@Neil What is the use of repeating lessons when there is so much more to be learned? Technology has moved on from the adz. Plumbers use PEC, insulation is sprayed, glue-lams allow for open floor plans and furnaces are no longer stoked with coal. As for the new people, if these trades cannot attract fresh blood we will all be unable to get homes built and repairs made. I don't yearn for my first home with the leaky concrete block foundation, failing well pump and an oil furnace held up by the plenum. I'll take heat pumps, solar panels and PVC waste pipes any day.You can get all the sill plate repairs and flitch beams demos you need on YouTube.
While painting isn't rocket science there is a lot of job-aquired skill in paint which a professional painter/home remodeler has aquired. There are way to many "EXPERTS" in home repair now and also way too many homeowners that know everything about nothing. As a full home remodeler/repair with over 30 years in the industry most people need to hire a pro and several bids should be the norm for ANY project about to be undertaken. The low bid is hardly ever the best but then again with todays economy a lot of professionals are looking for work. Just BEWARE of any one that comes in and immediately starts talking about lead abatement and air quality as most of these type of "Professional" contractors was probably working as an engineer or a school teacher or some other type of professional last year. Always check references, ask for a list of satisfied customers going back at least ten years and find out how long the individual has been a professional home repair/skilled craftmen in the field of the project you are paying them for...
Homeowners painting their home, whether it's a new coat or a new house, should ask their contractor about low-emitting paints. As the paint is applied and dries, it can release high levels of VOC's, chemicals that may be toxic to the air your family breathes (not to mention, they stink!). On top of that, these off-gassing chemicals can be absorbed by soft materials already in your home (carpet, furniture, pillow, fabric) and act as a new source to continue releasing harmful chemicals (known as "the sink effect"). There are tons of third party certified low-emitting paints on the market now for more competitive pricing and selection. You can find them listed on my organization's website at greenguard.org (those that we certify) or you can find more info from your contractor :) Happy painting!

Wonder how much Festool is paying Silva to showcase their outrageously expensive line of tools. He used practically the entire product line on this project that was nothing more than a Festool commercial. I guess the brad nailer company didn't offer any kickbacks to the crew because you never saw their brand name. This show has turned into nothing more than crass commercialism. And when did Silva become a 'master carpenter'. He can't hold a candle to Abrams. Never could. But he's definitely better at milking the sponsors. Would love to see the inside of his workshop.

As a former professional painter, something that drives me crazy is when I see painters cut in around wall plates. First of all, the amount of time that it takes to cut in is usually much longer than the amount of time that it takes to simply remove the wall plate. Secondly it does not look nearly as clean as it does when the wall plate is removed and thirdly it can invariably leave paint on the wall plate itself which also looks sloppy. Make sure the painter takes them off and then reinstalls them. It's less time.
"Jose was amazing! I had asked for just a quote on a texturing job, and he was over within the hour. Not only did he give me a great quote, but he was able to fit the work in for me that day. He did such a great job mudding and texturing (and really fast for how perfect it came out), that I asked if he could paint the same room and the exterior of my garage as well. He happily agreed and finished all of this in one afternoon! All of my neighbors were impressed. He even went to work on another job while the texture was drying to maximize time. Such a hard worker. He is the man. I definitely kept his number handy for my next project & won't hesitate to call him again. I'd recommend him to anyone."
Decorating a house is a fun but important activity. It is important to make sure the curtains match the walls and the walls match the furniture. Earlier, all interior walls were painted in the same color, and in the same way. Today however, we get to have more fun with colors and textures. It's possible to create a fun effect on your walls using a sponge or even crushed tissue. You may want to paint one wall a different color from the rest of the room. You get to decide what colors you want to use, and how you want them to look on your wall. If you really want to decorate your entire home by yourself, you can even try painting your house by yourself with these 5 easy steps.

If the point of hiring a well established, experienced, reputable painting contractor is to secure the professionalism and trust suggested to be inherent with that choice, then I would EXPECT that professionalism and experience to include the ability to make the proper and correct calculations for labor and materials for a fixed price quote, and there should be NO reason for the contractor to put the cost burden of their miscalculation on the consumer.
"Cutting in is an acquired skill, but it's something you can't do at all with a ratty brush," says Doherty. When cutting in on a wall, he loads his brush and spreads out the excess paint, then works the brush up to the line between wall and ceiling. A brush stroke that's too wide creates a hatband, or smooth brushed band, on the very top of the wall where it meets the ceiling. To avoid this, Dixon recommends rolling first and then cutting in with a brush. "A good roller can get within 1/2 inch of the ceiling," he says. "You'll save time by not brushing more then you have to." When painting baseboards, "a wide taping knife makes a good paint guard," says Span. "Just keep the blade clean to prevent drips from working around the edge of the knife."

