Painting kitchen cabinets provides the customer great value. Refinishing them can be about 30% of replacement. The majority of cabinets that we paint are made of varnished wood and need a good quality bonding primer. Before we apply the primer the cabinets get washed and degreased as necessary. Depending on the customer’s situation, the doors and drawers can be removed or they can be painted in place. Professionals prefer to remove them, along with the knobs, hinges and all hardware. If possible the doors are transported to a shop where they get spray painted under a controlled environment. They are brought back to be reinstalled after the paint is cured. We recommend two finish coats of cabinet grade enamel paint.
I would love to explore installing this system in our home. Sadly, the nearest gas line is just down the hill from us on the cross-street. Quoted price by New England Gas to bring a gas main 300 feet up hill - $25k, and that doesn't bring it to the house, just the street in front of the house. We have municipal electricity, so the price is low currently, but we have an oil furnace for heat & hot water. Neither of these sounds like a cost-effective replacement for gas.
FIRST: Unless you can stay in business painting 1 bedroom at a time for $500-$1000, which you can't, then you will be taking on several thousand dollar contracts that require thousands in Labor and Materials to fulfill the order. Multiply that by 3-4 jobs at one time or in our case 15-20 jobs at a time, YOU NEED TO TAKE DEPOSITS!!! It is horrible business not to take deposits. There are many jobs where its not possible to get a deposit and that is built into or pricing accordingly. If we are not getting a deposit, there is a finance charge built in, contractors are not banks. If you don't have a good feeling about a deposit, your hiring the WRONG CONTRACTOR. Hire people you know or well established businesses.
To maintain a wet edge, start near a corner and run the roller up and down the full height of the wall, moving over slightly with each stroke. Move backward where necessary to even out thick spots or runs. Don’t let the roller become nearly dry; reload it often so that it’s always at least half loaded. Keep the open side of the roller frame facing the area that’s already painted. That puts less pressure on the open side of the roller, so you’re less likely to leave paint ridges
Back to the article. You can add water to all latex based paints / thinner to oil based paint. The tinting base has absolutely nothing to do with it. Say you are working outside and throughout the day you have to add a little water to keep the same consistency. If somebody really tried to add 20% to 50% water they no longer would be painting they'd be performing a whitewash or pickle finish.