton|(Label)Paint+Your+Room+Online|(Url)https%3a%2f%2fwww.visualizecolor.com%2fglidden%23%2f|(ButtonID)Paint+Your+Room+Online|(Target)_blank|(Color)d6414d|(Edge)btn-rect|(GtmT)cta|(widget_displayname)CTA+Button^}

Professional painters have done this before. It’s how they make their living. Through experience, they have learned tricks of the trade and the techniques used to get quality results. They are familiar with the type of paint to use in each situation, know what quality paint is right for each task and know how to achieve a perfectly straight edge – with or without the use of painter’s tape.

The speed with which a painter can complete the job will determine its final cost, but time is difficult to estimate. Some painters have more experience and cover a wall faster, but some are more methodical and take more time. Most painters should be able to cover about 100 to 120 square feet of flat surface in an hour, unless they are working on a very large wall. Wood or plaster might reduce that amount to 80 to 100 square feet. You should also consider the time required for a first coat to dry before a second coat may be applied. This will add time as well -- anywhere from one to 48 hours depending on the paint.