Hi Rachel, everyones markup is different based on their own expenses and time spent. The formula in this article is meant more for a painting company with overhead; insurance, licensing, workers comp, advertising (and of course profit). Your markup should not change even if you’re doing it yourself because you are now trading your time for the labor expense, and time is still an expense.
Pros prefer 5-gallon buckets with a roller grid to roller pans. They hold more paint than pans and, says Doherty, "It's tougher to tip over a bucket." A bucket also lets you box, or mix, two or three cans of paint to avoid color discrepancies. To use a bucket and grid, dip the roller a quarter of the way into the paint and run it over the ramp to work the paint into the nap.
You may think you're home safe with a low- or zero-VOC paint, but once it's tinted with the universal colorants used in most paint stores, it could be anything but. On average, these colorants add about 150 grams of VOCs to a gallon; darker shades have more. To get around this, either settle for colors that are factory-mixed or look for paints with no-VOC tinting systems, such as Mythic, Freshaire Choice, or Yolo Colorhouse.
An empty home is less expensive as the painters don’t have to move the furniture and cover it. If the customer does not live in the house, the crews appreciate the opportunity of starting work early or finishing later. The easier scheduling and flexible timelines is a win win for both parties and and our estimator brings this to the client’s attention. 
As an owners rep and former estimator for a gc i do expect to pay a reasonable deposit say 10 percent and then weekly progress payments. I am asking the painter to book his time and to do the work on my schedule. Most painting companies are not huge operations they will pay their staff weekly. For most repaints i ask for one tinted primer coat and one finish coat for 100 percent coverage. New work gets one tinted primer and two finish coats for 100 percent coverage. The cost of the paint is not really that different for colors or finish. Brands like european fine paint and C2 are more expensive than Ben Moore and sometimes more difficult to roll based on their consistency. Some home depot brands are as expensive as the Ben Moore and of equal quality others aren't. Red paints are notorious for number of coats required and special priming requirements.
Painting kitchen cabinets provides the customer great value. Refinishing them can be about 30% of replacement. The majority of cabinets that we paint are made of  varnished wood and need a good quality bonding primer. Before we apply the primer the cabinets get washed and degreased as necessary. Depending on the customer’s situation, the doors and drawers can be removed or they can be painted in place. Professionals prefer to remove them, along with the knobs, hinges and all hardware. If possible the doors are transported to a shop where they get spray painted under a controlled environment. They are brought back to be reinstalled after the paint is cured. We recommend two finish coats of cabinet grade enamel paint.
Hello, I have a sad situation to share -- a friend of mine who is a very good painter, experienced too, fell off a tall ladder that did not have "boots" on it. (I've never seen those.) Anyway, do you think he should have asked for boots before painting? Possibly it was a situation where he was shy to ask because he wanted the job... (I don't know all the details.)
Prime. Dark colors, stains (once sealed), and previously unpainted surfaces (drywall, spackle, etc.) will need a primer coat, usually white. NOTE: most paint stores & home improvement centers will now tint primer (at no charge) to match fairly close to the color of the finished coat, that way two coats of primer need not be applied. Although not all surfaces need a prime coat, skip this step at your peril! Dark colors will likely show through the first -- or even the first couple-- topcoats of paint. Sealants and unpainted surfaces like spackle patches will absorb or repel moisture in a topcoat at a different level than the areas surrounding them. Applying a good primer coat will help even out these differences. Primer equalizes a wall to a uniform surface. It's like erasing a canvas before drawing a new picture. Although some will argue the point, you generally don't need to spend a great deal on primer or buy special primer. A cheap, 5 gallon (18.9 L) bucket of plain, flat white paint will usually do the trick and cover a large area. Give your primer at least 24 hours to dry (follow its instructions) before applying a topcoat.

My happiness is looking at my beautiful old girl. Thank you to Warren for seeing the house's potential that first day and carrying through the plan. Thank you to Sean for fixing up the worn out spots and re-creating the beautiful bits that I hadn't realized the house had! Thank you to Dave and his crew for meticulously bringing life back to the old girl. Your warmth and passion for creating it just right is why my beloved house looks SO GREAT.
I did go with the highest bidder and it did not matter. They did a shoddy job and threatened to take me to court when I pointed out mistakes that they made based on their work standards stated on the quote. I have not paid them yet, just filed a complaint with the BBB. No money down asked, no contract signed. The boss stated I have to high of expectations just because I live in a 121 year old house!
Professional paint crews know what they’re doing. Odds are, they’ve been in the business a while & can crank out a fully prepped room in just a matter of hours. Trim, however, is one of the most time-consuming portions of a room repaint (aside from prep). If you have a lot of trim/detail pieces in a room, keep in mind that this can affect how much it costs to paint.
I'm an architect and my firm routinely specifies interior finishes for projects so I thought I'd contribute a professional's perspective on the issue of how many coats of paint are deemed "acceptable". The fact of the matter is the average consumer usually isn't a paint expert and can't be expected to know about all the factors that impact coverage. That knowledge is considered "means and methods" and in a court of law, the responsibility lies with the painter or general contractor, not the consumer. What the consumer should be concerned about is the final result-does it look good and is it what you expected? The simplest way to communicate this to your painter is to stipule in your written agreement that the number of coats will be "as required to cover". That way all the guess work about what kind of primer, how many coats, how color affects the scope of work, etc., is removed from the consumer's responsibility and resides where it belongs-with the professional. In the contract that's why retention is always a good idea-typically 10% is withheld from payment until the job is completed to the satisfaction of the customer. Of course in return you as the customer have to be reasonable about what constitutes a completed job. Just my $.02.
Your best assurance that a paint is formulated without nasties is a logo from independent testers Green Seal, GreenGuard, or Scientific Certification Systems. They bar more than 1,000 unsafe compounds, including VOCs such as benzene, heavy metals such as cadmium, and plasticizers like phthalates. Green Wise, another tester, bars 26 such chemicals. Can't find logos on products at the paint store? Visit Green Seal, GREENGUARD, Scientific Certification Systems, or GREEN WISE for approved paints.

As the homeowner, I've done all of our interior and most of our painting. Whenever you paint, preparation is truly key. Anyone can slap on a coat of paint and call it done. If you want something that looks good and lasts, take the time to clean the walls (also if there is a smoker in the house, nicotine sticks to paint), fill any holes, and take care of any imperfections in the surface. Also, tape off ceilings, door and window frames, and any other place you don't want paint to land. Depending on the size of the room and the number of doors and windows, it might take you 2-3 times the amount of time to prep as to paint. I've never had a contractor paint in my home, but if I did, the first question I'd ask is for a detailed list of how much preparation they would do. If it wouldn't be at least as thorough as mine, I wouldn't hire them. Also, ask about priming before painting, particularly if you're going to cover a darker color with a lighter one. There are now all in one primer/finish paints. If this is not going to be used, ask to have the primer tinted as close to the finish color as you can get.


Excellent advice because there are many unskilled workers who are "trying to pull the wool over the customers eyes". One has to study about the project for which they are in need. I happen to need dry wall repair and painting done in my home and feel the advice in this article will be a great help to me in hiring someone who is ethical and does good work. Thanks.

We had the exterior of our house painted by Warline Painting last week and I couldn't be more impressed. Everyone we dealt with was so professional and accommodating. It nice to see when a company's moto is "Better Painters" they really mean it. I couldn't be happier and they provided really good value. Every night when I arrive home from work I look at the house and say to myself wow, the house sure looks good, that is a quality paint job. Thank-you Warline, I would highly recommend your services.
Add a stunning splash of color to your Add a stunning splash of color to your home's interior accents with BEHR Premium Plus Ultra Interior Semi-Gloss Enamel. This radiant sheen will help you create a sleek reflective look that brings maximum impact to trim windows and doors as well as indoor furniture and cabinets. Get the beautiful color ...  More + Product Details Close
Modern Masters 1 gal. Copper Penny Metallic Interior Modern Masters 1 gal. Copper Penny Metallic Interior Paint can be used to create a high-end decorative finish in a variety of circumstances. Use it on a small accent piece or large architectural specification. Durable and long lasting for commercial application yet easy enough for do-it-yourself projects. Special formula contains ...  More + Product Details Close
Recently I had my kitchen cabinets painted with Warline. The workmanship is incredible. They were always on time, very considerate and managed all the details of my project with great care. During the entire process Heidi made me feel as though I were her only client and always made me feel at ease. I can't recommend Warline enough, and will be calling them every time I need painting.  
We've heard countless stories of people who have been let down by other house painting services. No one wants to take valuable time off of work to wait for painters who never show up. At Handy, we pride ourselves on connecting our customers with reliable and trustworthy residential house painters. They will arrive on time, fully ready to do your job.
The old adage says that you get what you pay for. With that in mind, does an expensive paint job guarantee the consumer better quality? Surprisingly, the difference in pricing does not reflect quality differences. Accurate price depends on the estimator’s business knowledge and estimating skills. The estimator of a successful painting company should know his or her “numbers”. How much a customer pays for the job is critical to the success (and often failure) of a contracting business. What is the right price for one contractor could put another out of business.
In most cases, you'll be able to remain in your home during a painting project. However, if you are painting multiple rooms or your entire home it may make sense to stay elsewhere for the duration of the job. If your project involves lead abatement or anyone in your family is sensitive to dust or fumes, you should consider leaving the premises until the job is complete.
×